纤维堆囊菌发酵产生埃博霉素条件的优化

埃博霉素是纤维堆囊菌产生的一种具有抗肿瘤活性的次级代谢产物．文中研究了纤维堆囊菌DSM11999发酵合成埃博霉素的条件．结果表明：采用对数生长期后期的菌种在25℃进行发酵，将马铃薯淀粉和胰蛋白胨分别作为碳源和氮源，添加少量的无机盐MnCl4，EDTA—Fe—Na，K2HPO4，ZnCl2，CuSO4和生长促进因子丙氨酸，可使埃博霉素的产量提高22．5％．     

聚砜中空纤维膜乙炔脱湿的研究

采用渗透侧抽真空的方式对膜法乙炔脱湿进行了系统的研究.考察了不同处理量下,渗透侧真空度对渗余气含水量、回收率、分离因子和水蒸气、乙炔渗透通量的影响.当处理量为2.4 mL/s,原料气压力为180 kPa,渗透侧压力为20 kPa时,经过膜分离器处理后的乙炔水含量可由1%降至0.4%以下,渗透气量小于5%,便于循环利用.     

生态型木纤维吸油材料的制备与研究

以杉木为原料,经蒸煮、纤维帚化疏解、热解处理制备出生态型木纤维吸油材料.研究了吸油材料的吸油性能及其与热处理温度、抽出物的关系等问题.结果表明,经过350℃热处理试样的吸油量最大、吸水量最小,吸油量与吸水量比值高达77.5,是原料用蒸煮纤维的10倍以上.蒸煮纤维在200~500℃热处理时,试样的热水抽出物与1%NaOH抽出物含量随热解温度升高而减少,苯醇抽出物含量则在200~250℃时减少,300℃时增大,400℃后急剧减少.研究表明,纤维表面的亲油性物质对吸油能力有重要影响.     

一种改进的阈值分割算法在复合材料图像处理中的应用

针对纤维增强复合材料微观结构图像的特点,提出了一种改进的基于模糊思想的阈值分割算法,该算法利用整体阈值、局部阈值和像点梯度信息之间的关系,构造了一个双输入单输出的模糊逻辑系统,合理计算出像点的最佳分割阈值.实验结果证明了算法的有效性.     

Effects of Some Additives on the Adhesion of Polyacrylamide Sizes to Fibers

IntroductionPolyacrylamide ( PAM) size is one of the sizeingredients that are commonly used in conventionalfor mulations for warp sizing and paper making .It has theproperties of adhering to fibers and can be capable ofholding fiber together by surface attachment . Comparedwith starches and polyvinyl alcohols , PAM possesses suchcapability as excellent adhesion to cellulose fibers . Thiscapability ,however ,is not due to chemical valence ;but isdeveloped only through hydrogen bonds and Van …     

Research on Flax Fiber Reinforced Polylactide Environmental Friendly Composite

Biodegradable polylactide acid （PLA） resin can be combined with flax fibers to produce biodegradable composite materials. In our study, commercial PLA fibers were mixed with flax fibers by a non-woven method so as to make non- woven pre-forms, which can be generated into flax fiber reinforced PLA environmental friendly composites by heat pressing technology. The tensile, flexural and impact properties are tested in order to evaluate the basic physical properties of the composites, and the influenced factors listed as making technology of the pre-forms, weight ratio of flax fibers and heat pressing technology are discussed and optimized, which can be described as weight ratio of flax fibers and PLA fibers is 50/50, heating temperature, time and pressure are respectively 195℃, 20 rain and 12.5 Mpa. Preliminary results show that mechanical properties of the flax/PLA composites are quite promising compared with flax/PP composites in coclrnon commercial automotive use. Scanning electron microscope （SEM） is used to analyze the tensile specimen fracture surfaces, which shows voids and gaps occurring between flax fibers and PLA matrix and sign of fiber pull.out, the strength of flax/PLA interface can be further improved.     

Liquid Flow in Shaped Fiber Bundle

By computation and comparison of the critical spreading coefficient parameter, it was found that shaped fiber bundle is better for wetting. Liquid-air interface tension of liquid arising the shaped fiber bundle body is considered as one critical factor besides liquid viscosity, inertia force and liquid-fiber interface tension. Experimental result simulation demonstrated that the liquid-air interface tension is correlated with the geometric size of the liquid arising in body, Φ0 （x） and which is affected by the cross sectional shape of fiber and the radius of single fiber. The shaped fiber bundle model is/ntroduced to/nvestigate liquid flow in fiber assembly. The model is generated based on a random function for stochastic forming of fibers in bundle and it is necessary to combine this fundamental model with physical explanation for investigation of liquid flow in fiber assembly.     

特定环境下FRP与混凝土正拉黏结性能试验研究

通过纤维增强塑料(FRP)与混凝土试件的正拉黏结强度试验来研究碳化、冻融循环、盐溶液干湿循环下FRP与混凝土之间的黏结耐久性.碳化、干湿循环作用后,CFRP与GFRP试件的正拉黏结强度有一定提高,表明这两种复合材料体系可以用来加固碳化、盐溶液干湿循环作用地区的混凝土结构.冻融循环作用达到一定循环次数后,正拉黏结强度随着冻融循环次数增加逐渐降低,这与冻融降低了混凝土强度有关,冻融循环对复合材料与混凝土的黏结界面也有不利影响,因此这两种复合材料体系用于加固承受冻融作用的混凝土结构时,需要考虑耐久性问题.     

医用纺织品的实际应用

介绍了医用纺织品的分类、医用纺织品所使用的新材料及其性能,并指出其替代旧材料的优越性。     

纳米SiO2-Al2O3聚酰亚胺杂化薄膜的制备及表征

采用溶胶凝胶法制备了二氧化硅及三氧化二铝溶胶,将其掺入聚酰胺酸基体中,得到SiO2-Al2O3聚酰亚胺杂化薄膜,对膜的结构性能进行了研究和表征.结果表明,薄膜材料中SiO2和Al2O3粒子分散均匀,与有机相存在键合,材料热分解温度有所提高.