LiNi0.5Co0.5O2的制备及其电化学性能

分别以碳酸盐和氢氧化物为原料,合成了LiNi0.5Co0.5O2.研究结果表明:用氢氧化物为原料,在氧气气氛中,适当提高合成温度和延长反应时间均有利于LiNi0.5Co0.5O2晶格结构的完整;在740 ℃和氧气气氛下,以氢氧化物为原料反应15 h可以合成结构理想的LiNi0.5Co0.5O2;LiNi0.5Co0.5O-2的初始放电容量与LiCoO2的初始放电容量相当,达到141.3 mA·h/g,以LiNi0.5Co0.5O2为正极的电极系统具有稳定的电压输出和良好的循环性能,经200次循环后放电容量保持率为82%,可作为LiCoO2的廉价替代物.     

5-硝基水杨醛缩乙二胺双希夫碱钴(Ⅲ)配合物的合成、晶体结构及热稳定性研究

利用水热法合成了一例新的超分子配合物——5-硝基水杨醛缩乙二胺双希夫碱钴(Ⅲ)配合物.通过元素分析、红外光谱和X-射线单晶衍射等手段对其组成、结构进行了研究,并对合成条件进行了探讨.结果表明,配体采用四齿螯合的方式与金属钴离子配位,配合物结构单元之间通过分子间氢键构筑得到了配合物的超分子网络结构.热重分析表明,配合物具有良好的热稳定性.     

w(Co)对CB2钢显微组织和力学性能的影响

为研究w(Co)对CB2钢微观组织和力学性能的影响，调整CB2钢中w(Co)为0.5%，1.0%，1.5%，2.0%和3.0%.利用光学显微镜(OM)、扫描电镜(SEM)、室温拉伸等检测方法研究w(Co)对试验钢微观组织和力学性能的影响规律，结合Thermo-Calc和JMatpro-7.0模拟结果解释其影响机理.研究发现:w(Co)增加提高铬当量的值，使试验钢中δ铁素体含量减少，当w(Co)增加到1.5%时，δ铁素体基本消失;材料的抗拉强度随w(Co)的增加而增加，而延长率则先增加后降低;结果表明，w(Co)为1.5%时综合性能较好，即抗拉强度达到805.13MPa，延长率达到20.4%，布氏硬度为260.     

铁磁性金属Co的合成及形貌控制

通过简单的水热法成功合成了不同维度、不同形貌的金属Co单质,如六角片状、柱状、杨桃状等结构。前驱体混合溶液中乙二胺的剂量可以调节反应体系pH值的反应速度。-NH2可以选择性的吸附在不同的晶面上以改变其晶面的生长速率,合成出不同维度的单质Co磁性纳米材料。在溶液中加入了不同量的十二烷基磺酸钠表面活性剂,改变不同晶面的表面能,在一定程度上改变晶体的生长方式,最终合成出了不同形貌的单质Co颗粒。通过对不同形貌的颗粒进行磁学参数的检测,可知室温下二维片状Co的饱和磁化强度远小于柱状,而矫顽力有较大的提高,同时,表面粗糙的样品具有较大饱和磁化强度和较小矫顽力。     

Influences of ultrasonic irradiation on the morphology and structure of nanoporous Co nanoparticles during chemical dealloying

The Co-61.8 wt% Al nanoparticles of 45 nm were prepared by hydrogen plasma-metal reaction (HPMR) method. The nanoparticles display core shell structure with Al13Co4 and CoAl core and aluminum oxide shell (about 2 nm). Under ultrasonic irradiation, nanoporous fcc-Co nanoparticles were produced successfully by chemically dealloying the Co-Al nanoparticles at room temperature, whereas, without ultrasonic irradiation CoAl phase could hardly react with sodium hydroxide solution. At 323 K the Co-Al nanoparticles could be dealloyed to fcc-Co and hcp-Co phases even without ultrasonic irradiation. The surface area of the dealloyed nanoparticles under ultrasonic irradiation was larger than that of the dealloyed sample without ultrasonic irradiation at the same temperature. It is believed that the microjet and shock-wave induced by ultrasonic irradiation give rise to particles size reduction, interparticle collision and surface cleaning, and accelerate the dealloying process and the phase transformation.     

