FeCo-based hybrid MOF derived active species for effective oxygen evolution

Metal-organic frameworks(MOFs) have been regarded as promising catalyst materials due to the richness of coordinately unsaturated metal sites on the surface,which can act as catalytic active centres.In this study,a hybrid MOF material composed of Fe-based MOF and Co-based MOF was prepared with the involvement of graphene oxide nanosheets as additive.It was demonstrated that the hybrid MOF materials showed much higher electro-catalytic activity towards oxygen evolution than the single-phase counterparts.To drive current density of 10 mA cm~(-2),the hybrid CoFe-based MOF only needed an over potential of 290 mV in 1 M KOH.The catalytic activity could sustain for a longer time with only slight current density decrease.During oxygen evolution operation,the MOF catalyst evolved into catalytic active species but kept well the microscale sheet-like structure.It is thus believed that this study will provide an avenue for the development of advanced electrocatalysts.     

Acyl-chloride functionalized graphene oxide chemically grafted with hindered phenol and its application in anti-degradation of polypropylene

In this study,graphene oxide (GO) nanosheets were first functionalized by the acyl-chloride reaction and then reacted with hindered phenol (HP) to obtain HP grafted GO (GO-g-HP).The GO-g-HP prepared under the optimized condition exhibited a high efficiency against both thermal and photo oxidation of isotactic polypropylene (iPP).GO-g-HP exhibited a much better anti-aging efficiency than that of HP and GO used individually or that of their physical mixture.The outstanding anti-aging effect of GO-g-HP was attributed to the excellent synergistic effect produced between the chemically bonded GO and HP,which resulted in an improved oxygen barrier property of GO and excellent utilization of the free radical scavenging capability of GO and HP.Also,thanks to the grafting of HP on GO,the physical loss of HP,which was one of the main shortcomings for traditional small molecular antioxidants,was largely suppressed.It is expected that the GO-g-HP prepared can well meet the requirement of long-term applications of polymers in some harsh service conditions.     

氧化还原介体催化强化污染物厌氧降解研究进展

 由于厌氧生物处理技术具有产生剩余污泥少、可回收能源等优点而被广泛用于处理各种有机污染物，尤其在有毒、有害、难降解污染物的去除方面取得了良好的效果。然而，厌氧生物法的处理速率通常比较低，而氧化还原介体可通过自身不断的氧化和还原来传递电子，提高电子在氧化还原反应过程中的传递速率，从而促进污染物高效厌氧降解。醌类物质和腐殖酸是应用较多的氧化还原介体，在催化难降解污染物降解方面取得了一定效果。讨论了氧化还原介体的特点、作用机制，并总结了其对偶氮染料厌氧脱色、反硝化和多氯联苯厌氧降解的强化作用，提出了氧化还原介体未来的研究方向。     

重油催化装置反应系统的技术改造

为了减少炼油厂高低并列式两段再生重油催化裂化装置频繁停工 ,降低干气产率 ,提高加工能力和掺渣能力 ,兰州石化公司炼油厂对该装置进行了技术改造 ,同时多产了液态烃和柴油 .新鲜原料和回炼油改由 BWJ型高效雾化进料喷嘴注入 ,沉降器由原来的三叶快分换为全封闭直联快速分离系统 ,在原来采用急冷油作终止剂的基础上 ,新增急冷水 .通过改造 ,有效地降低了干气产率 ,减少了结焦 ,增加了轻质油收率 ,提高了装置的加工能力、掺渣能力及柴汽比 ,较好地实现了预期目标     

工程中常用的几种氧化沟及其发展

简要介绍了当今工程中常用的几种氧化沟技术的特点及其发展历程,主要包括Carrousel氧化沟、Orbal氧化沟、交替式氧化沟以及一体化氧化沟。     

催化电位法测定人发中痕量碘

采用碱灰化法消解发样,于中性溶液中离心去除杂质,在酸性溶液中以催化电位法测定发碘含量,回收率达98.6％;变异系数(CV)为8.7％;测出中碘地区一个教学班20名男学生发碘平均含量为0.93μg/g,与文献报道相近。     

pH、温度和浓度对苯酚在V掺杂MoOx-C/Ti电极上的电催化氧化的影响

采用溶胶-凝胶法合成MoOx、MoOx-V5 (x%)胶体,通过Vulcan XC-72炭黑负载制备炭载钼系氧化物电催化剂.利用循环伏安法(CV)测试手段研究苯酚在电极上的氧化降解,考察了掺杂元素、溶液pH值、苯酚浓度、扫描速率、温度对苯酚氧化性能的影响.测试结果表明:苯酚在电极上的氧化是受扩散和电子转移联合控制的复杂过程;掺杂过渡金属元素V可以降低苯酚氧化的表观活化能,提高电化学性能;溶液的pH值越低,MoOx-C/Ti电极对苯酚的催化氧化活性越高;pH在0～6,苯酚的氧化经历了相似的历程,包含了相同的电子数和质子数;苯酚氧化峰电流随着浓度、温度的增加而增加,到一定程度后趋于稳定.     

选择性催化氧化H2S的催化剂研究

在考察了几种单组分氧化物把硫化氢催化氧化为单质硫的基础上，采用共沉淀法合成了3种复合氧化物催化剂A，B，C，并考察了它们的催化活性和选择性．结果表明，在一定条件下，催化剂B的转化率和选择性分别在90％和97％以上，在40h的催化性能稳定性测试中，其转化率和选择性均能保持稳定，具有良好的催化性能．     

高岭土催化甲醇脱水制二甲醚的研究

比较研究了高岭土的结构特征,采用常压微型反应装置评价了高岭土作为催化甲醇制二甲醚催化剂的活性,并对高岭土进行了酸处理改性研究.结果表明,高岭土中高结晶度的高岭石有利于催化甲醇脱水制二甲醚,酸处理改性能提高高岭土的催化活性.     

相转移催化剂在合成苯乙哌啶中间体中的应用

用相转移催化剂的方法合成革乙哌啶的中间体,对原生产工艺进行了改进,摸索出中间体合成的最佳条件和最高收率,使改进前后的合成收率由34.6%提高到72.4%。