离心流化床干燥器中传热传质的实验研究

在不同操作条件下对离心流化床干燥器中湿物料的干燥过程进行了间歇实验研究，测定了气流入口、出口和床层温度以及物料湿含量时间的变化，分析了表观气速、颗粒直径、床层厚度、床体转速和物料初始湿含量对干燥过程的影响，获得了离心流化床干燥过程中传热和传质准则方程。     

大型舰船甲板变形测量

为测量大型舰船甲板的变形，提出了基于多个IMU数据融合的测量方法．建立了甲板变形测量模型．利用最小二乘估计对甲板的变形进行了分析．结果表明，用该方法可以实时估计未安装IMU战位点处的甲板变形，且能减少变形测量系统所需IMU的数量；变形估计精度与IMU的布置有关，当IMU的布置合理时，估计精度优于0．8arcmin．     

用分组装配法解尺寸链，应合理选用基准制

在利用分组装配法解尺寸链过程中，合理选择孔、轴配合制是非常重要的，虽然从理论上讲基孔制与基轴制是完全等效的，但从加工工艺、经济性能、零件结构、采用标准件等方面考虑，选择不同的配合制情况是不相同的。     

零件设计中形状位置公差的确定

论述了在机械产品设计时,如何合理并正确地确定零件形位公差的项目、基准要素、形位公差的等级及公差值。并叙述了形位公差与尺寸公差的关系,以便于合理的分配和给定尺寸、形状或位置公差。     

Some evidence of drying trend over northern China from 1951 to 2004

The surface wetness index, Palmer drought sererity index and the retrieval of soil moisture over China were calculated using monthly precipitation and monthly mean surface air temperature. Based on the contrast analysis of the variation of the above three indices and precipitation, the dry/wet spatio-temporal pattern of northern China in the last 54 years was revealed, and the evidence of drying trend over northern China was analyzed, especially. The results show the following four facts: (1) The drying trend is the main characteristic of the eastern part of Northwest China and the central part of North China since the 1980s and it was enhanced in the last 15 years mainly due to the precipitation decrease and the temperature increase; (2) During the last 54 years, there was only one dry/wet shift at the interdecadal scale occurring in the eastern part of Northwest China and the central part of North China in the late 1970s, which was related to 1977/1978 global abrupt change, whereas there were three shifts in Northeast China, one was in the mid 1990s and the other two were in 1965 and 1983, respectively; (3) Unlike the variation trend of other subregions of northern China, the western part of Northwest China is currently located in a relatively wetting period, which is weak-ened due to the temperature increase; (4) The extreme drought frequency is obviously increasing in the eastern part of Northwest China, the central part of North China and Northeast China since the 1980s, which is closely related to the precipitation decrease and temperature increase in these subregions.     

木材陶瓷制备多孔SiC的研究

椴木木粉／酚醛树脂复合材料经高温碳化制成木材陶瓷，然后经熔融Si反应性渗入制成了多孔的SiC陶瓷．借助X射线衍射、傅里叶红外吸收光谱和扫描电子显微镜等方法对木材陶瓷和多孔SiC的物相组成、微观结构和基本性质进行了研究，利用阿基米德法和三点弯曲法测定了木材陶瓷和多孔SiC的显气孔率和弯曲强度．结果表明，木材陶瓷是非晶碳材料，含有C—O—C醚键、C—C双键及C—H结构等，多孔SiC是由主晶相β-SiC和少量第二相Si组成的复合材料；多孔SiC遗传了木材陶瓷的多孔结构；木材陶瓷向SiC陶瓷的转变使弯曲强度从12．6MPa提高到73．8MPa，显气孔率从64．1％降至53．2％。     

三用干燥热泵表面式蒸发器模拟计算

研究了三用干燥热泵表面式蒸发器模拟计算过程。须特别注意的是：不同运行状态时蒸发器析湿系数不同；蒸发器最佳翅片表面温度的确定方法及结构计算合理性判定等。     

芝麻种子的合理贮藏

要保证芝麻种子的发芽率和食用品质,必须做到合理贮藏.芝麻种子贮藏的关键是控制水分和温度的变化.芝麻种子贮藏的安全水分一般为7%左右.水分过高时,种子容易发热,引起霉菌寄生和虫蚀.因此,种子入库贮藏前必须做好以下几项工作.     

龙口市城区土地基准地价更新研究

时效性是基准地价的重要特征．龙口市城区土地定级估价工作始于1995年，至今城区环境、基础设施、城市用地布局等已发生了很大变化，为保持基准地价的现势性，对龙口市城区基准地价进行了更新．并与第一次结果相对比。做了补充和完善．     

我校举办第七届太平洋周边地区生物复合材料国际会议

由南京林业大学主办的“第七届太平洋周边地区生物复合材料国际会议”于2004年10月在南京林业大学隆重召开。来自美国、加拿大、日本、澳大利亚、新西兰、法国、德国、马来西亚、印度尼西亚以及国内包括科研院所和企业界的专家学代表100多人参加了此次会议。与会代表就木材、竹材或其他非木材纤维材料的性质和加工特性，胶粘剂和胶合机理，