Fuzzy controller design for networked control system with time-variant delays

1.INTRODUCTIONAs a system becomes more and more intelligent andflexible,the systemrequires more sensors,actuators,and controllers,which are often referred to as fielddevices.In most cases,these field devices requiresome type of electrical connection because they aredistributed over a certain area.Conventionally thesedevices are connected with point-to-point connec-tions,whichis not suitable any more for modern in-dustrial control systems,because the number of cableis proportional tothe squ…     

Feedforward and feedback optimal control for linear time-varying systems with persistent disturbances

1 .INTRODUCTIONIn nature ,there are various external disturbancesaffecting the performances of systems . Many con-trol problemsinvolve designing a controller capableof stabilizing a given linear system while mini mi-zing the worst-case response to some additive dis-turbances . This problemis relevant to disturbancerejection and cancellation. One application area ofinterest is flight control through wind shear ,where disturbances arise from a modal for windshear based on harmonic oscillati…     

OUTPUT FEEDBACK CONTROL FOR MIMO NONLINEAR SYSTEMS WITH EXOGENOUS SIGNALS

The paper addresses the global output tracking of a class of multi-input multi-output （MIMO） nonlinear systems affected by disturbances, which are generated by a known exosystem. An adaptive controller is designed based on the proposed observer and the backstepping approach to asymptotically track arbitrary reference signal and to guarantee the boundedness of all the signals in the closed loop system. Finally, the numerical simulation results illustrate the effectiveness of the ProPosed scheme.     

Using the Viable Systems Model to Structure a System Dynamics Mapping and Modeling Project for the Australian Taxation Office

This paper is a case study of a major System Dynamics (SD) intervention in policy design in the Australian Taxation Office. The project, which lasted two years, tested a number of hypotheses regarding the application of Stafford Beer's Viable Systems Model (VSM) to the structure and process of the project. The paper reports that the success of the VSM within the ATO was qualified by political changes in the external environment.     

非线性电液伺服系统的稳定性研究

分析了典型的采用线性状态反馈的电液伺服控制系统的稳定性;理论研究和仿真结果表明稳定的系统由于一些系统状态变量的影响,系统的稳定性存在渐近稳定性的可能.     

典型模糊PID控制器的插值算法及参数优化

推导出了输入采用正规模糊集、三角形、全交迭的隶属度函数;推理输出采用PID形式的典型模糊PID控制器的插值解析表达式,揭示了其本质特征,为实际应用提供了一种快速精确的控制算法。基于该插值解析表达式,研究了利用遗传算法对这一类模糊控制器进行参数优化的方法。最后通过仿真实例验证了本文方法的有效性。     

基于四元数的导弹反步控制及全方位算法应用

针对传统四元数适应范围小,分析误差困难问题,基于误差四元数的概念深入研究了姿态误差形式和姿态角和四元数全方位转换问题,提出了姿态角和四元数的全方位转换算法。该算法实现了姿态角和四元数的-1800到1800全空间转换,并且具有抗扰动的能力,同时将四元数与非线性反步(backstepping)方法结合,进行了导弹姿态控制。仿真表明了全角度算法的正确性,以及基于文中的四元数姿态误差方程可有效进行导弹全方位姿态控制。     

带有持续扰动非线性系统的最优跟踪控制

研究具有外界持续扰动的非线性系统的无静差最优跟踪控制问题。首先基于内模原理构造一扰动补偿器,将系统化为无扰动的增广系统。然后利用灵敏度法推导出了该系统的最优跟踪控制律。仿真实例表明了该设计方法的有效性。     

直接自适应模糊算法参数的选取以及仿真分析

针对Wang提出的直接自适应模糊控制器，首次推导出了自适应律参数γ以及仿真步长h的理论取值范围。以一阶不稳定系统、二阶达芬振荡系统为例，给出了当γ以及h取不同值时的仿真结果，通过对结果的分析，验证了前面推导出的参数取值范围的正确，并得出有关参数γ变化对系统性能影响的规律。     

基于单周期控制的分离式三相PFC系统仿真

提出了一种新型分离式三相PFC(功率因数校正)系统结构,并应用单周期控制技术实现了三相整流器的单位功率因数。该方法不需乘法器,简化了系统,并且分离式的结构满足了用户的不同需求。使用matlab的simulink仿真工具建立了该系统的仿真模型,仿真实验结果验证了该系统的有效性。