CF_3I气体灭火系统在某油库中的应用探讨

CF_3I气体灭火系统集成了火灾探测和气体自动灭火等功能,可24小时检测并迅速扑灭由于雷电等因素引起的外浮顶储罐密封圈的早期火灾,降低了大面积火灾发生的可能性。基于中东地区某项目外浮顶原油储罐的应用情况,详细介绍了CF_3I气体灭火系统的布置及操作原理,分析了CF_3I气体灭火系统与传统泡沫灭火系统的关系,并提出了CF_3I气体灭火系统在设计中需注意的问题。     

102例晚期肿瘤患者应用优质护理理念效果分析

目的探讨优质护理理念对晚期肿瘤患者的服务效果.方法选择102例晚期肿瘤患者,随机分为观察组和对照组,每组各51例.观察组应用优质护理理念,优化、完善日常护理服务及相关措施;对照组采用常规护理模式,比较两组患者疼痛感受、生活质量、护理满意度等情况.结果观察组疼痛感受评分低于对照组,生活质量及护理满意度均优于对照组,差异具有统计学意义(P0.05).结论优质护理理念可以改变、优化当前针对晚期肿瘤患者的日常护理服务,确保相关护理服务措施可以贴合患者现实的疾病状态,解决患者日常的疾病问题和心理问题.     

3D建模与快速成型技术在个体化膝关节假体术中的应用

目的探讨3D建模与快速成型技术在个体化膝关节肿瘤假体手术治疗中的新方法,评价3D建模与快速成型技术的应用价值.方法选取3例膝关节骨肿瘤患者,术前均对膝关节周围病损区行CT扫描,获得原始数据后,导入Mimics19.0软件,在软件中模拟手术规划,并且设计与切除后剩余的骨组织相契合的钛合金"植物.随访期间应用国际骨与软组织肿瘤保肢(Musculoskeletal Tumor Society,MSTS)功能评分系统对患者的术后功能情况进行评价.结果 3例患者均获随访,随访时间5~26个月,平均16个月.末次随访MSTS得分为18~29分,平均24.3分,其中优2例,良1例,优良率达100%.结论通过3D建模与快速成型技术在膝关节肿瘤手术中的应用,可精确指导截骨界限,设计个体化膝关节假体,韧带附丽点接近生理结构,为膝关节骨肿瘤治疗提供新方法.     

基于贝叶斯理论的多模型结构识别的试验研究

基于贝叶斯理论的抽样方法,对结构的多模型结构识别问题进行试验研究.采用基于贝叶斯理论的多模型结构识别的概念与基本框架,以及马尔科夫链-蒙特卡洛模拟(MCMC),建立了有限元模型库.针对MCMC在参数维度较高时不易收敛和计算效率低下等问题,提出了一种改进的MCMC抽样方法来进行多模型结构识别.利用Matlab-Strand7的交互访问技术(API)能够进行大型结构有限元模型的参数自动修正,在获得校验后的有限元模型库后,能基于有限元模型的后验概率分布进行预测.为了验证该理论的可行性和有效性,针对一根简支梁的数值算例和一座实际大跨钢管混凝土桁架系杆拱桥进行了基于贝叶斯理论的结构识别研究与响应评估,并使用传统的单模型结构识别方法——遗传算法(GA)进行对比分析,结果表明本文提出的基于贝叶斯理论的多模型结构识别方法能够更好地进行结构响应预测.     

顶吹搅拌液相流体的水模实验与数值模拟分析

采用水模型和VOF数学模型对浸没式气体顶吹搅拌液相流体分别进行实验与数值模拟,分析在不同喷吹条件下气泡在液相中的形变、运动及液相流体的流场特性。结果表明,随着气流量和喷管浸入液面深度的增加,气-液混合区域分布范围逐渐扩大,液面波动更剧烈;气流量越大、喷管浸入液面越深、液相温度越高,气泡运动对液相流体内部的搅拌作用越强,流体内部扰动越剧烈,液相流场域中的流场速度越大,其中,当气流量为2.0m3/h、喷管浸入液面深度为340mm时,其液相流场速度最大值达到1.18m/s。     

