网络路由收敛性能测试研究

在网络建设和运行中,采用测试的方法对其性能进行评估对于网络的正常运营具有重要的意义.本文研究了网络路由收敛性能测试方法,为得到路由收敛性能指标,对OSPF和iBGP的路由收敛时间进行了测量.提出了一种简化的路由收敛时间测量方法,通过测量数据平面的传输性能指标,对路由控制平面的收敛时间进行估算.该方法对于测试设备要求不高,实施简单方便.采用该方法在CERNET2投入运营之前对其进行了路由性能测试,实验结果表明CERNET2在路由变化时具有较好的路由收敛性能.     

The controlling factors and distribution prediction of H2S formation in marine carbonate gas reservoir, China

Generally, there are some anhydrites in carbonate reservoir, as H2S is also familiar in carbonate oil and gas reservoirs. Nowadays, natural gas with high H2S concentration is usually considered as TSR origin, so there is close relationship between H2S and anhydrite. On the contrary, some carbonate rocks with anhydrite do not contain H2S. Recently, researches show that H2S is only a necessary condition of H2S formation. The reservoir porosity, sulfate ion content within formation water, reservoir temperature, oil/gas and water interface, hydrocarbon and some elements of reservoir rock have great controlling effects on the TSR occurrence. TSR deoxidizes hydrocarbon into the acidic gas such as H2S and CO2, and the H2S formation is controlled by TSR occurrence, so the relationship among reaction room, the contact chance of sulfate ion and hydrocarbon, the reservoir temperature has great influence on the TSR reaction. H2S has relatively active chemical quality, so it is still controlled by the content of heavy metal ion. Good conditions of TSR reaction and H2S preservation are the prerequisite of H2S distribu- tion prediction. This paper builds a predictive model based on the characteristic of natural gas reservoir with high H2S-bearing. In the porosity reservoir with anhydrite, the formation water is rich in sulfate and poor in heavy metal ion. Oil and gas fill and accumulate in the gas reservoir with good preservation conditions, and they suffered high temperature later, which indicates the profitable area of natural gas with high H2S-bearing.     

基于图书馆2．0环境下的馆员素质和技能要求探析

阐述了图书馆2．0的内涵，分别对一线馆员、咨询馆员、学科馆员应具备的服务素质和技能进行了探讨。     

提高TiO_2光催化性能的研究进展

综述了近年来纳米TiO2光催化剂研究现状,光催化机理,及其改良的最新技术,包括对其的表征及表面改性,以提高纳米TiO2的光催化效率。     

合金铸铁激光处理的探讨——Ⅱ.激光辐照工艺参数的控制

用热传导方程控制激光辐照温度,建立了一种新回归方程以控制激光辐照硬化深度,选用卡尔丹公式列热传导方程及同归方程联立求解,可得到同时满足一定的硬化深度及表面最高温度双重要求的工艺参数,此种方法可作为激光硬化处理工艺参数的控制或预报,对本合金铸铁的激光硬化处理,其表面温度的下限应大于其熔点温度,即以表面产生微熔的快速冷凝处理为宜,并以选取低功率慢扫描为最佳。     

核磁共振跟踪反应法研究5—O—乙酰基—2.3-双脱氧-D.L-呋喃戊糖基氯的合成

以乙酸四氢呋喃甲酯为原料,通过自由基氯化反应,合成双脱氧核苷类抗艾滋病药物的重要中间体化合物5—0—乙酰基—2.3—双脱氧—D.L—吹喃戊糖基氯.对于此种不稳定的中间体化合物,用~1HNMR跟踪监测反应物的方法,研究了改变反应时间、反应温度和反应物摩尔比对反应产物的影响,获得了最佳的反应条件,使其收率从10％提高到50％左右.     

边界拟合坐标系中的流动方程

本文提出了流体力学解析边界拟合坐标系方法，及建立在这种坐标系基础上对流动方程进行摄动处理的方法，并列举几种流动建立了解析边界拟合坐标系中的方程。     

ZnWo4：Cr^3＋的吸收光谱研究

本文通过对ZnWo4:Cr^3 晶体的光学吸收谱的观测资料^[1]的分析，假定Cr^3 杂质的有效晶场的八面体结构的变形后的D4晶场。采用Oh点群表象准对角型简化强场方案，导出了d^3-D4强场能量矩阵。首次计算了ZnWo4:Cr^3 的自旋允许谱精细结构。理论计算结果与实验吻合较好。