自然数同次幂级数求和的方法

本文利用微积分方法，推导出自然数同政幂级数的求和公式。     

利用积分算子方程的小波－矩量法分析频率选择反射面

小波－矩量法以小波基作为矩量法中的基函数，通过Ｇａｌｅｒｋｉｎ法可以获得很稀疏的阻抗矩阵，用迭代法求解时可减少计算机内存和计算时间。该文以有限尺寸的频率选择反射面为例，用小波－矩量法分析散射特性和电流分布，着重讨论了阻抗矩阵的稀疏化程度对计算精度的影响。结果表明，当非零元素仅为１０％时，仍能达到满意的精度，因此小波－矩量法不失为分析电大尺寸问题的一种有效方法     

Study on Approach for Computer-Aided Design and Machining of General Cylindrical Cam Using Relative Velocity and Inverse Kinematics

Cylindrical Cam Mechanism which is one of the best eq uipments to accomplish an accurate motion transmission is widely used in the fie lds of industries, such as machine tool exchangers, textile machinery and automa tic transfer equipments. This paper proposes a new approach for the shape design and manufacturing of the cylindrical cam. The design approach uses the relative velocity concept and the manufacturing approach uses the inverse kinematics concept. For the shape desig n, the contact points betw...     

Modeling of Agile Manufacturing Execution Systems with an Agent-based Approach

Agile manufacturing execution systems (AMES) are used to help manufacturers optimize shop floor production in an agile way. And the modeling of AMES is the key issue of realizing AMES. This paper presents an agent-based approach to AMES modeling. Firstly, the characteristics of AMES and its requirements on modeling are discussed. Secondly, a comparative analysis of modeling methods is carried out, and AMES modeling using an agent-based approach is put forward. Agent-based modeling method not only inherit ...     

Surface Modification Process by Electrical Discharge Machining with Ti Powder Green Compact Electrode

This paper describes a new method of surface modification by Electrical Discharge Machining (EDM). By using ordinary EDM machine tool and kerosene fluid, a hard ceramic layer can be created on the workpiece surface with Ti or other compressed powder electrode in a certain condition. This new revolutionary method is called Electrical Discharge Coating (EDC). The process of EDC begins with electrode wear during EDM,then a kind of hard carbide is created through the thermal and chemical reaction between the wo...     

对时域有限差分(FDTD)法误差的分析

时域有限差分（ＦＤＴＤ）法已经在许多领域得到了应用，但对该方法的误差分析还停留在简单模型的数值解与其严格解进行比较的基础上，本文从理论上对ＦＤＴＤ法误差的来源进行了研究，并提出几种减小误差的办法。     

HPMBP与N_（503）协同萃取钯（Ⅱ）的研究

研究了ＨＰＭＢＰ与Ｎ５０３的氯仿溶液从硝酸介质中协萃钯（Ⅱ）的性能．用斜率法和等摩尔系列法确定萃合物组成为（ＣＨ３ＣＯＮＨＲ２）Ｐｄ（ＰＭＢＰ）３；求得该协萃反应的平衡常数及协萃配合物的生成常数分别为：ｌｇｋ１２＝１．５４，ｌｇβ１２＝２．３９．考察了温度对协萃平衡的影响，测定了协萃反应的热力学函数．     

论经济发展中的制度分析

制度是经济活动中较重要的因素，畅通的制度安排对经济发展有推动作用。本文从国家之间贫富悬殊的原因入手，分析制度因素对经济发展的作用，论证了国家经济发展过程中合理的制度安排的必要性。     

超微粒子－有机聚合物薄膜的研究

我们用离子团束－飞行时间质谱（ＩＣＢ－ＴｏＦＭＳ）系统制备了金（Ａｕ）超微粒子－聚乙烯（ＰＥ）薄膜和Ｃ＿（６０）－聚乙烯薄膜。用透射电子显微镜（ＴＥＭ）分析了所制备的样品。它们的结构是Ａｕ超徽粒子镶嵌在多晶的ＰＥ薄膜中，其中Ａｕ原子团呈球形，直径分布在２．０－５．０ｎｍ窄范围内，当沉积基底温度为９０℃时，Ａｕ原子团相互靠近，几乎连接起来，但仍保持原来大小。基底温度为１４０℃蒸积的Ｃ＿（６０）－ｐＥ薄膜具有晶态结构，其晶格常数为１．４５４ｎｍ。