关于SBS改性沥青施工技术的探讨

根据实际路面施工试验情况,介绍了SBS改性沥青的施工工艺及技术要求。     

两个动能耦合Morse振子系统的分岔现象

从两个未耦合的Morse振子出发,首先研究了两个动能耦合的Morse振子系统局域模区域内的分岔结构.发现对弱耦合参数δ,相空间中局域模谐振nm共存与系统能量ε通过不等式 √1/1-ε≥n/m≥√1- ε相关联.同时报导了对称伸缩本征模的分岔现象与能量及耦合常数的关系.在弱耦合参数δ下,在非常低的能量区域内,对称伸缩经历一个pitch-fork分岔.随后,局域模随能量的增加逐渐形成.对中等高能量ε,对称伸缩本征征模在耦合参数范围[-1,0]内由不稳定到稳定到不稳定等交替变化.     

利用积分算子方程的小波－矩量法分析频率选择反射面

小波－矩量法以小波基作为矩量法中的基函数，通过Ｇａｌｅｒｋｉｎ法可以获得很稀疏的阻抗矩阵，用迭代法求解时可减少计算机内存和计算时间。该文以有限尺寸的频率选择反射面为例，用小波－矩量法分析散射特性和电流分布，着重讨论了阻抗矩阵的稀疏化程度对计算精度的影响。结果表明，当非零元素仅为１０％时，仍能达到满意的精度，因此小波－矩量法不失为分析电大尺寸问题的一种有效方法     

The Experimental and Theoretical Research of “Local Resonance“ in Ultrasonic Honing System

In 1982, Professor Fang Guoliang found the “Non full resonance“ phenomenon in a tool system while he use the thin-long tool ultrasonically machining deep-small hole. He called it as “local resonance“. Also this “Non full resonance“ phenomenon was discovered in the ultrasonic drilling and the ultrasonic honing system later. To its mechanism, professor Fang thought that the coupling of long-thin tool bar and driving system is weak, so the tool bar can vibrate independently, but the quantitative relation betwe...     

Study on End Milling Generation Surface Model and Simulation in View of Main Axle s Tolerance

In accordance with the relative movement between end-milling cutter and workpiece surface, a theoretical generation model for milled surface was established with the movement error of principal axle considered. Then the milled surfaces under various cutting condition were simulated, the results of which showed that end milled surfaces were of “vaulted profile“, heights of surface irregularty at various points to be different with maximum value in the middle and smaller at both sides, the difference were ...     

应用核磁共振实验实现量子计算的注记

从量子力学的基本原理出发,阐述了利用核磁共振进行量子计算的实验方法,澄清了有关文献中若干容易混淆而又十分重要的概念,并进一步报道CNOT门操作的实验方法和结果.实验结果与理论的预言一致.     

Preparation and properties of the SmOx/Rh(100) model surface

The preparation of SmOx/Rh(100) and CO adsorption on this model surface have been investigated with Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption spectroscopy (TDS). The oxygen adsorption on the SmRh alloy surface leads to the aggregation of Sm on the surface. The thermal treatment of this oxidized surface induces the further agglomeration of SmOx on the Rh(100) surface. Compared with CO TDS on the clean Rh(100) surface, three additional CO desorption peaks can be observed at 176, 331 and 600 K on the SmOx/Rh(100) surface. The CO desorption peak at 176 K may originate from CO adsorbed on SmOx islands, while the appearance of the CO adsorption peaks at 331 and 600 K, depending on the oxidation state of Sm, is attributed to CO species located at the interface of SmOx/Rh(100).     

一种新的计算周期表面电磁散射算法

利用数值方法研究周期表面的电磁散射问题。应用矩量法研究周期表面的电磁散射可以获得较为精确的数值结果。对于表面散射 ,应用矩量法时表面未知变量的数目非常大 ,即使对于一维表面也需要几千个未知变量 ;当求解矩阵方程时 ,计算机对求解的问题有内存和速度的限制。为了克服内存的限制 ,采用了一种新的迭代数值算法。对周期表面的电磁散射问题进行了研究 ,并与矩阵反演方法作了比较。所得结果表明 ,这种新的迭代法具有很好的收敛性。最后对散射结果进行了讨论     

核磁共振技术在生物和医学上的应用

本文介绍了在生物和医学领域内应用核磁共振技术的历史，应用的主要方面，以及三种常用的自旋核，并指出了与传统的技术和ＣＴ成像相比，磁共振技术具有更多的优点．     

器件表面保护用有机硅漆导电机理的探讨

通过测量不同固化条件下高压硅器件用有机保护材料聚酯改性硅有机漆SP的电阻率随温度变化的规律,并借助于对经各种条件固化后SP的热重、差热分析、红外光谱分析,研讨了它的高温导电机理.实验结果表明,在一定的固化条件下,固化后的材料在高温时具有最高的电阻率,材料中离子输运最弱,并具有较佳微观结构,这时材料的固化温度是210℃.提出了SP的高温电导主要是含羟基的分子产生的本征离子电导的新观点,建立了SP的高温导电模型,并对电性能测量结果作出了新的解释.