Improvement in hydrogen storage performance of Mg by mechanical grinding with molten salt etching Ti3C2Clx

Mg-based materials are currently a hot research topic as hydrogen storage materials due to their considerable theoretical hydrogen storage capacity. However, the kinetic performance of hydrogen absorption and desorption of Mg is too slow and requires high temperature, which seriously hinders the application of this material. MXene is a new type of two-dimensional material with significant role in improving thermodynamics and kinetics. In this experiment, a two-dimensional layered MXene containing Cl functional group was prepared by molten salt etching using the Ti-containing MAX phase as the raw material. Then different ratios of Ti₃C₂Cl_x were uniformly dispersed onto the surface of Mg by high energy ball milling. The samples were characterized by hydrogen absorption and desorption kinetics, SEM, XRD, XPS, and DSC to investigate the effect of Ti₃C₂Cl_x on the hydrogen absorption and desorption performance of Mg. The onset hydrogen absorption temperature can be reduced to room temperature and the hydrogen release temperature is reduced by 200 ​°C by doping Ti₃C₂Cl_x. And there is also 5.4 ​wt% hydrogen storage in the isothermal hydrogen absorption test at 400 ​°C. The results of DSC demonstrate that the E_a of Mg+15 ​wt% Ti₃C₂Cl_x was reduced by 12.6% compared to pristine Mg. The ΔH is almost invariable. The results of XPS show that the presence of multivalent Ti promotes electron transfer and thus improves the conversion between Mg²⁺/Mg and H⁻/H. This study provides a guideline for further improving the hydrogen absorption and desorption performance of Mg-based hydrogen storage materials.     

由单片机AT89C51构成的定时控制系统

介绍了单片机ＡＴ８９Ｃ５１,给出了由ＡＴ８９Ｃ５１构成的定时控制系统,并将此系统与ＣＰＵ８０３１构成的单片机系统比较,具有结构简单、可靠性高的特点．     

复合材料设计的原理与实践

对复合材料设计的原理与实践进行简要介绍,对其研究现状与发展趋势进行评述．重点在于工程结构复合材料,特别是航空航天领域应用的先进复合材料,重点是仿生与机敏材料设计,材料设计的目的是实现材料性能优化．     

海芋凝集素的理化性质鉴定

采用葡聚糖凝胶１００（ＳｅｐｈａｄｅｘＧ－１００）从天南星科植物海芋（Ａｌｏｃａｓｉａｏｄｏｒａ（Ｒｏｘｂ）Ｃ．Ｋｏｃｈ）中分离出了一种凝集素（简称ＡＯＬ）．ＡＯＬ对兔血有较强的凝集效果,而对各类型人血的凝集活力较弱,在３种糖蛋白中,猪甲状腺球蛋白对ＡＯＬ的凝血活力抑制最强;ＡＯＬ对培养人外周血白细胞的转化率高达７９％,超过对照ＰＨＡ的转化率;用ＳｅｐｈａｄｅｘＧ－２００柱测得ＡＯＬ的相对分子质量为３１５００;用癌细胞体外培养的方法证明了ＡＯＬ对肺腺癌细胞株Ｐ１８具有较强的直接杀伤能力．此外还发现ＡＯＬ对温度（８０℃以下）、变性剂（盐酸胍和脲）有较高的稳定性,在ｐＨ６～１０的范围内相当稳定．     

C60溶液,孤立分子及薄膜形态电子态结构分析

系统地给出了Ｃ６０在固态薄膜及不同有机溶液形态下的常规吸收光谱和三同商吸收光谱,确定了各相关光学跃迁能量,并通过对可见区电子－－振动光谱结构的指认分析,给出了有机溶液形态下Ｃ６０的能隙,基于Ｍａｘｗｅｌｌ－Ｇａｒｎｅｔｔ有效介质模型理论,由不同有机溶剂形态下Ｃ６０电子态能级结构参数外推获得了Ｃ６０孤立分子的本征电子态能级结构参数,从而为详细了解和研究Ｃ６０分子不同形态下电子态结构的变化提供了较完整     

Photoconductivity of fullerene derivatives

Two fullerene derivatives (compounds 1 and 2) have been synthesized. Their redox properties have been measured by cyclic voltammetry. The photoconductivities of poly(N_vinylcarbazo_le) (PVK) doped with fullerene and with their derivatives have been studied to explore the possible relationship between the reductibility of fullerenes and the photoconductivity of fullerenes_doped PVK. The charge generation efficiencies of PVK doped with fullerene and with its derivatives have changed remarkably: the diversity of charge generation efficiency is obvious in different doping systems. The result indicates that there is charge transfer between fullerenes and PVK.     

用于智能材料与结构的NiTi丝的电阻特性研究

研究了拉伸过程中,ＮｉＴｉ形状记忆合金丝的应变与电阻的关系．结果表明,对于初始组织为马氏体的ＮｉＴｉ丝,在拉伸过程中,电阻与应变之间成线性关系．对于初始组织为奥氏体或奥氏马氏体两者混合的ＮｉＴｉ丝,当发生应力诱发马氏体相变后,曲线的斜率降低,相变前后电阻－应变保持线性关系．对于初始组织含有Ｒ相组织的ＮｉＴｉ丝,在拉伸过程中,电阻的变化规律较为复杂,取决于初始组织中各相的比例和温度．在卸载阶段,当没有相变过程发生时,电阻－应变之间呈线性关系;当有相变过程发生时,电阻－应变曲线的斜率会发生改变．     

Weibull分布和极值分布场合下简单步进应力加速寿命试验的最优设计

产品的加速寿命试验被用来较快地获得关于产品寿命分布的信息.本文研究了Weibull分布和极小值分布下简单步加试验的最优设计问题.为解决Nelson折算法对极小值分布的数据处理产生特殊情况的问题,作者应用近年来一些新的研究成果,将位置-尺度分布中的尺度参数设为随应力变化的量进行最优设计.给出一实例,并将其推广到更一般的形式.     

THE TYPE OF A CLASS OF VILENKIN CONVOLUTION OPERATORS

在满足第二个数公理的零紧Ａｂｅｌ群Ｇ的空间Ｌ（Ｇ）中研究了一类Ｖｉｌｅｎｋｉｎ卷积算子的性质．该类算子包括Ｖｉｌｅｎｋｉｎ－Ｆｏｕｒｉｅｒ级数的部份和、Ｆｅｊｅｒ平均等作为特例．文中证明了这类算子是弱（１,１）型和强（ｑ,ｑ）型的,１＜ｑ＜∞．     

纳米级二氧化硅玻璃粉的制备及其特性

采用正硅酸乙脂为前驱物,用溶胶－凝胶法制备纳米级二氧化硅（ＳｉＯ２）粉,分别用Ｘ射线衍射仪、透射电子显微镜、红外光谱仪、差热扫描量热分析仪和白度测试仪对凝胶粉随温度变化的特征进行了分析测试．结果表明干凝胶在１２００℃热处理１ｈ仍是无定型的ＳｉＯ２粉,其粒度大小为４０ｎｍ左右,白度为９２．１％．