大运高速公路立体绿化模式探讨

论述了大运高速公路立体绿化的原则,探讨了大运高速公路立体绿化模式。     

The concentration quenching characteristics of ~5D_3-~7F_J and ~5D_4-~7F_J (J=0―6) transitions of Tb~(3 ) in YBO_3:Tb~(3 ) phosphor

The photoluminescence quenching behaviors of 5D3-7FJ and 5D4-7FJ (J = 0―6) transitions of Tb3 in YBO3:Tb under 130―290 nm excitation were systematically investigated. The results revealed that the quenching concentrations of both 5D3-7FJ and 5D4-7FJ transitions of Tb3 in YBO3:Tb were mainly de-pendent on excitation wavelength. Particularly,the quenching concentrations of 5D4-7FJ transitions of Tb3 under 130―290 nm excitation were correlated with excitation bands of YBO3:Tb. The quenching concentrations of 5D3-7FJ transitions remained at low concentration (2%) under 186―290 nm excitation and then increased gradually with energy of incoming excitation photon when excited at 130―186 nm. This dependence should be involved in their excitation mechanisms and quenching pathway in particular excitation region.     

约翰·麦考文的孤立波研究及其对KdV(1895)的重要影响

通过对原始文献和研究文献的分析,考察了约翰.麦考文1891年关于孤立波的工作.他总结了此前孤立波研究的成果和不足,摒弃了经典的浅水波展开方法,创造性地采用正切函数的奇数阶展开,得到了优于前人的结果.约翰.麦考文的这项工作是进一步研究的很好出发点,更是德弗雷斯博士论文选题的重要诱因,因此在19世纪孤立波理论发展中起着承上启下的重要作用.     

灰色系统的分离建模方法

首先给出了平移算子和数据序列函数的定义 ,并在平移算子和数据序列函数的基础上提出了一种灰色系统的分离建模方法 .以全国电视机产量的预测为例 ,证明分离建模方法能够提高建模的精度 .这说明分离建模方法是很有意义的.     

Li3Sn的电子和几何结构:第一原理计算

CuSn化合物在近来的锂电池负极材料研究中引起了相当的重视.使用基于混合基表示的第一原理赝势法,研究了Li插入CuSn完全替代了Cu而且占满所有间隙位置后形成的Li3Sn的电子与几何结构性质.给出了其"结构～能量"关系图,电子能带结构,电子态密度以及电荷密度分布等.     

su(1,1)代数的无限维Schwinger实现

运用su(1,1)代数的无限维Bose和Fermi算符实现,得到对称和反对称无限维矩阵的行列式.     

W_(18)Cr_4V钢真空油淬白亮层、熔化层形成原因的试验研究

W_(18)Cr_4V钢真空加热油淬后,表面出现白亮层和熔化层等异常现象。本文利用金相显微镜,显微硬度计、扫描电子显微镜和电子探针等手段对白亮层和熔化层进行了分析研究。试验表明,白亮层、熔化层均是真空油淬增碳的结果。本文对白亮层、溶化层形成原因进行了比较深入的分析探讨提出了产生白亮层必须同时具备的三个条件。     

流动注射化学发光增强法测定酪氨酸

在Na2CO3-NaHCO3介质中,酪氨酸对Luminol-K3Fe(CN)6化学发光体系有很强的增敏作用.据此建立了流动注射化学发光增强法测定酪氨酸的方法.发光信号的增强值(ΔI)与酪氨酸的浓度在5.0×10-5～4.0×10-7mol/L的范围内呈良好的线性关系,检出限为1×10-7mol/L(S/N=3),对于1.0×10-6mol/L的酪氨酸测定相对标准偏差为2.4%(N=11).该法用于测定医用氨基酸注射液中的酪氨酸,结果令人满意.     

分数Hamilton圈与分数树形图

定义有向图的分数有向Hamilton圈和分数支撑树形图，讨论分数Hamilton圈、分数旅行售货员问题和分数支撑树形图基于线性规划的等价定义及多项式时间算法。     

Preparation and properties of the SmOx/Rh(100) model surface

The preparation of SmOx/Rh(100) and CO adsorption on this model surface have been investigated with Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption spectroscopy (TDS). The oxygen adsorption on the SmRh alloy surface leads to the aggregation of Sm on the surface. The thermal treatment of this oxidized surface induces the further agglomeration of SmOx on the Rh(100) surface. Compared with CO TDS on the clean Rh(100) surface, three additional CO desorption peaks can be observed at 176, 331 and 600 K on the SmOx/Rh(100) surface. The CO desorption peak at 176 K may originate from CO adsorbed on SmOx islands, while the appearance of the CO adsorption peaks at 331 and 600 K, depending on the oxidation state of Sm, is attributed to CO species located at the interface of SmOx/Rh(100).