基于改进YOLOv5的遥感图像飞机目标检测

针对遥感图像中飞机检测尺寸大小不一、背景复杂导致的难以识别问题,提出一种基于YOLOv5网络模型的改进方法。首先,在YOLOv5网络模型中融入Swin-Transformer模块,使网络全局建模并使全维度信息交互,以提升网络的特征提取能力;其次,对损失函数进行优化,引入SIOU损失函数以考虑真实框和预测框之间的向量角度问题。对比实验表明,优化前后网络模型检测精度均为95.3%。在检测精度相同的情况下,改进后的网络模型召回率为91.2%,比改进前提升0.6个百分点;改进后平均检测精度mAP_0.5为95.7%,比改进前提升0.2个百分点。结果表明,改进后的YOLOv5网络模型能在一定程度上提升遥感图像中飞机目标检测性能。     

HQ70钢疲劳强度统计特性研究

在对HQ70钢疲劳寿命统计特性研究的基础上,利用疲劳寿命分布与疲劳强度分布函数间的转换关系,对HQ70钢疲劳强度分布特性进行研究,并作出疲劳寿命强度概率分布的P-s-N三维空间曲面.确认疲劳强度分布并非通常假设的正态分布,而是偏态分布,其特征函数的概率分布为标准正态分布.     

含铝高速钢中奥氏体非均匀长大的机制

M2AI和M2高速钢经一次和二次淬火后,奥氏体晶粒和未溶碳化物的定量研究表明,在高温r/f比值相同的条件下,由于淬火前原始组织的差别,可发生正常(均匀)和异常(非均匀)两类长大。根据异常粗晶形成初期的组织观察,提出了“连续-非连续”再结晶模式和“合并—推移”式的生长机制。提出了减轻或消除M2AI钢混晶的工艺原则。     

Metabolism of 3β-hydroxycholest-5-en-26-oic acid in hamsters

Summary Metabolism of 26-hydroxycholesterol to 3-hydroxychol-5-en-24-oic acid and other C24-bile acids has been expected to occur by way of 3-hydroxycholest-5-en-26-oic acid in studies in vitro. 3-Hydroxycholest-5-en-26-oic acid was infused intravenously into bile fistula hamsters and the following C24-bile acids were identified: 3-hydroxychol-5-en-24-oic acid, lithocholic acid, chenodeoxycholic acid, and a small amount of cholic acid.     

Bovine microvascular endothelial cells of separate morphology differ in growth and response to the action of interferon-γ

Five cell types recently isolated from the bovine corpus luteum differed in their epithelioid morphology and their cytoskeleton, but shared common criteria of microvascular endothelial cells^1,2. To give strong evidence for the separate entity, the growth rate of the 5 phenotypically different cells was studied. They were seeded at low density on day 0. Most of these cells were treated with 200 to 1000 U recombinant bovine interferon- (IFN-) for 3 days. The untreated remainder served as controls. Cell counts were made for all cultures on days 4, 7, 10 and 13. morphology: 13 d after treatment with IFN- senescent cells as well as intact cells occurred in cultures of cell types 1 to 4. Cultures of cell type 5 were apparently unchanged and resembled their untreated counterparts. Desminpositive cells in cultures of cell type 2 developed cell processes. Growth rate: In the absence of IFN-, the growth rate was high for cell types 3 and 4, moderate for cell type 1, and low for cell types 2 and 5. The presence of IFN- caused anti-proliferative effects. These were higher for cell types 3 and 4 than for cell types 1 and 2. IFN- could be cytotoxic on cell type 3. In contrast, the cytokine tended to support the cell growth of cell type 5. These findings substantiate the postulate that endothelial cells exhibiting separate morphology in culture also function differently.     

消除电磁搅拌连铸坯中“白亮带”的试验研究

针对电磁搅拌连铸坯中的“白亮带”问题进行试验研究和理论分析．结果表明：铸坯凝固过程中电磁搅拌引起的钢液运动特点是能否产生“白亮带”的关键．特殊的电磁搅拌方式有效地抑制“白亮带”的产生．     

钼对低合金钢硝酸盐体系应力腐蚀的影响

以高风温热风炉用钢的沿晶应力腐蚀开裂问题为背景,研究了Ｍｏ对低合金钢在硝酸盐溶液中的应力腐蚀行为。结果表明,低合金钢中加入合金元素将使钢中贝氏体和／或珠光体含量增大,从而提高了材料的稳定性和抗ＳＣＣ耐蚀性。提出了低合金钢／硝酸盐溶液体系的“温度－钼含量－ＳＣＣ图”。     

含双二苯基膦戊烷铜(Ⅰ)配合物的合成与性质

室温,氮气氛下,铜（Ⅱ）盐和双二苯基膦戊烷（ｄｐｐｐ５）在溶液中通过还原取代反应合成了８种铜（Ⅰ）配合物（１．［Ｃｕ（ｄｐｐｐ５）］２（ＢＦ４）２,２．［Ｃｕ２（ｄｐｐｐ５）２（Ｃ８Ｈ３Ｏ２ＳＦ３）２］,３．［Ｃｕ２（ｄｐｐｐ５）３］（ＣＣｌ３ＣＯＯ）２,４．［ＣｕＢｒ（ｄｐｐｐ５）］２,５．［Ｃｕ２（ｄｐｐｐ５）Ｃｌ２］,６．［Ｃｕ２（ｄｐｐｐ５）３］（ＣＨ３ＣＯＯ）２,７．［Ｃｕ（ｄｐｐｐ５）（ＮＯ３）］,８．［Ｃｕ２（ｄｐｐｐ５）３］（ＣｌＯ４）２）。通过元素分析、红外光谱、热重、摩尔电导测定对其进行表征,表明这是一种行之有效的有机膦配合物的合成方法。     

K 16Mn连铸坯热装炉轧制对轧材组织性能影舷

采用高温固溶加热法,在φ300轧机上模拟现场连铸坯热装炉轧制工艺,分别考察了K16Mn钢不同热装温度和开轧温度对轧材组织性能的影响.结果表明,热装轧制和常规冷装轧制屈服、抗拉强度相当,热装轧制成品塑性、韧性均较好.热装轧制工艺对K16Mn钢组织的影响,随着热装温度的提高,轧前奥氏体晶粒变得粗大,并且轧后组织混晶程度提高.这可通过提高开轧温度,首道次采用大压下量促使铸坯发生完全再结晶来消除.从而细化晶粒.改善成品组织性能.     

新型钢管砼框架节点试验研究及其应用

给出了钢管混凝土框架节点的试验结果,并采用有限元法对新型节点模式进行了应力场分析。介绍了该新型节点的设计方案及在实际工程中的应用。