小核糖核酸病毒科病毒细胞受体研究进展

小核糖核酸病毒是重要的人畜共患病原体,它会导致人和动物出现亚临床感染或从轻度发热到心脏、肝脏和中枢神经系统的严重疾病.近年来,该科病毒的感染机制、受体等逐渐成为学术界研究的热点.文章针对小核糖核酸病毒的分类、病毒受体的研究方法及研究现状作以综述,为今后相关研究提供理论依据.     

3D建模与快速成型技术在个体化膝关节假体术中的应用

目的探讨3D建模与快速成型技术在个体化膝关节肿瘤假体手术治疗中的新方法,评价3D建模与快速成型技术的应用价值.方法选取3例膝关节骨肿瘤患者,术前均对膝关节周围病损区行CT扫描,获得原始数据后,导入Mimics19.0软件,在软件中模拟手术规划,并且设计与切除后剩余的骨组织相契合的钛合金"植物.随访期间应用国际骨与软组织肿瘤保肢(Musculoskeletal Tumor Society,MSTS)功能评分系统对患者的术后功能情况进行评价.结果 3例患者均获随访,随访时间5~26个月,平均16个月.末次随访MSTS得分为18~29分,平均24.3分,其中优2例,良1例,优良率达100%.结论通过3D建模与快速成型技术在膝关节肿瘤手术中的应用,可精确指导截骨界限,设计个体化膝关节假体,韧带附丽点接近生理结构,为膝关节骨肿瘤治疗提供新方法.     

La掺杂对SrTiO_3纳米颗粒光催化性能的影响

采用高温固相反应法,向SrTiO_3中掺杂不同含量La制备光催化剂,通过XRD、SEM、UV-Vis等手段对其结构和形貌进行表征,并以罗丹明B(RhB)为模拟污染物,研究掺杂不同含量La所制催化剂对RhB的光催化降解能力的影响,从而评价所制催化剂的光催化性能。结果表明,随着掺La含量的增加,所制催化剂的晶体结构从SrTiO_3的立方晶系逐步向La_2Ti_2O_3的单斜晶系转变;La掺杂使得所制催化剂的禁带宽度减小、对紫外光的吸收阈值增大,使其光催化性能得到显著提升;掺La含量越高,所制催化剂的光催化性能越好。     

中间相沥青基介孔炭的表征及其用作锂离子电池负极材料的电化学性能

以中间相沥青为碳源、CaCO_3为模板,制备中间相沥青基介孔炭(MPMC)。采用XRD、SEM、TEM等手段表征所制介孔炭的结构和形貌,并将其用作锂离子电池的负极材料,测试电化学性能。结果表明,所制MPMC具有丰富的介孔结构和较大的比表面积及孔体积,随着CaCO_3质量分数的增加,MPMC的比表面积和孔体积先增加后减小,当CaCO_3的质量分数为70%时,所制MPMC的比表面积和孔体积最大;MPMC用作锂离子电池负极材料具有良好的电化学性能,能有效提高锂离子电池的可逆比容量,具有良好的循环稳定性和倍率性能。     

Microstructure and corrosion behavior of Al<Subscript>3</Subscript>Ti/ADC12 composite modified with Sr

In this study, we investigated the effect of the addition of Sr (0wt%, 0.1wt%, 0.2wt%, and 0.3wt%) on the microstructure and corrosion behavior of Al₃Ti/ADC12 composite by optical microscopy, X-ray diffraction, scanning electron microscopy, and energy diffraction spectroscopy. The results reveal that the α-Al phases were nearly spherical and 40 μm in size and that the eutectic Si phases became round in the composite when the Sr content reached 0.2wt%. The Al₃Ti particles were distributed uniformly at the grain boundary. The results of the corrosion examination reveal that the Al₃Ti/ADC12 composite exhibited a minimum corrosion rate of 0.081 g·m–2·h–1 for an Sr content of 0.2wt%, which is two thirds of that of unmodified composite (0.134 g·m–2·h–1). This improved corrosion resistance was due to galvanic corrosion, which resulted from the low area ratio of the cathode to anode regions. This caused a low-density corrosion current in the composite, thereby yielding optimum corrosion resistance.     

Electrochemical behavior of gold and its associated minerals in alkaline thiourea solutions

Electrochemical measurements were conducted to study the electrochemical behavior of gold (Au) and its commonly associated minerals in alkaline thiourea solutions. The results indicated that without addition of any stabilizer, selective dissolution of Au from stibnite and pyrite was only possible at relatively low thiourea concentrations. As Na₂SiO₃ was added, pyrite started to become active and an oxidation peak appeared; the oxidation peaks of arsenopyrite and chalcocite appeared earlier than that of Au. The chalcocite peak shifted in the positive direction and the peak current increased. Stibnite did not show an oxidation peak and its current was nearly zero. Adding Na₂SiO₃ favored the selective dissolution of Au when its minerals were associated with chalcocite and stibnite. At pH 12, the Au anode dissolution peak current increased with stabilizer concentration. At 0.38 and 0.42 V and for Na₂SiO₃ concentration below 0.09 M, the current density continuously increased with Na₂SiO₃ concentration. The Na₂SiO₃ concentration had to be adequate to stabilize thiourea. When the potential was higher than 0.42 V, the surface of the Au electrode started to passivate. With an additional increase in potential, the presence of Na₂SiO₃ could not stop the inevitable decomposition of thiourea.     

