Digging with ‘hands’: observations of food capture in the flying gurnard Dactylopterus volitans (Linnaeus, 1758)

ABSTRACT

Videofilms of a foraging flying gurnard (Dactylopterus volitans) were collected at Itaipu, Niterói, RJ, Brazil. Analysis revealed details of the use of anterior parts of the pectoral fins which act as digging ‘hands’ to access infaunal prey items that are subsequently captured by oral suction feeding. Each pectoral fin has two distinct sections articulated separately on the pectoral girdle. The digging ‘anterior pectoral fin’ mainly consists of segmented and flexible fin rays but has an anterior robust unsegmented ray that provides an edge to the ‘hand’, allowing penetration of the substratum. The huge ‘posterior pectoral fins’ are supported by unsegmented rays. Most digging episodes involved one ‘hand’ and consisted of 1–7 cycles of movement with frequencies 1.15–3.74 cycles s^?1. During a cycle, the ‘hand’ is moved forwards and medially above the substratum, then is twisted medially and simultaneously depressed so that the anterior unsegmented ray impacts and enters the substratum. The hand is then drawn backwards and laterally to disturb the substratum. To prevent upward pitching of the head during digging, the ‘posterior pectoral fins’ are both moved anteriorly and laterally to shift the centre of gravity forwards while the caudal and ?second dorsal fins continue to provide propulsive force.     

疏松砂岩油藏大孔道定性识别新方法研究

疏松砂岩油藏在长期注水开发过程中,往往伴随着大孔道的出现,这严重影响了油藏水驱开发效果,制约了采出程度的进一步提高,因此,大孔道识别及有效封堵成为该类油藏急需解决的关键问题.通过研究分析,确定了影响大孔道从形成到发展的7种主要静态因素,以及标志大孔道形成的6种主要动态因素.将层次分析法及灰色关联法相结合,分别计算静态及动态因素的权重,建立了全新的大孔道定性识别模型.示踪剂监测结果验证了该方法的实用性和有效性.     

Geochemistry of Clayey Aquitard Pore Water as Archive of Paleo-Environment,Western Bohai Bay

The record of paleo-environment in clayey aquitard pore water is much more effective relative to aquifer groundwater owing to the low permeability of clayey aquitard. Oxygen-18 (18O), deuterium (D), an...     

火焰原子吸收分光光度法测定地表水中铜含量的不确定度评定

根据GB 7475—87《水质铜、锌、铅、镉的测定火焰原子吸收分光光度法》建立地表水样测定的数学模型,并根据JJF 1059.1—2012《测量不确定度评定与表示》的要求,计算测量过程中的不确定度分量,最终得出扩展不确定度.经检测计算,该地表水样品中的铜含量为1.53 mg/L,其扩展不确定度为0.036 mg/L,包含因子k=2,地表水样品中铜含量的测量结果应报告为(1.53±0.036) mg/L, k=2.结果表明,火焰原子吸收分光光度法测定地表水样中铜含量的不确定度主要来源于标准曲线拟合、标准溶液配制和样品重复测量.     

封闭式运动减肥对肥胖青少年体质健康的影响

对44名14～19岁肥胖青少年进行6周的封闭式饮食控制及运动,测定实验对象的身体形态、身体机能、身体素质和血液健康等指标.通过数理统计方法对实验所测得的数据进行分析.结果表明:肥胖青少年的脂肪量、体质量、体脂率都有明显的下降(P0.05);肺活量逐渐上升,身体素质指标(耐力、柔韧、50 m跑)与血液健康指标(血脂TC、甘油三酯TG、空腔胰岛素FINS)都呈非常明显改善(P0.01).封闭式运动减肥对青少年肥胖者体质健康具有良好的效能表现.     

基于交通信号灯信息的混合动力汽车节能预测控制方法

针对传统混合动力汽车控制方法不考虑已知道路交通信号灯信息对车辆能量管理影响的问题,提出了基于交通信号灯信息的混合动力汽车节能预测控制智能优化策略。通过建立混合动力汽车系统的简化模型,并采用连续广义最小残量方法求解模型预测控制问题。运用MATLAB/Simulink进行仿真,仿真结果验证了交通信号灯信息模型的有效性,以及所设计的模型预测控制算法大幅度提高混合动力汽车的燃油经济性的能力和实时控制性能。研究结果表明所提出的控制策略可以实现车辆行驶轨迹的优化控制,显著提高了车辆的燃油经济性,并满足系统的实时最优控制要求。     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.     

超临界水氧化处理有机物废料的新技术

和传统方法相比，超临界水氧化处理有机物废料有着极大的优势。介绍了处理废料的原理和工业应用的可能性。     

Pilot Study on Nanofiltration Combined with Ozonation and GAC for Advanced Drinking Water Treatment

IntroductionThe conventional process for surface water treatment,which consists of flocculation, sedimentation and filtrationcurrently, had been applied inproducingdrinkingwater formany years. Although this process can remove turbidityand bacteria in surface water effectively, only about from20% to 30% of natural organic matter ( NOM) can beeliminated. When the purified water is disinfected bychlorination, these NOMs may react with chlorine. As aresult some dis…     

山西省吕梁区灌溉用水定额的编制

文章以调查典型县现状年灌溉用水定额为基础 ,以当地灌溉水可利用量为控制条件 ,采用逐级平衡的办法 ,制定吕梁区主要作物的灌溉用水定额