聚砜中空纤维膜乙炔脱湿的研究

采用渗透侧抽真空的方式对膜法乙炔脱湿进行了系统的研究.考察了不同处理量下,渗透侧真空度对渗余气含水量、回收率、分离因子和水蒸气、乙炔渗透通量的影响.当处理量为2.4 mL/s,原料气压力为180 kPa,渗透侧压力为20 kPa时,经过膜分离器处理后的乙炔水含量可由1%降至0.4%以下,渗透气量小于5%,便于循环利用.     

生态型木纤维吸油材料的制备与研究

以杉木为原料,经蒸煮、纤维帚化疏解、热解处理制备出生态型木纤维吸油材料.研究了吸油材料的吸油性能及其与热处理温度、抽出物的关系等问题.结果表明,经过350℃热处理试样的吸油量最大、吸水量最小,吸油量与吸水量比值高达77.5,是原料用蒸煮纤维的10倍以上.蒸煮纤维在200~500℃热处理时,试样的热水抽出物与1%NaOH抽出物含量随热解温度升高而减少,苯醇抽出物含量则在200~250℃时减少,300℃时增大,400℃后急剧减少.研究表明,纤维表面的亲油性物质对吸油能力有重要影响.     

投影带变换对长度变形的影响

文章对晋城矿区由矿区独立坐标系改用部定3°带平面坐标系后引起的边长影响进行了分析和计算,提出了应采取的对策及相关注意事项。     

一种改进的阈值分割算法在复合材料图像处理中的应用

针对纤维增强复合材料微观结构图像的特点,提出了一种改进的基于模糊思想的阈值分割算法,该算法利用整体阈值、局部阈值和像点梯度信息之间的关系,构造了一个双输入单输出的模糊逻辑系统,合理计算出像点的最佳分割阈值.实验结果证明了算法的有效性.     

Effects of Some Additives on the Adhesion of Polyacrylamide Sizes to Fibers

IntroductionPolyacrylamide ( PAM) size is one of the sizeingredients that are commonly used in conventionalfor mulations for warp sizing and paper making .It has theproperties of adhering to fibers and can be capable ofholding fiber together by surface attachment . Comparedwith starches and polyvinyl alcohols , PAM possesses suchcapability as excellent adhesion to cellulose fibers . Thiscapability ,however ,is not due to chemical valence ;but isdeveloped only through hydrogen bonds and Van …     

Research on Flax Fiber Reinforced Polylactide Environmental Friendly Composite

Biodegradable polylactide acid （PLA） resin can be combined with flax fibers to produce biodegradable composite materials. In our study, commercial PLA fibers were mixed with flax fibers by a non-woven method so as to make non- woven pre-forms, which can be generated into flax fiber reinforced PLA environmental friendly composites by heat pressing technology. The tensile, flexural and impact properties are tested in order to evaluate the basic physical properties of the composites, and the influenced factors listed as making technology of the pre-forms, weight ratio of flax fibers and heat pressing technology are discussed and optimized, which can be described as weight ratio of flax fibers and PLA fibers is 50/50, heating temperature, time and pressure are respectively 195℃, 20 rain and 12.5 Mpa. Preliminary results show that mechanical properties of the flax/PLA composites are quite promising compared with flax/PP composites in coclrnon commercial automotive use. Scanning electron microscope （SEM） is used to analyze the tensile specimen fracture surfaces, which shows voids and gaps occurring between flax fibers and PLA matrix and sign of fiber pull.out, the strength of flax/PLA interface can be further improved.     

Liquid Flow in Shaped Fiber Bundle

By computation and comparison of the critical spreading coefficient parameter, it was found that shaped fiber bundle is better for wetting. Liquid-air interface tension of liquid arising the shaped fiber bundle body is considered as one critical factor besides liquid viscosity, inertia force and liquid-fiber interface tension. Experimental result simulation demonstrated that the liquid-air interface tension is correlated with the geometric size of the liquid arising in body, Φ0 （x） and which is affected by the cross sectional shape of fiber and the radius of single fiber. The shaped fiber bundle model is/ntroduced to/nvestigate liquid flow in fiber assembly. The model is generated based on a random function for stochastic forming of fibers in bundle and it is necessary to combine this fundamental model with physical explanation for investigation of liquid flow in fiber assembly.     

医用纺织品的实际应用

介绍了医用纺织品的分类、医用纺织品所使用的新材料及其性能,并指出其替代旧材料的优越性。     

膜振动理论在纤维材料吸声性能研究中的应用

膜振动理论作为经典声学理论的基础已得到广泛的研究.作者在研究中发现,将膜振动理论的某些结论与毛细管吸声理论结合后,建立的薄纤维层(如织物、无纺布等)吸声理论方程不仅与实验结果吻合较好,而且可以较好的解释薄纤维层在作为护面材料或紧贴墙壁时吸声系数等于或接近于零,而作为窗帘或背后有空腔时却具有较好的吸声效果的这一长期未能解释的声学现象.     

新型药物释放材料褐藻酸盐纤维的制备研究

利用湿法纺丝钙离子交联的方法制备褐藻酸盐纤维,并将牛血清清蛋白包埋入纤维中,研究了制备条件对纤维性能的影响.用扫描电镜观察纤维的微观形貌;并测试了纤维的力学性能、溶胀性能;测定了蛋白质的包埋效率,以及蛋白质的释放速率.结果表明,湿法纺丝凝固浴的CaCl2浓度影响纤维的力学性能、溶胀性能及蛋白质的释放.