一维螺旋链状配位聚合物[Zn(pam)(bpa)]n的水热合成及晶体结构

通过水热反应,合成了标题化合物[Zn(pam)(bpa)]_n(1),(pam=4,4'-亚甲基二(3-羟基-2-萘甲酸), bpa=2,2'-二吡啶胺),对该化合物通过X-射线单晶衍射、红外和荧光光谱进行了结构表征。X-射线单晶衍射表明,目标化合物中的锌(II)离子分别与来自两个不同4,4'-亚甲基二(3-羟基-2-萘甲酸)中的羧基氧和同一个2,2'-二吡啶胺中的两个氮原子配位形成四配位的扭曲四面体结构。该配合物通过锌(II)离子的连接形成有趣的一维螺旋长链,链与链之间通过氢键作用形成二维片状结构。     

微量镍元素添加对铁基非晶/纳米晶磁芯软磁性能的影响

用单辊法制备的宽20 mm,厚25μm的Fe_(73.5)Cu_1Nb_3Si_(13.5)B_9和Fe_(73.5)Ni_(0.3)Cu_1Nb_3Si_(14.2)B_8合金带材,绕制成外径为40 mm,内径为25 mm的环型磁芯,然后将磁芯在不同的温度下进行退火处理,研究了微量Ni元素添加对合金带材的晶化行为以及对横向磁场退火后的非晶/纳米晶磁芯的软磁性能的影响。结果表明:与Fe_(73.5)Cu_1Nb_3Si_(13.5)B_9合金带材相比,添加微量Ni元素的Fe_(73.5)Ni_(0.3)Cu_1Nb_3Si_(14.2)B_8合金带材的一级起始晶化温度Tx1和一级晶化峰温度Tp1降低,其二级起始晶化温度Tx2和二级晶化峰温度Tp2升高,两级起始晶化温度之间的差值ΔTx增大;与横向磁场退火后的Fe_(73.5)Cu_1Nb_3Si_(13.5)B_9非晶/纳米晶磁芯相比,横向磁场退火后的Fe_(73.5)Ni_(0.3)Cu_1Nb_3Si_(14.2)B_8非晶/纳米晶磁芯的起始磁导率μi和饱和磁感应强度Bs减小,矫顽力Hc增大;当测试频率f和最大磁感应强度Bm不变时,有效幅值磁导率μa增大,比总损耗Ps和矫顽力Hc减小;当测试频率f不变时,电感Ls和品质因数Q增大;当励磁电流I不变时,感应电动势E大。     

2507双相不锈钢在SO2污染模拟海水中的腐蚀行为

采用开路电位、电化学阻抗谱(EIS)、Mott-Schottky曲线和浸泡腐蚀实验研究了2507双相不锈钢在含不同浓度(0,0.001和0.01 mol·L-1)NaHSO3模拟海水中的腐蚀行为.研究表明:开路电位随NaHSO3浓度的增加而负移,腐蚀倾向增大;电荷转移电阻Rt随浓度的增加而减小,耐蚀性降低;2507不锈钢的腐蚀形态为局部腐蚀,点蚀程度随浓度升高有所加剧,腐蚀速率随浓度的增加而增大;Mott-Schottky曲线和成膜后电化学阻抗谱测试表明,NaHSO3的加入增加了2507不锈钢表面钝化膜的点缺陷浓度,降低了钝化膜的稳定性,电荷转移阻力减小,腐蚀更容易发生.这可能归因于NaHSO3的加入增加了模拟海水的酸度,并随NaHSO3浓度的增加促进了不锈钢表面钝化膜的破坏.     

柱状节理岩体相似材料力学特性试验研究

通过柱状节理岩体模型试验探究白鹤滩水电站坝区柱状节理岩体各向异性特征.使用了模拟岩体内部节理的新方式——3D打印制作不同倾角六棱柱形节理试件,以树脂为节理打印材料,水泥砂浆为模型材料,通过立方体试件单轴压缩试验考察节理岩体强度随倾角0°~45°变化的各向异性特征.试验结果表明:岩体压缩强度随着节理面延伸方向与竖直方向的夹角的逐渐增大而减小,单轴压缩下柱体破坏模式主要为剪切破坏.