网络环境下组合体交互式3D动画的设计

工程制图组合体网络教学系统的特点是三维实体造型多,动画数据量大,交互性强,对网络带宽要求高,开发该系统的关键和难点在于实现组合体三维动画的网络快速传输和实时交互.介绍了建立组合网络3D模型、动画及交互式操作,以及如何提高三维模型网络传输速度的实现方法.实验表明,基于Java 3D的组合体动画具有网络响应速度快、交互性强、文件占用空间小的优点,对于开发组合体网络教学系统十分适用.     

框架技术与设计模式在网上购物系统中的应用

框架技术和设计模式是设计可复用面向对象软件的基础,是对在特定场景下解决一般设计问题的类和相互通信的对象的描述,两者的组合应用在实际的软件设计中能够发挥更大的威力.目前大多数网上购物系统是基于两层体系结构来进行设计开发,存在效率低下、可维护性差等问题,为改善这种状况,从网上购物系统的需求出发,通过引入框架技术与设计模式,构建了一个具有较强的可重用性和可扩展性的系统.     

铸造多晶硅的吸杂

吸杂是减少多晶硅中有害金属杂质的一种有效手段.比较了在800℃、900℃和1 000℃条件下经2 h的磷吸杂、铝吸杂和磷铝共吸杂处理后的多晶硅少子寿命、电性能差异.实验结果表明,磷铝共吸杂少子寿命的增加比仅用磷、铝单独吸杂都明显,但3种吸杂方式对太阳电池电性能都没太大影响;同时发现退火到700℃的热处理并不能有效地改善磷吸杂效果.     

Pr3+∶Y2SiO5晶体中橙—蓝频率上转换过程

测量了Pr³⁺∶Y₂SiO₅晶体的吸收谱, 标定了室温下Pr³⁺在Y₂SiO₅晶体4f²组态内的能级. 利用579 nm激光激发Pr³⁺∶Y₂SiO₅晶体, 观察到480~515 nm上转换荧光带. 运用时间分辨激光光谱技术测量了³P₀能级的上转换荧光衰减曲线. 通过研究上转换荧光的衰减曲线、 吸收谱、 激发谱和上转换荧光强度与泵浦激光单脉冲能量的关系, 确定了以¹D₂为中间态的能量转移上转换主要是上转换机制.      

水环境中石油烃类的TiO2光催化降解量子产率的测定

把反应速率常数和量子产率作为动力学常数,研究了石油烃类化合物的TiO2光催化氧化降解.并采用高光密度法,以K3Fe(C2O4)3做光露计,300 W中压汞灯为光源,在365 nm波长处测定石油烃类的反应速率常数和量子产率.结果表明:正十六烷、正癸烯和萘等石油烃类在365 nm波长下的TiO2光催化氧化降解反应均服从一级反应动力学,其反应速率常数分别为4.3×10-3、6.7×10-3和5.1×10-3m in-1.K3Fe(C2O4)3光解服从零级反应,其速率常数为5×10-5(mol/L)-1.m in-1;正十六烷、正癸烯和萘的量子产率分别为1.20、1.87和1.42,其值均大于1,进而表明了TiO2光催化氧化法对石油烃类化合物的降解反应可能有活性氧参与.     

Bi2Ti2O7薄膜的制备及在栅场效应管中的应用

采用化学溶液沉积法，用价格低廉的原料成功地制备了Bi₂Ti₂O₇介质膜.制膜过程简单，成本低廉，得到的薄膜具有良好的绝缘性和较高的介电常数.用其制备的绝缘栅场效应管与相同尺寸的SiO₂绝缘栅场效应管相比，前者具有较高的跨导和较低的开启电压.     

铝对大蒜根尖细胞有丝分裂的影响

用不同浓度的三氯化铝分别处理大蒜根尖6h,18h,24h,结果表明:各处理组均对大蒜根尖细胞有丝分裂产生抑制。随着处理液中铝浓度的升高及处理时间的加长,有丝分裂指数呈现规律性的变化:染毒的根尖细胞有丝分裂指数明显低于对照组,并随着作用时间的延长快速下降,随着浓度的升高先减后增再减,说明三氯化铝具有细胞分裂抑制剂的作用。不同浓度的三氯化铝在不同处理时间内均能诱使大蒜根尖细胞发生染色体畸变。     

Reconstruction of Temperature Field in 3-D, Absorbing, Emitting, and Anisotropically Scattering Medium

IntroductionRecently ,theinvestigation on numerical radiative heattransfer has been focused onthe reconstruction of temperatureprofile in target space according to its boundary heat fluxgained by detectors[1 8], whichis a kind of inverse problemofradiation. Among these investigation, Li HY[1 4]hasresearched on one-di mension or two-di mension rectangular ,spherical or cylindrical medium which is absorbing ,emitting , and isotropically scattering ; Liu LH[5,6]hasresearched on the semitranspar…     

Preparation and Characterization of Organic/Inorganic Hybrid Nanofibers

A new class of nanocomposites based on organic and inorganic species integrated at a nanoscale has obtained more attention these years. Organic-inorganic hybrids have both the advantages of organic materials, such as light weight, flexibility and good moldability, and inorganic materials, such as high strength, heat stability and chemical resistance. In this work, PVAc/TiO2 organicinorganic hybrid was prepared by sol-gel process. Eiectrospinning technique was used to fabricate PVAc/TiO2 hybrid nanofibers. The structures and properties of the hybrid nanofibers were characterized by Scanning Electron Microscopy （SEM）, Atomic Force Microscope （AFM）, Differential Scanning Calorimeter （DSC） and Fouriertransform infrared （FTIR） spectra. SEM and AFM were employed to study the topography of the hybrid nanofibers. The chemical structure of the hybrid nanofibers were examined by FTIR. The DSC scans revealed the second order transition temperature of the hybrid materials were higher than PVAc.     

Digital 3D Modeling of Whole Garment Based on Structure Illumination

IntroductionAs the development of production and design of wholegar ment in the infor mation age ,the digitalization of wholegar ment becomes more and more i mportant and necessaryin the field of textile . The digitalization of whole gar mentprovides the convenience and the advantage for the designand the production of whole gar ment .The digitalization of whole gar ment emphasizes on the3D model of it . Digital3D modelingis referred as a processof the recovery of three-di mensional model fro…