Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

凋亡抑制蛋白与肿瘤关系的研究

凋亡抑制蛋白(inhibitor of apoptosis proteins,IAPs)可以作为癌症诊断和治疗的靶点,在肿瘤研究方面备受关注,就凋亡抑制蛋白的结构、功能、在肿瘤中的表达与肿瘤的关系等研究进展作一综述,为凋亡抑制蛋白的研究提供信息和思路.     

建筑物地基处理的设计与施工探讨

以具体工程为例，介绍了建筑物地基处理的设计、施工中遵循的原则，施工中遇到特殊情况时采取的处理方法和必要的检测方法，对几种桩基的设计要求、施工工艺及过程、质量控制等情况进行了简单阐述。     

复杂结构簇合物的新稠合规则

提出了计算复杂结构族合物价电子数 (NVE)的公式 ,并提出了应用该公式的几条规则 .同时 ,把公式与著名的Mingos稠合规则进行了简单的比较     

传染病医院污水处理工艺选择案例

文章通过对临汾市传染病医院拟建的传染病区污水的来源、排放量、污染物的分析,结合污水处理原则,提出了具体的污水处理工艺。并根据污染物去除率预测了污染物浓度,与污染物排放标准进行对比分析,结果表明所选工艺处理后的污染物浓度能够达标,污水处理工艺是可行的。     

40Cr大轴断裂分析

对冶金矿山某产品的40Cr材料制作的大轴热处理后发生断裂现象，进行了理化检验及综合分析，找出了造成大轴断裂原因－首先是由于存在淬火应力，而未得到及时回火，其次是原材料中存在严重的冶金缺陷。     

中水回用前景及其实际意义

概述了中水及中水回用的概念,分析了目前中水回用中存在的问题,探讨了水源热泵技术的应用。     

铝厂污水零排放研究

本文从水质方面分析了西南某铝厂污水零排放的可行性。为了实现污水零排放,对该铝厂东片区、氧化铝厂、热电厂三大污水处理系统进行改进。从现场试验监测及统计分析结果表明,改进后的处理系统处理的水质满足再生水水质指标要求,该铝厂污水零排放的实现创造了极大的经济和社会效益。     

反渗透系统的设计思路探讨

反渗透作为一种重要的水处理技术,越来越广泛地应用到各种领域,其处理水源也变得复杂多样化,因此要求在反渗透系统和反渗透预处理设计时予以高度关注。本文主要讨论针对不同水源时反渗透系统的设计思路。     

识别混凝土板内部缺陷的人工神经网络算法

以一维有缺陷混凝土板为研究对象，分别采用Leverberg-Marcluardt和径向基神经网络算法，对缺陷的深度与厚度进行识别，从而实现对混凝土板内部缺陷的三维重构，称为红外CT模拟．两类神经网络算法的识别结果表明：Leverberg-Marcluardt神经网络较径向基神经网络具有更好的收敛精度与计算效率．