能量系统两种基本组合模型及其影响因子的分析

运用小偏差法分析了能量系统的两种基本组合模型中部件的效率、输入量以及各种部件或环节的损率等参数对系统总效率的影响,提议用相关的“影响因子”分析各种因素对系统总效率的影响程度。本文导得的公式与结论,不仅对于探求系统如何合理用能和参数的优化有一定作用,而且对于分析系统的动态特性也将有所裨益。     

Storage of irradiated human blood; a source of error in quantitative chromosome analysis

Summary Human whole blood was irradiated with 2.5 Gy of 220 kVp X-rays and stored before culture with 9.7 M BrdU and 19.4 or 38.7 M BrdU for 0, 24, 48 and 72 h. The frequency of dicentrics and ring chromosomes was determined in cells staining as first division (M1) metaphases with the fluorescence plus Giemsa technique. Storage had no influence on the observed aberration yields in 44 h cultures containing 9.7 M BrdU. In 66 h cultures at 19.4 M BrdU the observed yields after 2 and 3 days' storage were significantly lower as compared to cultures from fresh blood. No storage effect was revealed in 66 h cultures containing 38.7 M BrdU. In cases where cytogenetic radiation dosimetry has to be carried out using blood samples which have been in transit for 2–3 days, the findings are of relevance for a correct determination of the chromosome damage in M1 cells.     

吉木萨尔陆相页岩油微观赋存类型

为了更好地认识页岩油微观赋存状态及类型,避免实验过程中水钻取样对原油分布的影响,选取吉木萨尔页岩典型含油岩芯,采用全程液氮钻、切、磨制样工序,通过全能谱扫描电子显微镜、二次电子成像及背散射相结合的技术手段,获得微观储层矿物类型和结构、储集空间类型、形貌以及C, O, Si, Al, Ca, K, Na,Mg等元素在微、纳米尺度的分布。依据去除矿物因素后的C元素含量分布,判别原油在微、纳米空间尺度的富集程度。结合矿物岩石组构和储集空间形貌,对微、纳米尺度页岩油原油的赋存状态及分布类型进行直观的定量表征,并基于C元素含量推测微观含油饱和度的相对变化。针对原油与孔喉的配置关系,进行储层微观孔喉结构与原油赋存状态的表征,明确原油赋存类型。总结出研究区4种微观原油赋存类型:白云质溶蚀微米级大孔道中的可动油、砂质粒间微纳米级孔中可动油、砂质粒间孔喉壁吸附的半束缚状态的油膜以及自生黏土矿物晶间孔内束缚油。     

油松容器苗和裸根苗生长与造林效果对秋季施肥的响应

【目的】探究不同秋季施肥处理条件下油松容器苗和裸根苗苗期生长、养分积累和造林效果的差异,为生产上培育油松良种壮苗提供理论基础和技术支持。【方法】以大田培育的当年生油松播种容器苗和裸根苗为研究对象,设置0(对照)、12、24、36 mg/株4种秋季施肥水平,于90%以上苗木形成顶芽后进行施肥处理,并于翌年进行雨季造林试验。测定造林前的苗高、地径、生物量、根冠比、养分含量及造林后苗木成活率和苗高、地径相对生长量等指标,分析出圃苗木性状与造林效果之间的相关性。【结果】秋季施肥24 mg/株处理下的油松容器苗苗高、地径、生物量、氮、磷、钾含量均表现最佳,该处理下容器苗整株生物量、氮、磷、钾含量较对照分别增加了41.8%、31.4%、65.6%和48.8%;油松裸根苗受秋季施肥影响较小。容器苗氮含量在各器官中的分布从大到小表现为根>叶>茎,裸根苗氮含量在各器官中的分布从大到小表现为叶>根>茎;磷、钾含量在容器苗和裸根苗各器官中的分布从大到小均表现为叶>根>茎。雨季造林试验结果显示,油松造林效果受苗木类型影响显著,容器苗造林当年和第2年春季的苗高、地径相对生长量...     

