铜及铜合金薄带轧制的润滑及冷却分析

铜及铜合金薄带轧制过程中润滑-冷却是一项十分重要的工艺.讨论了轧机润滑冷却系统的组成、工艺润滑的分类和作用原理,工艺冷却的作用;分析了工艺润滑剂的种类、使用要求、品质评价体系以及维护要求和做法,对铜及铜合金薄带轧制润滑油的选择提出了自己的观点.     

Silane as Electrolyte Additives for Lithium Ion Batteries

1 Results In order to overcome the inherent incompatibility of PC with graphite in the lithium ion battery system, improve their electrochemical performance at low temperature,phenyl tris-2-methoxydiethoxy silane (PTMS) has been studied as an additive to the PC-based electrolyte of lithium ion batteries with graphite anode. From the cyclic voltammogram for the graphite anode in the PC-based electrolyte,we find that in the case of the electrolyte without the additive,there is a large irreversible peak ne...     

Low temperature synthesis of NiO/Co3O4 composite nanosheets as high performance Li-ion battery anode materials

NiO/Co3O4 composite nanosheets have been synthesized via a facile method at low temperature for the first time.The as prepared materials were characterized by X-ray powder diffraction(XRD) and transmission electron microscopy(TEM),and the performance of Li-ion batteries(LIBs) as anode materials were also studied.By controlling the atom ratio of Ni:Co,not only the size of the nanosheets can be controlled,the electrode’s conductivity and stability could also be greatly improved.The composite material showed a stable capacity retention during cycling(87% of the second capacity was retained after 15 cycles) even at a relatively large current rate(400 mA/g).The NiO/Co3O4 nanosheet might be promising candidate anode materials in high performance Li-ion batteries.     

柠檬酸协助的Y2 O3 包覆LiNi1/3 Co1/3 Mn1/3 O2材料性能研究

采用溶胶凝胶法,以硝酸钇和柠檬酸为原料对LiNi1/3Co1/3Mn1/3O2进行包覆. 室温下,在2.8～4.3 V和1 C充放电条件下,以柠檬酸协助的Y2O3包覆LiNi1/3Co1/3Mn1/3O2材料作为正极,锂片作为负极,制成的电池50次循环容量没有衰减,而未加柠檬酸的Y2O3包覆LiNi1/3Co1/3Mn1/3O2材料50次循环容量保持率为96.72%,未经过包覆的材料只有91.03%.     

水热法制备Co3O4及其超电容性能的研究

以硝酸钴为原料、尿素为沉淀剂、柠檬酸三纳为模板,用水热法制备了Co3O4,并采用循环伏安、恒流充放电等方法研究了样品的电化学性能.结果表明,Co3O4电极在6mol·L-1KOH溶液中、在0～0.4V电位范围内、电流密度为5mA·cm2时,单电级比电容可达900F·g-1.     

晋城煤业集团科技创新能力分析

利用科技统计对晋城煤业集团在科技创新中的优势和劣势进行了分析，并进一步提出了对策及改进措施。     

载钴沸石上Co^3＋的还原作用

本文釆用XRD,XPS,TGA和TPR-XRD技术考察浸渍钴HZSM-5沸石催化剂的还原作用,结果表明:浸渍型载钴沸石经焙烧后,钴主要以Co_3O_40.形态存在于沸石外表面,其粒度为350(?)左右。同时有部分钴离子进入孔内与H~+进行交换,以类似Co(OH)_2形态存在于沸石内表面。500℃还原后,还原度随载钴量增加而增大,其大于57%,粒度在250-270(?)间。还原过程中,出现2个TPR峰,分别相应于过程中的Co~(3+)→Co~(2+)→Co二个阶段,各阶段的特征温度依次为:591-624°K;644-658°K。     

食品、饮料中咖啡因的检测及定量分析

采用薄层层析方法，实验表明在０．３～０．７μｇ范围内咖啡因斑点面积的平方根与含量的对数值呈线性关系，可应用于食品、饮料中咖啡因的检测及定量分析。此法取样量微、结果直观、重现性好。最低检测量为２×１０－９ｇ／ｍＬ。     

添加剂对高铁赤泥煤基的直接还原行为

分析了添加剂对内配煤高铁赤铁泥团块还原焙烧的作用，建立了还原动力学模型──收缩未反应核模型，探讨了添加剂对渣铁分离的影响，并最终获得了了一种新的高效“Ｏ”型添加剂。     

提高十八烷胺防硝酸铵结块能力初探——无梯粉状硝铵炸药系列研究之二

文章在分析硝酸铵的物理特性及十八烷胺防结块机理的基础上,通过试验,证明采用十八烷胺与某些渗粉剂及表面涂复剂复配,能有效地提高防止硝酸铵结块硬化的能力。