一种壳聚糖免疫缓释微球的制备方法

采用了先交联法制备可溶胀的壳聚糖载体微球，后将模型高分子抗原以被动吸附方式担载在溶胀的微球内的两步法制备缓释高分子免疫微球，避免了高分子抗原接触有机试剂引起的活性损失。     

对咪唑与Ag（Ⅲ）表面相互作用的理论探讨

用量子化学半经验CNDO方法研究了咪唑与Ag(III）表面的相互作用，咪唑与银表面吸附的最终结果应为表面单分子层而不是表面配位聚合物，最后得出咪唑在Ag(III)表面上发生的主要是桥式吸附。     

Ag+CuO/ZrO2催化剂的制备与表征1.载体制备方法的研究

用XRD、BET和TPR等手段表征了浸溃法制备的Ag CuO／ZrO2催化剂,研究了载体的制备方法对催化性能的影响、结果表明加入表面活性剂回流后的样品,比表面积和孔隙度明显提高,有助于改善催化剂的活性．     

Flexible organic light-emitting diodes with ITO／Ag／ITO multi-layers as anodes

The transparent ITO/Ag/ITO multi-layers are developed as anodes on flexible PET (poly(ethylene terephthalate)) substrates. The influence of these anodes on FOLED (Flexible Organic Light-emitting Diodes) is investigated. From the results of research, it can be seen that the multi-layer anode has optimum characteristics, whose sheetresistance is 11 Ω and optical transmittance is about 80%,when the thickness of Ag sandwiched by two ITO layers is in the range of 14--18 nm. It is demonstrated that the OLED devices with multi-layer anodes give better luminescence and higher efficiency compared with those with single ITO anodes.     

阶跃过渡应答法研究甲醇完全氧化反应动力学──反应机理及动力学参数的求取

在第一部分基础上，进一步研究了甲醇完全氧化反应过程中某些物种的行为，证实了甲醇在ＰｄＡｇ／Ａｌ２Ｏ３催化剂上的吸附是该反应的慢步骤，并提出了反应机理，用ＲｕｎｇｅＫｕｔａ法和修正的ＧａｕｓＮｅｗｔｏｎ法求取了各基元步骤的速率常数、活化能和指前因子等动力学参数。     

合金元素对Fe─P非晶志合金电镀层性能的影响

用正交试验法研究了在电镀Fe－P非晶态合金的电解液中分别加入钼酸钠和钨酸钠以制取Fe－Mo－P和Fe－W－P非晶态合金的镀液配方和工艺条件。获得了外观呈银白色、平整光滑的非晶态镀层。比较了镀层硬度和在某些介质中的耐蚀性。     

Low melting point nanocrystalline Sn–Ag solder synthesized by a refined chemical reduction method

The commercial market of Sn-Pb solder is gradually decreasing due to its toxicity, calling for Pb-free substitute materials. Sn-Ag alloy is a potential candidate in terms of good mechanical property. The major problematic issue of using Sn-Ag is their high melting temperature, consequently this study is dedicated to lowering the melt- ing temperature of Sn3.5Ag （wt%） alloy by developing nanomaterials using a chemical reduction approach. The resultant nanocrystalline Sn3.5Ag is characterized by field emission scanning electron microscope. The size dependence of the melting temperature is discussed based on differential scanning calorimetry results. We have reduced the melting temperature to 209.8 ℃ in the nanocrystalline Sn3.5Ag of （32.4± 8.0） nm, compared to ～221 ℃ of the bulk alloy. The results are consistent with the prediction made by a relevant theoretical model, and it is possible to further lower the melting temperature using the chemical reduction approach developed by this study.     

Ag在Si表面吸附的第一性原理研究

采用基于密度泛函理论的第一性原理平面波赝势方法计算优化了Ag原子在硅惯习面Si(111)和Si（220）晶面的最佳吸附位置,并计算了Ag/Si(111)和Ag/Si(220)体系的表面吸附能和表面态电子结构．研究表明：Si基表面Ag原子的最稳定吸附居于Si(220)晶面的穴位,此时的吸附能最低,其值为5.2569eV,属于强化学吸附;同时由于在Ag/Si(220)体系中,Ag-4d轨道和表面态Si-3s、3p轨道电子的强相互作用,以及Ag-4p轨道的电子云强偏向于Si-3s、3p轨道使得体系的能隙宽度变窄,导电性急剧增大．     

载银活性炭/过氧化氢对焦化废水的催化氧化作用

用载银活性炭与过氧化氢处理焦化厂废水，在pH值为3左右，反应时间5h的条件下，废水中的有机物被催化氧化，其CODcr值可由2351．3mg．L^-1降到300mg．L^-1以下，去除率达87．67％以上。