不同分级循环加卸载模式下六边形蜂窝能量演化规律

为了阐明循环加卸载路径对六边形蜂窝能量演化的影响规律,设计了3种不同分级循环加卸载试验,揭示了不同分级循环加卸载模式下外界输入总能量、弹性变形能、耗散能、塑性变形能等参数的演化特征及相互关系,研究结果表明：不同分级循环加卸载作用下,蜂窝的初始峰值强度和平台应力与卸载过程蜂窝弹性能的释放程度有关;3种不同分级循环加卸载模式下外界输入总能量、蜂窝的弹性变形能和塑性变形能随着加卸载梯级增大呈现非线性增加的趋势,耗散能在前三级循环作用下随着加载次数增加而减小,在最后一级循环中循环载荷上限较大,扰动效应强于强化效应,耗散能呈现相反趋势;提升循环载荷上限,蜂窝内部损伤增加,且越接近蜂窝初始峰值强度,蜂窝的损伤越严重;同时提升循环载荷下限,蜂窝弹性能释放较少,损伤加剧。     

Improvement in hydrogen storage performance of Mg by mechanical grinding with molten salt etching Ti3C2Clx

Mg-based materials are currently a hot research topic as hydrogen storage materials due to their considerable theoretical hydrogen storage capacity. However, the kinetic performance of hydrogen absorption and desorption of Mg is too slow and requires high temperature, which seriously hinders the application of this material. MXene is a new type of two-dimensional material with significant role in improving thermodynamics and kinetics. In this experiment, a two-dimensional layered MXene containing Cl functional group was prepared by molten salt etching using the Ti-containing MAX phase as the raw material. Then different ratios of Ti₃C₂Cl_x were uniformly dispersed onto the surface of Mg by high energy ball milling. The samples were characterized by hydrogen absorption and desorption kinetics, SEM, XRD, XPS, and DSC to investigate the effect of Ti₃C₂Cl_x on the hydrogen absorption and desorption performance of Mg. The onset hydrogen absorption temperature can be reduced to room temperature and the hydrogen release temperature is reduced by 200 ​°C by doping Ti₃C₂Cl_x. And there is also 5.4 ​wt% hydrogen storage in the isothermal hydrogen absorption test at 400 ​°C. The results of DSC demonstrate that the E_a of Mg+15 ​wt% Ti₃C₂Cl_x was reduced by 12.6% compared to pristine Mg. The ΔH is almost invariable. The results of XPS show that the presence of multivalent Ti promotes electron transfer and thus improves the conversion between Mg²⁺/Mg and H⁻/H. This study provides a guideline for further improving the hydrogen absorption and desorption performance of Mg-based hydrogen storage materials.     

鄂尔多斯盆地长7储层致密油水平井CO2补充能量与吞吐参数优化

长7储层是鄂尔多斯盆地主要的致密区块,近一半的致密油分布其中。针对长7储层开采渗透率低、开采难度大、依靠弹性开采产能较低、能量衰竭较快等问题,通过数值模拟的方法,构建水平井分段压裂数值模拟模型,首先对比不同吞吐方式对油田产能的影响,优选出CO₂吞吐为首选的补充能量方式。其次对井网形式、井网参数及吞吐参数进行优化研究。最终优选出合适的吞吐方案,达到提高生产效率的目的。结果表明,该储层的最优注采吞吐参数为：周期注入量为2 673 t、注入压力为21 MPa、注入速度为90 t/d、焖井时间为10 d。研究对鄂尔多斯盆地长7储层提高采收率具有一定的参考意义。     

不同热管工质对热管冷却反应堆堆芯物理参数的影响与分析

热管冷却反应堆采用非能动传热技术,热响应速度快,可避免堆芯单点失效,具有功率密度大、寿命长、环境适应性强、工作性能稳定等特点,是目前空间核反应堆研究的热点。本文基于清华大学开发的反应堆蒙特卡洛中子输运程序RMC (Reactor Monte Carlo code),以美国爱荷华国家实验室(Idaho National Laboratory, INL)设计的热管冷却反应堆INL Design A为研究对象,选取3种热管工质开展热管冷却反应堆堆芯物理计算。计算结果表明：锂热管工质不仅拥有很好的热物性参数,并且使用锂热管工质的热管冷却反应堆缓发中子有效份额最大、中子能谱较硬、燃耗反应性损失最小、增殖性能最佳,有利于热管冷却反应堆堆芯小型化与长寿命。因此,推荐锂为热管冷却反应堆的热管工质。     

图的一种加权邻接矩阵谱半径和能量的界

图G的一种加权邻接矩阵记为A_db(G)=(a^db_ij)_n×n,若顶点v_i和顶点v_j相邻,则$a_{i j}^{d b}=\frac{d_{i}+d_{j}}{d_{i} d_{j}}$, 反之a^db_ij=0.给出图G的加权谱半径的上下界,并在此基础上给出加权谱半径的Nordhaus-Gaddum-type关系.得到了图G的加权能量的几个上下界,并在此基础上给出加权能量的Nordhaus-Gaddum-type关系.     

悬浮预热器中的换热分析

本文通过分析悬浮预热器的传热机理,讨论了颗粒的加速过程和换热时间对分散和换热的影响,论述了分散不良引起的“准短路”对分散、换热及能量损失的影响,并指出可以通过温熵图计算不可逆损失。