硬线控制冷却工艺

研究了影响硬线性能的主要工艺参数，这些参数是决定线材最终产品质量的关键，并初步讨论了其影响规律。     

液压支架压力变送器的电路设计

分析了液压支架的压力特性并提出对压力变送器的技术要求，阐述了压力传感器的选择和外围电路的设计，对压力变送器的信号调理电路进行了仿真分析。     

中水回用前景及其实际意义

概述了中水及中水回用的概念,分析了目前中水回用中存在的问题,探讨了水源热泵技术的应用。     

Developmental modes of the Neoproterozoic-Lower Paleozoic marine hydrocarbon source rocks in China

Based on the researches on rock type, the mode of occurrence, diagnostic minerals and creatures, the sedimentary geochemistry and organic facies of Chinese marine source rocks from wells and outcrops, and on the research findings of developmental modes of foreign marine source rock, the authors consider that it is impossible to objectively make clear the formation mechanism of hydrocarbon source rock with high organic matter abundance by either single mode of preservation or high organic matter productivity. According to the Chinese geological features, the formation mechanism of the Neoproterozoic-Lower Paleozoic marine source rock is generalized into four modes, namely, thermal water activity-upwelling flow-anoxic; carbonate gentle slope-upwelling flow; xerothermic climate-brine euxinic milieu; and humid climate-retained euxinic milieu; as the Lower Cambrian undercompensation basin organic facies （the Tarim Basin, South China and southwestern margin of North China）, carbonate gentle lime mud bound organic facies （the Upper Ordovician in Tazhong region of the Tarim Basin and the Lower Silurian in the Upper Yangtze Platform）, the Middle Cambrian evaporation laggon organic facies （the Tarim Basin and the Upper Yangtze Platform）, enclosed undercompensation terrigenous bay organic facies （the Middle-Upper Ordovician in the west of the Tarim Basin, the Lower Silurian Long- maxi Formation in the Upper Yangtze platform）. Chinese marine sedimentations with lower organic matter abundance are generalized into two modes of consumption-dilution mode of open epicontinental sea and depletion-dilution mode of supercompensation basin.     

炭黑／结晶性含氟树脂合金在自控温加热电缆中应用

选择了结晶性含氟树脂添加改性剂为树脂基体，与炭黑制居复合导电体系。通过这个对体系不同条件下ＰＴＣ特性的研究，对其配方与加工工艺进行优化。并利用扫描电镜，Ｘ射线衍射，ＤＳＣ等分析测试手段，对体系的各种开矿结构进行了研究，阐明了该导电复合体系的形态结构与性能的关系。     

Carbon Nanotubes:from Nanoscale Building Blocks to Macrostructures

1 Results Carbon nanotubes (CNTs) have fascinating properties.In order to use these novel one-dimensional structures for applications such as in nano-electronic,nano-mechanical and electrochemical energy storage device and as structural elements in various composites,the structure of nanotubes needs to be tailored and various architectures and macroscale assembles have to be configured using nanotube building blocks.Nanotube macrostructures are macroscopically organized groups of CNTs,which are expecte...     

中外低保管理面面观

目前我国城市居民最低生活保障制度的执行情况进展良好。低保政策的执行在保障下岗和失业人员基本生活及促进就业和再就业等方面发挥了明显的作用。但贫困问题是一个世界性问题 ,我们应借鉴各国在缓解贫困方面的作法 ,促进我国城市扶贫工作的顺利进行     

"溶液吸附法测定活性炭比表面积"实验的改进

研究了吸附荆的颗粒度、吸附时间、吸附温度、原始溶液浓度对吸附平衡的影响，确定了新的实验条件：粒状活性炭破碎至60．100目；70℃恒温振荡0．5h后，再于室温振荡吸附1．5h；原始溶液的溶质质量分数为2％左右．改进后，提高了实验精密度，缩短了实验时间．     

催化裂解法制备螺旋状碳纳米管的实验研究

在硅片上用直流溅射镀铁的方法制备催化剂 ,通过乙炔在 70 0°C下催化裂解制备碳纳米管 .对热解产物进行了扫描电镜观察和 X射线衍射测试 .本文通过对有氢气预处理和没有氢气预处理两种情况下催化裂解法制备的碳纳米管的形貌、管径大小等性质的研究 ,来初步揭示螺旋状碳纳米管的生长机理 .     

气体催化裂解法制备高纯碳纳米管的研究

利用有机气体化学裂解技术 ,用二甲苯作碳源 ,二茂铁作催化剂 ,噻吩作助长剂 ,氢气作载气 ,对碳纳米管的制备进行了研究 .研究结果表明 ,二甲苯流量、氢气流量及有机气体裂解温度等工艺参数对碳纳米管的产量及形态有很大的影响 ;在反应温度为 10 0 0～ 110 0℃ ,氢气流量为 15 0mL·min- 1,二甲苯的流量为 0 .12 1mL·min- 1时 ,能获得直径为 4 0～ 10 0nm的碳纳米管 ,碳纳米管的纯度可达 95 %以上 .