氧化锌薄膜的制备及掺Co2+对结构和性能的影响

采用溶胶-凝胶方法在Si(111)衬底上制备了ZnO:Co氧化锌薄膜,利用X射线衍射(XRD)仪和振动样品磁强计(VSM)分别测试了样品的结构和磁性.实验表明,采用溶胶-凝胶方法制备的掺Co2+氧化锌薄膜具有(002)峰的择优取向,同时ZnO:Co薄膜在室温情况下呈现出铁磁性.     

生物淋滤溶出废旧锂离子电池中钴的研究

考察不同培养条件对生物淋滤溶出钴的影响,研究提高钴生物溶出效率的方法和工艺条件. 研究表明:在硫磺质量浓度为4 g/L,起始pH为2.0,培养温度为27 ℃时,当电极混合材料的质量浓度为1%的条件下,淋滤12 d后钴的溶出质量浓度可达306 mg/L. 降低淋滤体系起始酸度(pH为1.0)和改变淋滤液硫源组合(2 g/L硫磺和2 g/L黄铁矿)可以有效提高钴的生物溶出效率,淋滤12 d后钴的溶出质量浓度高达1 682 mg/L,溶出率超过90%.     

A high-resolution environmental change record since 19 cal ka BP in Pumoyum Co,southern Tibet

A 380-cm-long sediment core was acquired from the deep water area of Pumoyum Co, southern Tibet. Twenty-five plant residue samples were selected, and organic carbon stable isotopes were obtained using the AMS ¹⁴C chronological method. The ¹⁴C age and carbon reservoir effect were calibrated with surface sedimentation rate measurements using ²¹⁰Pb dating. Results showed that the core sediment deposited over 19 cal ka BP. Based on a multi-proxy analysis of TOC and IC contents, grain size and pollen assemblage data, the palaeoclimatic evolution of Pumoyum Co was reconstructed since the last glacial. Pumoyum Co was a shallow lake prior to 16.2 cal ka BP; although the glacier around the lake began to melt due to increasing temperatures, climate was still cold and dry. In the interval of 16.2–11.8 cal ka BP, the sedimentary environment fluctuated drastically and frequently. Two cold-events occurred at 14.2 and 11.8 cal ka BP, and these may correspond to the Older Dryas and the Younger Dryas events, respectively. After 11.8 cal ka BP, Pumoyun Co developed into the deep lake as it is now. The lake water temperature was relatively lower at that time because of influx of cold water from glacial meltwater entering the lake. As a result, the multi-proxy indicators showed no sign of warm conditions. Comparisons between the sedimentary record of Pumoyum Co with that of other lakes of the same age in southern Tibet indicate a warmer climate following the last deglaciation influenced the southeastern Tibetan Plateau. These results imply that the southwest Asian monsoon gradually became stronger since the deglaciation during its expansion to the inner plateau. The glacial-supplied water of the lake responded sensitively to cold-events. The entire southern Tibet region was dominantly influenced climatically by the southwest Asian monsoon during the Holocene.     

Silane as Electrolyte Additives for Lithium Ion Batteries

1 Results In order to overcome the inherent incompatibility of PC with graphite in the lithium ion battery system, improve their electrochemical performance at low temperature,phenyl tris-2-methoxydiethoxy silane (PTMS) has been studied as an additive to the PC-based electrolyte of lithium ion batteries with graphite anode. From the cyclic voltammogram for the graphite anode in the PC-based electrolyte,we find that in the case of the electrolyte without the additive,there is a large irreversible peak ne...     

放电等离子烧结制备Ca2Co2O5陶瓷过程中Co价态分析

采用(NH4)2C2O4共沉淀法制备出CaC2O4和CoC2O4前驱物,在800℃对前驱物煅烧8 h得粉体组成为Ca2Co2O5,Co3O4,CaO,该粉体经放电等离子烧结(SPS)后所得陶瓷块体为纯相Ca2Co2O5,利用X光电子能谱(XPS)分析了烧结前后样品中Co元素价态.