甲基异柳磷气相色谱定量法

甲基异柳磷原油用气相色谱法测定,其色谱条件如下:不锈钢柱1m×3mm、柱内填充物为5%OV-3涂于ChromosorbW-HP60—80目担体,以氮气作载气,柱温190℃,用氢火焰检测器,癸二酸二正丁酯作内标,测定误差<±1.2%.     

Isolation and identification of a novel STR (D17S2204) in the vicinity of NF1 locus

Using a synthetic oligonucleotide (dA-dC)15 as a probe to screen a probe pool made by microdissected human chromosome band 17q11-q12, a DNA fragment containing (CA)16 was isolated, which is a novel short tandem repeat (STR) determined by searching in the GenBank and GDB. It has 8 allelic types with a PIC value of 0.61. The novel STR is conformed with Mendelian segregation according to the linkage analysis of a three-generation neurofibromatosis type Ⅰ (NF1) pedigree. The STR was localized at chromosome band 17q11-q12 in the vicinity of NF1 gene by FISH analysis. The accession number of the STR in GenBank and GDB is G32112 and D17S2204 respectively.     

一种单晶高温合金中g?相的析出行为

研究了固溶冷却速度和时效时间对一种镍基单晶高温合金中γ′相的析出的影响。合金经1 250℃固溶处理4 h,从炉中快速取出,分别进行空冷、油冷和水冷,以考察冷却速度对γ′相析出的影响。随后对固溶处理后试样进行时效处理,以考察时效时间和固溶冷却速度对γ′相长大的影响。结果表明,合金在固溶处理后,γ′相尺寸随固溶冷却速率的升高而下降。在时效处理时,γ′相尺寸的增大率随固溶冷却速度的增大而减小;随着时效时间的增加,γ′相的尺寸增加。     

关于(mg+m-1,mf-m+1)-图的(g,f)-因子

讨论(mg m-1,mf-m 1)-图的(g,f)-因子问题,推广了图的因子理论问题,改进了文[2]的一些结论,有助于进一步研究(mg m-1,mf-m 1)-图的(g,f)-因子问题。     

新型核酸荧光探针的合成及光谱性质

设计合成了新型荧光探针1,3-二羧戊基-7,8-二甲基苯并蝶啶,结构经过IR,1HNMR予以证实,并研究了它的紫外光谱和荧光光谱性质以及LC与小牛胸腺ctDNA的作用模式。     

交联大分子的透射电镜分析

用含有不同羟值的聚乙烯醇缩要下醛与4,4′-二苯甲烷二异氰酸组成的交联聚合体系,通过分子内反应和分子间反应之间的竞争,使交联过程得以控制.合成了可溶解的分子内交联大分子.再用透射电镜对其进行观察,电镜照片显示,合成的交联大分子具有特殊结构,并显示了交联大分子的形成过程,首先形成前交联大分子(独立的球型体),然后前交联大分子再继续反应,形成分子内交联大分子.     

纳米Ca2B6O11的制备及摩擦学性能

采用中和沉淀法合成了球型、粒径分布均匀的纳米硼酸钙润滑油添加剂,利用XRD、SEM对其结构组成和表面形貌进行了表征。将添加剂样品均匀分散在润滑油中得到成品油,静置观察考查了润滑油的分散性和稳定性。利用重负荷车辆与工业齿轮油中试验检验了润滑油的的润滑性能。结果表明,纳米硼酸钙添加剂具有良好的分散性、稳定性和抗磨减摩性能。     

Weights and robustness of model-based seasonal adjustment

Model-based seasonal adjustment implicitly defines a set of weights at the ends of series as well as in the middle. Until now, with the exception of very simple models, the weights have been obtained numerically. In this paper we give the analytical expressions for the weights for both the structural and the ARIMA framework for a model which contains trend, seasonal and irregular component. In the final part of the paper we address the question of robustness of model-based seasonal adjustment. We analyse practically, using real time series, and theoretically, through the analysis of the shape of the weights, how the fitting of different specifications for the non-seasonal part affects the extraction of the seasonal component. © 1998 John Wiley & Sons, Ltd.     

挤压锻温度对固态再生H11钢组织和性能的影响

以回收的H11钢车削屑获得的粉末为原料, 利用粉末压坯和挤压锻工艺制备样品, 并结合拉伸实验、硬度测试、XRD,SEM,TEM等分析手段, 研究了1100~1220℃不同挤压锻温度对固态再生H11钢组织结构和力学性能的影响. 结果表明:样品固结效果良好;挤压锻温度为1220℃时, 材料密度可达95.8 %;挤压锻温度达到1140℃后,基体中析出Fe₇C₃相; 随着挤压锻温度从1100℃升高至1220℃, 沿挤压方向的硬度从2.5GPa增加至4.4GPa, 抗拉强度从451MPa增加至808MPa, 但延伸率从3.1 %降低至0.7 %.     

强g(x)-J#-clean环

引入了强g(x)-J^#-clean环的概念, 得到了强g(x)-J^#-clean环的若干性质,并借助于强g(x)-J^#-clean环给出了强J^#-clean环的刻画。