螺旋滚筒选煤机滚圈强度设计方法的研究

介绍了螺旋滚筒选煤机的基本结构和滚圈的作用 ,分析了滚圈的受力 ,建立了力学模型 ,利用求解静不定问题的方法算出特殊截面的内力 ,进而算出滚圈的最大弯矩和截面尺 ,为滚圈设计提供了一种理论方法     

一维螺旋配合物{[AgL](ClO4)(H2O)}n的合成和晶体结构

二硫醚配体2,3-二苯硫甲基喹喔啉与高氯酸银反应合成出配合物{[AgL](ClO4)(H2O)}n.用X射线衍射方法测定了配合物的晶体结构.配合物为四方晶系,空间群为I4(1)/a,晶体学参数:a=2.375 5(2)nm,b=2.375 5(2)nm,c=2.369 5(4)nm,V=13.371(2)nm3,Z=16.晶体结构研究表明配合物为一维螺旋结构.     

滚齿机上粗切蜗杆螺旋齿面的工艺措施

为了解决传统的车床车削大模数多头蜗杆效率低的问题,提出了在滚齿机上粗切蜗杆螺旋齿面的加工方法,提高了加工效率。给出了滚齿机调整参数的计算方法和指形铣刀的设计方法,并对蜗杆精车方法提出了可借鉴的措施。     

螺旋CT三维重建及多平面成像对胸腰段脊柱爆裂骨折的诊断价值探讨

目的：探讨螺旋CT三维重建（CT3D）及多平面重建（MPR）对胸腰段脊柱爆裂骨折诊断的优缺点及临床应用价值。方法分析53例胸腰段脊柱爆裂骨折病例。分别行X线平片，CT及螺旋CT三维重建、多平面重建检查及技术处理。结果：CT对椎体中后柱骨折的显示有明显优越性，而三维重建及多平面重建不仅能具体、直观、形象显示骨折情况，而且对脊髓、神经根损伤的显示价值清楚。结论平片诊断爆裂骨折需与单纯压缩骨折鉴别，明确诊断需CT证实，螺旋CT3D和MPR对诊断及了解椎管内损伤有很好的应用价值。     

Plasma sheet stretching accompanied by field aligned energetic ion fluxes observed by the NUADU instrument aboard TC-2

The NUADU (NeUtral Atom Detector Unit) instrument aboard TC-2 recorded 4л solid angle images of charged particles (E >180 keV) spiraling around the magnetic field lines in the near-Earth plasma sheet (at ~ -7 RE, equatorial dawn-to-night side) during a geomagnetic storm (Dst =-219 nT) on August 24, 2005. Energetic ion beam events characterized by symmetrical, ring-like, solid angle distributions around ambient magnetic field lines were observed during a 34-minute traversal of the plasma sheet by the TC-2 spacecraft. Also, observations during these multiple crossings of the plasma sheet were monitored by the magnetometer experiment (FGM) aboard the same spacecraft. During each crossing, a whistler-mode chorus enhancement was observed in the anisotropic area by the TC-2 low frequency electromagnetic wave detector (LFEW/TC-2) at a frequency just above that of the local lower hybrid wave. A comparison of the ion pitch angle distribution (PAD) map with the ambient magnetic field shows that an enhancement in the field aligned energetic ion flux was accompanied by tailward stretching of the magnetic field lines in the plasma sheet. In contrast, the perpendicular ion-flux enhancement was accompanied by a signature indicating the corresponding shrinkage of the magnetic field lines in the plasma sheet. Since both parallel ion-flux and perpendicular ion-flux enhancements occurred intermittently, the data were interpreted to imply a dynamical, oscillatory process of the magnetic field line (stretching and shrinking) in the near-Earth plasma sheet, which might have acted to help establish an interaction region in this area which would support continuous aurora-substorm triggering during the ongoing magnetic storm. The whistler-mode chorus may have been produced due to ion gyro-resonance during particle pitch angle diffusion after the plasma sheet compression.     

螺旋CT三维重建及多平面成像对胸腰段脊柱爆裂骨折的诊断价值探讨

目的探讨螺旋CT三维重建(CT3D)及多平面重建(MPR)对胸腰段脊柱爆裂骨折诊断的优缺点及临床应用价值。方法分析53例胸腰段脊柱爆裂骨折病例。分别行X线平片,CT及螺旋CT三维重建、多平面重建检查及技术处理。结果CT对椎体中后柱骨折的显示有明显优越性,而三维重建及多平面重建不仅能具体、直观、形象显示骨折情况,而且对脊髓、神经根损伤的显示价值清楚。结论平片诊断爆裂骨折需与单纯压缩骨折鉴别,明确诊断需CT证实,螺旋CT3D和MPR对诊断及了解椎管内损伤有很好的应用价值。     

有关与轴线成定角的螺旋铣刀刃口设计问题

指出了对于球面螺旋铣刀、带角圆的螺旋铣刀不宜采用与轴线成定解的定义来设计螺旋刃口，并给出了其数学上严格证明和直观分析，为同类研究提供了借鉴。     

基于螺旋理论的机构弹性的几何分解

介绍一种对模拟机器人弹性的６×６刚度和柔顺矩阵进行对角化的几何分解方法．采用螺旋理论，从三个正交的外载螺旋柔顺轴和三个正交的变形螺旋柔顺轴推导得一个相似变换，对角元素是线性及旋转柔顺和刚度的静态值．这与应力、应变及转动惯量的主轴和主值类似，证明了对非奇异及奇异情况，分解总是存在的，并给出了分解表达式．     

螺旋叶片成形胎具的一种设计方法

运用解析几何方法，从等螺距旋面和螺旋线的参数方程入手，采用坐标系旋转等方面得出螺旋面的有关特性，并根据这些特性提出一种螺旋叶片水平形成胎具的设计方法，使一胎具即可压制多种导程的螺旋叶片。