La掺杂对SrTiO_3纳米颗粒光催化性能的影响

采用高温固相反应法,向SrTiO_3中掺杂不同含量La制备光催化剂,通过XRD、SEM、UV-Vis等手段对其结构和形貌进行表征,并以罗丹明B(RhB)为模拟污染物,研究掺杂不同含量La所制催化剂对RhB的光催化降解能力的影响,从而评价所制催化剂的光催化性能。结果表明,随着掺La含量的增加,所制催化剂的晶体结构从SrTiO_3的立方晶系逐步向La_2Ti_2O_3的单斜晶系转变;La掺杂使得所制催化剂的禁带宽度减小、对紫外光的吸收阈值增大,使其光催化性能得到显著提升;掺La含量越高,所制催化剂的光催化性能越好。     

中间相沥青基介孔炭的表征及其用作锂离子电池负极材料的电化学性能

以中间相沥青为碳源、CaCO_3为模板,制备中间相沥青基介孔炭(MPMC)。采用XRD、SEM、TEM等手段表征所制介孔炭的结构和形貌,并将其用作锂离子电池的负极材料,测试电化学性能。结果表明,所制MPMC具有丰富的介孔结构和较大的比表面积及孔体积,随着CaCO_3质量分数的增加,MPMC的比表面积和孔体积先增加后减小,当CaCO_3的质量分数为70%时,所制MPMC的比表面积和孔体积最大;MPMC用作锂离子电池负极材料具有良好的电化学性能,能有效提高锂离子电池的可逆比容量,具有良好的循环稳定性和倍率性能。     

Microstructure and corrosion behavior of Al<Subscript>3</Subscript>Ti/ADC12 composite modified with Sr

In this study, we investigated the effect of the addition of Sr (0wt%, 0.1wt%, 0.2wt%, and 0.3wt%) on the microstructure and corrosion behavior of Al₃Ti/ADC12 composite by optical microscopy, X-ray diffraction, scanning electron microscopy, and energy diffraction spectroscopy. The results reveal that the α-Al phases were nearly spherical and 40 μm in size and that the eutectic Si phases became round in the composite when the Sr content reached 0.2wt%. The Al₃Ti particles were distributed uniformly at the grain boundary. The results of the corrosion examination reveal that the Al₃Ti/ADC12 composite exhibited a minimum corrosion rate of 0.081 g·m–2·h–1 for an Sr content of 0.2wt%, which is two thirds of that of unmodified composite (0.134 g·m–2·h–1). This improved corrosion resistance was due to galvanic corrosion, which resulted from the low area ratio of the cathode to anode regions. This caused a low-density corrosion current in the composite, thereby yielding optimum corrosion resistance.     

Electrochemical behavior of gold and its associated minerals in alkaline thiourea solutions

Electrochemical measurements were conducted to study the electrochemical behavior of gold (Au) and its commonly associated minerals in alkaline thiourea solutions. The results indicated that without addition of any stabilizer, selective dissolution of Au from stibnite and pyrite was only possible at relatively low thiourea concentrations. As Na₂SiO₃ was added, pyrite started to become active and an oxidation peak appeared; the oxidation peaks of arsenopyrite and chalcocite appeared earlier than that of Au. The chalcocite peak shifted in the positive direction and the peak current increased. Stibnite did not show an oxidation peak and its current was nearly zero. Adding Na₂SiO₃ favored the selective dissolution of Au when its minerals were associated with chalcocite and stibnite. At pH 12, the Au anode dissolution peak current increased with stabilizer concentration. At 0.38 and 0.42 V and for Na₂SiO₃ concentration below 0.09 M, the current density continuously increased with Na₂SiO₃ concentration. The Na₂SiO₃ concentration had to be adequate to stabilize thiourea. When the potential was higher than 0.42 V, the surface of the Au electrode started to passivate. With an additional increase in potential, the presence of Na₂SiO₃ could not stop the inevitable decomposition of thiourea.     

一维螺旋链状配位聚合物[Zn(pam)(bpa)]n的水热合成及晶体结构

通过水热反应,合成了标题化合物[Zn(pam)(bpa)]_n(1),(pam=4,4'-亚甲基二(3-羟基-2-萘甲酸), bpa=2,2'-二吡啶胺),对该化合物通过X-射线单晶衍射、红外和荧光光谱进行了结构表征。X-射线单晶衍射表明,目标化合物中的锌(II)离子分别与来自两个不同4,4'-亚甲基二(3-羟基-2-萘甲酸)中的羧基氧和同一个2,2'-二吡啶胺中的两个氮原子配位形成四配位的扭曲四面体结构。该配合物通过锌(II)离子的连接形成有趣的一维螺旋长链,链与链之间通过氢键作用形成二维片状结构。