震区中小跨径桥梁墩柱配筋率取值范围

为研究配筋率对钢筋混凝土桥梁延性抗震性能的影响,并在不同设防烈度对主筋配筋率的合理取值进行细分。以钢筋混凝土桥梁为研究对象,通过拟静力模型试验与有限元数值分析的方法,研究竖向钢筋(主筋)配筋率对桥墩延性的影响,提出典型桥墩的多级性能水平量化指标;并探究在氯离子侵蚀的恶劣环境下,不同配筋率对桥梁抗震性能所带来的影响,从而对氯离子侵蚀环境下的震区中小跨径桥梁墩柱配筋率取值范围提供参考建议。结果表明：考虑氯离子侵蚀作用下的恢复力模型能够较好地反映刚度的退化特性,墩柱的最佳配筋率取值范围为1.11%～2.72%;当加速度为0.3g(g为重力加速度)时,仅从配筋率的角度已无法满足墩柱的损伤指标,建议采用减隔震体系进行抗震设计,如采用延性体系时配筋率不得小于2.64%。研究结果可为中小跨径连续桥梁抗震设计提供参考。     

测长仪器数字化微机化改造中的精度保证

本文介绍了测长仪器数字化微机化改造中的精度保证方法:标尺倾斜调整法和计算机软件补偿法。作者将这些方法应用于万能工具显微镜的改造中,获得了满意的效果。该方法简单有效,而且亦适用于新测长仪器的制造。文中还对测长标尺的制造提出了“标尺刻度间距的公差带应正向单向布置”的指导性意见。     

江西樟树四特酒香味成分的GC／MS分析

通过对四特酒进行化学处理、分类收集组分,采用GC/MS联用技术对各组分进行分离与定性定量测定,分离出130多个色谱峰,鉴定出65个化合物.     

含铝高速钢中奥氏体非均匀长大的机制

M2AI和M2高速钢经一次和二次淬火后,奥氏体晶粒和未溶碳化物的定量研究表明,在高温r/f比值相同的条件下,由于淬火前原始组织的差别,可发生正常(均匀)和异常(非均匀)两类长大。根据异常粗晶形成初期的组织观察,提出了“连续-非连续”再结晶模式和“合并—推移”式的生长机制。提出了减轻或消除M2AI钢混晶的工艺原则。     

Metabolism of 3β-hydroxycholest-5-en-26-oic acid in hamsters

Summary Metabolism of 26-hydroxycholesterol to 3-hydroxychol-5-en-24-oic acid and other C24-bile acids has been expected to occur by way of 3-hydroxycholest-5-en-26-oic acid in studies in vitro. 3-Hydroxycholest-5-en-26-oic acid was infused intravenously into bile fistula hamsters and the following C24-bile acids were identified: 3-hydroxychol-5-en-24-oic acid, lithocholic acid, chenodeoxycholic acid, and a small amount of cholic acid.     

外加电磁场对火焰结构及燃料燃烧特性的影响

燃料在电、磁场作用下的燃烧是一个新的跨学科性质的研究课题.它涉及磁流体发电、空间技术中电磁燃烧技术的应用以及能源与动力工程中能量转换与效率.本文从实验和理论两个方面,扼要地报导了碳氢燃料在外加磁场、电场影响下的火焰结构及其燃烧特性.把近年来我研究小组的主要研究结果汇总发表.     

回流充气法处理中,高量含铁地下水的研究

本文介绍一种深井回流充气工艺,它兼具充氧和除铁综合性能的新型工艺形式,能改善含铁地下水的过滤性能.在此基础上提出了深井回流充气稳定期的概念,建立了深井回流充气系统中氧量的平衡关系.通过正交试验,提出了处理中、高量含铁地下水的推荐工艺流程和工艺参数.采用χ—射线衍射方法测试了井内铁泥和成熟滤料表面滤膜的成分和形态,分析了"充气"和"过滤》两过程中的除铁机理.     

Bovine microvascular endothelial cells of separate morphology differ in growth and response to the action of interferon-γ

Five cell types recently isolated from the bovine corpus luteum differed in their epithelioid morphology and their cytoskeleton, but shared common criteria of microvascular endothelial cells^1,2. To give strong evidence for the separate entity, the growth rate of the 5 phenotypically different cells was studied. They were seeded at low density on day 0. Most of these cells were treated with 200 to 1000 U recombinant bovine interferon- (IFN-) for 3 days. The untreated remainder served as controls. Cell counts were made for all cultures on days 4, 7, 10 and 13. morphology: 13 d after treatment with IFN- senescent cells as well as intact cells occurred in cultures of cell types 1 to 4. Cultures of cell type 5 were apparently unchanged and resembled their untreated counterparts. Desminpositive cells in cultures of cell type 2 developed cell processes. Growth rate: In the absence of IFN-, the growth rate was high for cell types 3 and 4, moderate for cell type 1, and low for cell types 2 and 5. The presence of IFN- caused anti-proliferative effects. These were higher for cell types 3 and 4 than for cell types 1 and 2. IFN- could be cytotoxic on cell type 3. In contrast, the cytokine tended to support the cell growth of cell type 5. These findings substantiate the postulate that endothelial cells exhibiting separate morphology in culture also function differently.     

轧制带材的瓢曲生成路径

通过建立冷轧带材屈曲失稳后的大位移变形模型,计算出复杂模态的瓢曲浪形生成路径,它包含着实际可能出现的各种附加应力和位移约束条件．实验证明这是可行的板形控制目标理论,解决了高技术轧机的板形设定问题．