基于声发射的超声谐振频率在线监测系统研究

采用基2FFT算法原理编制了快速傅里叶变换程序,利用计算机声卡采集数据,通过测量超声振动系统的声发射信号,实现了超声振动系统谐振频率的在线实时监测。该系统为评价超声加工效果,分析加工过程中的力及其他加工参数对振动系统的影响提供了手段。     

基于隐马尔可夫模型的公交乘客出行链识别方法

以公交IC卡数据为基础,结合公交站点周边土地类型及乘客时空转移序列构建隐马尔可夫模型对乘客的出行目的进行识别,继而实现完整乘客公交出行链的提取。采用石家庄某一工作日的公交IC卡数据来实现模型,并与同日期的公交乘客出行调查数据对比,结果表明模型与实际调查结果较为吻合,工作日公交乘客出行链以通勤类出行链为主,总占比达81.87%,通勤活动具有很强的时效性。本文模型为公交IC卡数据的深度研究提供了一定的基础。     

在线签名认证的数据采集系统设计

在线动态签名认证由于其安全性和方便性,广泛适用于银行金融系统以及个人身份识别等.作为在线签名笔迹的数据采集,对后续认证的准确性显得尤为重要.利用STM32F103C8、触摸屏、触摸屏控制器TSC2046和SD卡,实现了对在线笔迹包括压力在内的3维数据采集以及存储.实验结果表明,设计的在线签名数据采集系统精度高,稳定可靠,抗干扰能力强,具有很好的认证效果.     

Microstructure and heat treatment for Ni3Al-based single crystal alloy with different crystal orientations

Ni₃Al-based single crystal alloy IC6SX with different crystal orientations were prepared by seed crystal method. The microstructure and heat treatment of the alloy were investigated. The results showed that the microstructure of the alloy was in dendrite structure, and the crystal orientation had significant effect on the dendrite morphology of this alloy. The precipitated phases of (MoNi)₆C and NiMo appeared in the microstructure of the three alloys with different crystal orientations during solidification process. Compared with other two alloys, the volume fractions of precipitated phases of both (MoNi)₆C and NiMo was the most in the alloy with [111] orientation and the least in the alloy with [001] orientation. The solidus and liquidus temperatures of the alloy IC6SX tested by differential scanning calorimetry (DSC) were 1356 °C and 1387 °C, respectively. Meanwhile, the effect of different solution temperatures on the microstructure of the alloy with different orientations was studied. The results showed that the precipitated phases of (MoNi)₆C and NiMo were eliminated with the solid solution treatment under the condition of 1300 °C/10 h. However, the incipient melting of the alloys occurred due to the dissolution of low melting point phases. As the temperature dropped to 1280 °C, the area of incipient melting in the alloy with different orientations decreased gradually. However, there was no incipient melting appearing in the three alloys with different orientations when the solution treatment temperature dropped to 1260 °C.     

智能卡操作系统高速下载设计

通过对智能卡下载机制的研究,进行改进设计提高智能卡操作系统的下载速度。     

校园一卡通系统的开发与安全实现

介绍了校园一卡通系统的结构和智能卡的应用规划,对一卡通的网络安全建设进行了分析研究。     

基于射频识别技术及CAN总线网络的“家学通”无线公话设计

采用PHILIP ARM7系列处理器LPC2292及射频卡识别技术对学生、教师身份进行识别,并用CAN总线来实现无线电话机和一卡通服务器通信,然后利用西门子GSM TC35I手机模块完成无线通话功能的实现方案.     

A View on Wear Mechanism of Metallic Card Clothing

The wear mechanism of metallic card clothing, used in textile industry, was analyzed. A fast wear test for metallic card clothing racks was developed, which was used as collecting the wear metal particles. The failure type of card clothing was analyzed by the mean of scanning electron microscopy （SEM） and ferro-spectrum technology. The results show that the main wear mechanism of metallic card clothing is low load and high repetition interval fatigue wear caused by friction force between fiber and metal wire teeth. The appropriate quenching microstructure, which improves the wear resistance of the metallic card clothing rack is also discussed.     

高校图书馆电子阅览室服务创新探析

随着网络技术的高速发展以及读者需求的多元化,高校图书馆电子阅览室服务创新成为必然趋势。通过创新服务理念和服务模式、构建电子阅览室信息共享空间、建立起一套崭新的服务机制,可实现电子阅览室的可持续发展。     

基于MSP430f2274的非接触式IC读卡器的设计与实现

针对非接触式13.56M读写器在功耗高、体积大等方面问题,提出了一种低功耗、高安全性的研究模型。模型采用MSP430F2274为主控芯片和MF RC522为射频芯片,在保证通信稳定、抗干扰力强、通信距离能达到10cm的前提下,可以使系统有效降低功耗和体积。经实验,结果表明系统3.3V供电完全适合MF RC522供电要求,实现了低功耗的完美结合。