湖南老爹公司营销存在的问题及对策

老爹公司经过几年的发展成效显著,但还存在诸如营销战略规划和营销管理人才缺乏、营销渠道不畅、产品质量缺乏保障、广告宣传缺乏力度等主要问题,通过分析提出了加强营销战略规划和危机意识教育,增强公司市场竞争力、树立品牌战略、稳定产品质量、加强广告宣传、提升营销人才的整体素质等对策,以进一步促进老爹公司的发展和壮大.     

High-altitude salt lake elevation changes and glacial ablation in Central Tibet, 2000-2010

This research quantifies lake level variations in the Siling Co, Co’e and Bangor Co salt lakes in Central Tibet from 1976 to 2010, and most notably for the 2000-2010 periods. In particular, the effects of different water replenishment modes on the lakes have been analyzed. Here we have provided new evidences for climate warming and accelerated glacial ablation on the Central Tibetan Plateau from 2000 to 2010. Based on fieldwork involving Differential Global Positioning System (DGPS) surveying and Remote Sensing (RS) interpretations of the lake area, we have drawn the following conclusions. (1) From 1976 to 2010, the process of lake level variation in Siling Co can be divided into two stages. From 1976 to 2000, the lake level rose 4.3 m in a steady fashion (from 4530 to 4534.3 m); the rise rate was 0.18 m/a. From 2000 to 2010, the lake level rapidly rose 8.2 m (from 4534.3 to 4542.5 m), with a dramatically higher rise rate of 0.82 m/a. Compared with the rapidly increasing lake level of Siling Co from 2000 to 2010, the fluctuations observed at Co’e and Bangor Co were smooth and inconspicuous. (2) From 1976 to 2009, the lake area of Siling Co experienced a steady-rapid-steady expansion pattern. The lake area of Siling Co increased 656.64 km2 in the 34 years to 2010, a proportional growth of 39.4%. This was particularly significant in the 2000-2010 period, when the lake area of Siling Co increased by 549.77 km2, a proportional growth of 30.6%. (3) According to correlation analysis, the rise in regional temperatures, which has led to the ablation of glaciers, is the main reason for the rapid rise in Siling Co lake levels in the 10 years to 2010. During this period, Siling Co rose approximately 8 m as the direct result of glacial melting. An increase in precipitation in the Siling Co catchment area is the secondary factor. This contrasts with Bangor Co, where the dominant factor in lake level change is the long-term increase in precipitation; here, the increasing temperature is the secondary factor.     

采用多波束智能天线的蜂窝移动通信系统同频干扰的分析

采用多波束智能天线 ,可以降低移动通信系统的同频干扰 ,增加移动通信系统容量。在蜂窝移动通信系统快衰落与慢衰落统计特性的基础上 ,建立了基于多波束智能天线的同频干扰的统计模型 ,考虑了中断概率、每小区信道数、射频保护比、同频干扰均值及方差等参数 ,对智能天线提高移动通信系统容量分析奠定了基础     

退火时间对Co膜磁滞标度律的影响

采用磁控溅射法制备了多晶的Co薄膜,研究了退火时间对磁滞标度律的影响.实验结果表明,Co薄膜具有比较复杂的结构和沿膜面的易磁化方向,退火时间较长,具有更强的磁各向异性.     

超细晶粒WC—Co硬质合金的收缩与晶粒长大

采用复合烧结工艺（真空烧结＋热等静压烧结）制备超细晶粒ＷＣ－Ｃｏ硬质合金,研究了烧结过程中的超细合金的收缩及晶粒长大行为。结果表明,在常规的固相烧结阶段,局部微区内的液相烧结使超细晶粒ＷＣ－Ｃｏ硬质合金的收缩及晶粒长大行为不同于普通晶粒硬质合金。在此阶段,ＷＣ晶粒出现较严重的早期晶粒长大现象,导致合金的收缩占总体收缩量的９０％以上。     

Co_(0.2)Fe_(2.8)O_4多孔微球的制备及磁性研究

用溶剂热法结合奥斯特瓦尔德熟化过程制备Co0.2Fe2.8O4多孔微球.用X射线衍射仪(XRD)和扫描电子显微镜(SEM)表征样品的结构和形貌,发现所制备的单分散Co0.2Fe2.8O4多孔微球是由许多纳米颗粒组装而成.用振动样品磁强计(VSM)测量样品在不同温度下的磁性,发现其饱和磁化强度随温度升高先保持稳定后快速降低,而矫顽力随温度升高持续减小.     

Co基合金激光熔覆层组织及近表面结晶方向

采用同步送粉式激光熔覆工艺在45^#钢表面制备了Stellite Co基合金涂层。利用光学显微镜、扫描电镜（SEM)、附件（EDS）及X射线衍射仪分析了熔覆层的快速凝固微观组织特征和相结构。熔覆层初生相为γ-Co枝晶，枝晶间为γ-Co及Cr23C6共晶组成。在熔覆层的近自由表面，发现了一种新的、结晶方向与激光扫描速度方向平行的细小枝晶。熔覆层与基体界面为平面结晶，向中心过渡为胞状晶、柱状枝晶等多种形态。两道熔覆层的搭接区组织粗化，且出现准等轴晶、等轴晶。     

柠檬酸溶胶-凝胶法制备Ca3Co2O6粉体及表征

以柠檬酸为络合剂,采用溶胶-凝胶法制备出Ca3Co2O6粉体,利用TG-DTA,XRD,FT-IR,SEM等手段对Ca3Co2O6进行了表征.实验结果表明,干凝胶的煅烧温度在950℃之间,时间2 h,可制备纯相Ca3Co2O6粉体.该粉体的形貌为蠕虫状,直径0.6μm,长约3 μm.     

锂源对固相合成LiNi_(0.5)Co_(0.2)Mn_(0.3)O_2正极材料性能的影响

采用高温固相法烧结制备得到正极材料Li Ni0.5Co0.2Mn0.3O2,通过X射线衍射(XRD)、扫描电镜(SEM)以及循环伏安(CV)、交流阻抗(EIS)等电化学性能测试手段,探讨高温烧结工艺中不同锂源对材料结构、形貌及电化学性能的影响,结果表明,采用Li OH作为锂源合成的材料与采用其他锂源相比,具有较好的层状结构和电化学性能.该材料在0.1C倍率下的首次充放电容量和库伦效率较高(172.7 m Ah/g,89.08%),在0.5C、1C倍率下循环50次后,材料的放电容量仍保持在144.5 m Ah/g和136.2 m Ah/g.     

内燃式等离子体点火装置在漳泽电力蒲洲发电分公司的应用

介绍了内燃式等离子体点火燃烧器在漳泽电力蒲洲发电分公司的成功应用情况,分别从工作原理、系统组成、运行控制参数等方面对内燃式等离子体点火燃烧器进行了剖析,并探讨了其经济效益。