滨海盐渍型水稻土最适有机质含量的研究

滨海盐渍型水稻土是辽宁省主要农业土壤之一。主要分布在辽河下游的渤海沿岸,以营口、盘锦地区为主要代表,是我省主要粮食生产基地之一,因此,对滨海盐渍型高产水稻土最适有机质含量的研究,不论在理论上还是在生产上都有十分重要的意义。因此我们于2004、2005连续二年对盘锦鼎翔集团的盐渍型水稻土进行研究,高产田土壤最适有机质含量为2.0～3.0%,中低产田为0.4～2.12%,平均为1.36%。增加土壤有机质的积累,调节土壤有机质的转化,是培肥土壤的基本措施,是农业生产的重要任务。要维持和提高土壤有机质的水平,必须有预见性的施用各种有机物料。     

射频溅射金属前驱体硫化法制备的Cu2ZnSnS4薄膜

采用射频溅射技术沉积Cu／Sn／Zn金属前驱体叠层结合硫化技术在玻璃衬底上成功制备了Cu2ZnSnS4薄膜。X-射线衍射分析表明，通过优化制备条件可以获得单一黝锡矿结构且具有（221）择优取向的Cu2ZnSnS4薄膜。霍尔效应和紫外可见透过谱测量表明，样品的薄膜电阻、吸收系数和光学带隙分别达到0．073Ω·cm，10^4cm^-1和1．53eV，具有适合作为薄膜太阳电池吸收层应用的可能性。     

The concentration quenching characteristics of ~5D_3-~7F_J and ~5D_4-~7F_J (J=0―6) transitions of Tb~(3 ) in YBO_3:Tb~(3 ) phosphor

The photoluminescence quenching behaviors of 5D3-7FJ and 5D4-7FJ (J = 0―6) transitions of Tb3 in YBO3:Tb under 130―290 nm excitation were systematically investigated. The results revealed that the quenching concentrations of both 5D3-7FJ and 5D4-7FJ transitions of Tb3 in YBO3:Tb were mainly de-pendent on excitation wavelength. Particularly,the quenching concentrations of 5D4-7FJ transitions of Tb3 under 130―290 nm excitation were correlated with excitation bands of YBO3:Tb. The quenching concentrations of 5D3-7FJ transitions remained at low concentration (2%) under 186―290 nm excitation and then increased gradually with energy of incoming excitation photon when excited at 130―186 nm. This dependence should be involved in their excitation mechanisms and quenching pathway in particular excitation region.     

基于ASP.NET的毕业设计选题系统构建

介绍了ASP.NET技术,并对基于ASP.NET技术开发的B/S结构毕业设计选题系统的功能进行了详释。     

步进电机细分技术在经济型数控机床中的应用

本文叙述了步进电机细分原理及微机控制系统，并将其应用于经济型数控铣床的横向进给伺服系统，有效提高了开环数控系统的定位精度。     

新指示反应催化光度法测定痕量铁的研究

研究了在溴化十六烷基吡啶存在下，以邻菲啉为活化剂，铁催化抗坏血酸还原对羟基苯基重氮氨基偶氯苯的褪色反应及其动力学条件，探讨了反应机理，建立了高选择性测定痕量铁的新方法．本法检出限为９５×１０－１１ｇ／ｍｌ．线性范围为０－１０μｇ／２５ｍｌ．用于发样、食品样中痕量铁的测定，结果满意．     

W_(18)Cr_4V钢真空油淬白亮层、熔化层形成原因的试验研究

W_(18)Cr_4V钢真空加热油淬后,表面出现白亮层和熔化层等异常现象。本文利用金相显微镜,显微硬度计、扫描电子显微镜和电子探针等手段对白亮层和熔化层进行了分析研究。试验表明,白亮层、熔化层均是真空油淬增碳的结果。本文对白亮层、溶化层形成原因进行了比较深入的分析探讨提出了产生白亮层必须同时具备的三个条件。     

Study on End Milling Generation Surface Model and Simulation in View of Main Axle s Tolerance

In accordance with the relative movement between end-milling cutter and workpiece surface, a theoretical generation model for milled surface was established with the movement error of principal axle considered. Then the milled surfaces under various cutting condition were simulated, the results of which showed that end milled surfaces were of “vaulted profile“, heights of surface irregularty at various points to be different with maximum value in the middle and smaller at both sides, the difference were ...