矿井瓦斯涌出量时间序列的分形特性分析

应用分形论中的R/S分析法对矿井瓦斯涌出时间序列进行分析。计算了时间序列的赫斯特指数、概率分布分形维数和轨迹分维数。讨论了它们在矿井瓦斯涌出预测中的指导意义。计算结果表明正常情况下矿井瓦斯涌出量的变化趋势具有很好的持久相关性，可以用分形论对其作出趋势预测；而发生火灾时，持久相关性不明显。但两种状态下的概率密度分布都满足分形分布；时间序列轨迹都具有明显的分形特性。     

基于VB的GIS开发

GIS是融合计算机图形和数据库于一体的高新技术，它把地理位置和相关属性有机地结合起来，满足城市建设、企业管理对空间信息的要求。研究是以GIS技术在国内不同领域得到广泛应用并取得良好效果作为前提和背景。以VB作为集成开发环境，简述了基于VB的GIS开发的可行性和优越性。着重阐述了基于VB的地理信息系统开发方法。     

在井下温度合成瓦斯水合物的实验

通过实验研究了利用模拟瓦斯气体在井下温度和中高压的条件下合成瓦斯水合物。采用以实验为主，理论分析和计算机模拟相结合的研究方法，目的在于找出压力、温度及表面活性剂对水合物生成过程的影响。在井下温度和中高压的条件下，采用合适的表面活性剂及一定配比成功合成了瓦斯水合物。得出的结论是：表面活性剂在溶液中形成胶束后很大程度上可增加瓦斯气体的溶解度；与压力相比。温度对水合物的影响更重要：在气一液界面先合成的水合物有利于剩余水合物的合成。     

不同衬底生长ZnO薄膜的结构与发光特性研究

采用射频磁控溅射方法分别在蓝宝石(Al2O3)(0001)和硅(100)衬底上制备ZnO薄膜．通过X-光衍射测量与分析表明两者都沿C轴方向生长，在Al2O3衬底上的ZnO薄膜结晶质量优于在Si衬底上的薄膜样品．然而，由原子力显微镜观测发现在Al2O3衬底上的薄膜晶粒呈不规则形状，且有孔洞，致密性较差；而在Si衬底上的ZnO薄膜表面呈较规则的三维晶柱，致密性好．光致发光测量表明，不同衬底上生长的ZnO薄膜表现出明显不同的发光行为．     

基于UML的LCA中产品系统的建模研究

从产品系统本身的内在规律和产品全生命周期的观念研究了生命周期评价(LCA)的对象——产品系统及其特性，建立了产品系统概念模型；利用统一建模语言(UML)建立产品系统的结构模型、功能模型和信息模型，并描述产品系统的建模过程。     

美学在今天何以成为可能——兼论吴炫的《否定主义美学》

否定主义美学观认为,美学不仅要研究美的现成形式(符号),更重要的是探求这些形式(符号)为何美之原因,以信它之所以诞生的动力机制等更重要的深层问题.其代言人吴炫主张,美并不存在于任何现成的、既有的主客观状态中;恰恰相反,它指向一种未来的可能性世界--理想化、创造性、生成性的价值世界.人类与美借此创造性过程而实现回顾契合.换言之,它旨在否定美的现成性、既定性价值,肯定美的不断生成性、未来理想性和人的创造性价值.     

试论秦始皇陵铜车内铜方壶的定名

~~试论秦始皇陵铜车内铜方壶的定名@汪少华$杭州师范学院语言研究所!浙江杭州310012~~~~~~浙江省哲学社会科学规划项目“《考工记》名物考证”(N0 2YY4)     

A TCAM-based Two-dimensional Prefix Packet Classification Algorithm

Packet classification (PC) has become the main method to support the quality of service and security of network application. And two-dimeusioual prefix packet classification (PPC) is the popular one. This paper analyzes the problem of ruler conflict, and then presents a TCAM-based two-dimensional PPC algorithm. This algorithm makes use of the parallelism of TCAM to lookup the longest prefix in one instruction cycle. Then it uses a memory image and associated data structures to eliminate the conflicts between rulers, and performs a fast two-dimeusional PPC. Compared with other algorithms, this algorithm has the least time complexity and less space complexity.     

A Study on the Surface Structures of Viscose-based Activated Carbon Fiber by FT-IR Spectroscopy and XPS

Using viscose fiber (VF) as starting material and common steam as activating agent, formation of oxygen structures in activated carbon fiber is investigated. In the preparation of samples, VF was first heated at temperatures between 450℃ and 900℃ in N_2 artmosphere. Then, in a successive activation stage, the product carbonized at 600℃ was activated in steam at 450-900℃ for 30 min, and at 600℃ for 5-30 min. The other carbonization products were activated at 600 and 900℃ for 30 min respectively. The products activated at 900℃ were then activated at 450℃ for 30 min again. The starting materiah carbonized products and all activation products were examined by FT-IR spectroscopy and some products were examined by X-ray photoelectron spectroscope (XPS). And the yields of the carbonized and activated products were calculated. By analysing these spectra, the amount of oxygen-containing functional groups of the activated products attained under various activation time, various activation temperature and     

Development of Diamond-like Carbon Fibre Wheel

Introduction Diamond likecarbon(DLC)coatingshavebeen increasinglyappliedtomechanicalcomponentsandpartsduetotheirveryattractivemechanical,chemical, physical,electricalandopticalpropertiessuchashighdegreeofhardness,extremelylowfrictionalcoefficient, highwear resistance,highthermalconductivity,highmodulus,chemicalinertnessandlowdeposition temperature[1].AsshowninFig.1,DLCismadeofcarbon andhydrogenanditsstructureisamorphousorquasi amorphous,whereasdiamondandgraphitearemadeof carbonbuttheirstru…