循环应力对储气库岩石微观结构及力学性质影响数值模拟

针对储气库循环注采过程中循环应力对储气库岩石产生疲劳损伤的问题。利用颗粒离散元法建立岩心真三轴数值模型,根据岩心室内试验标定数值模型参数,然后对数值模型进行多周期等幅值轴向循环应力加载,研究循环应力对储气库岩石微观结构及力学性质的影响。结果表明:循环应力加载过程中,模型内生成的无黏结接触数量和微裂缝数量逐渐增多,而生成位置受原始裂缝控制明显,模型孔隙度逐渐减小,且模型内无黏结接触数量、微裂缝数量和孔隙度的变化速率均呈递减趋势;相同应力水平下模型侧向应变和轴向应变均增大,但侧向应变占主导地位;模型弹性模量逐渐降低,而模型泊松比和损伤量逐渐增加,且模型弹性模量、泊松比和损伤量的变化速率均呈递减趋势。     

A357履带板的半固态触变成形工艺研究

采用半固态触变成形实验,对履带板件进行了模具设计、成形工艺参数制定,成功制得A357铝合金履带板件。并通过拉伸试验和微观组织观察,研究了T6热处理工艺对零件的力学性能和微观组织的影响。试验结果表明:经过T6热处理工艺,过饱和的基体中不断析出强化相Mg₂Si并高度弥散分布在晶粒内部与晶界处,零件的强度得到较大提高。     

微波接力组网的节点再优化研究

为进一步完善常规方法构建的微波接力网组网拓扑,提出了一种基于最优链路集的网络节点再优化方法。该方法综合考虑节点吸引系数、链路衰落概率、节点通信冗余等因素,借助网络拓扑优化的思想,采用遗传算法构造了微波接力网的最优链路集;以节点在该集合中的度为依据,通过对节点的合理排序,以部分用户节点代替非必要的干线节点,完善了组网拓扑。在修改链路和节点价值集后,该方法还可解决其他网络干线、中继节点的选择问题。     

Effect of Graphene Nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method

In recent years, graphene has attracted considerable research interest in all fields of science due to its unique properties. Its excellent mechanical properties lead it to be used in nano-composites for strength enhancement. This paper reports an Aluminum–Graphene Nanoplatelets(Al/GNPs)composite using a semi-powder method followed by hot extrusion. The effect of GNP nano-particle integration on tensile, compressive and hardness response of Al is investigated in this paper. It is demonstrated that 0.3 wt% Graphene Nanoplatelets distributed homogeneously in the matrix aluminum act as an effective reinforcing filler to prevent deformation. Compared to monolithic aluminum(in tension), Al–0.3 wt% GNPs composite exhibited higher 0.2% yield strength(+14.7%), ultimate tensile strength(+11.1%) and lower failure strain( -40.6%). Surprisingly, compared to monolithic Al(in compression), Al–0.3 wt% GNPs composite exhibited same 0.2% compressive yield strength and lower ultimate compression strength(- 7.8%),and lower failure strain(- 20.2%). The Al–0.3 wt% GNPs composite exhibited higher Vickers hardness compared to monolithic aluminum(+11.8%).Scanning electron microscopy(SEM), Energy-Dispersive X-ray Spectroscopy(EDS) and X-ray diffraction(XRD) were used to investigate the surface morphology, elemental percentage composition, and phase analysis, respectively.     

朝鲜崖柏生境及高生长规律分析

采用标准地调查法测定朝鲜崖柏的土壤特征、林下植被和高生长规律.结果表明:朝鲜崖柏生长于土层较薄且呈弱酸性的山地暗棕壤,不同标准地林下植被差异明显;不同标准地朝鲜崖柏树高的年生长量均呈逐年下降趋势.     

Preparation and Mechanical Properties of a Novel Textile Pad for Wound Debridement

Various types of wound debridement approaches are currently available in clinical practice such as autolytie, enzymatic. biodebridement, mechanical, and surgical debridemenl techniques. A critical look at these various options can explain their potential but also their limitations. In this study, a novel textile pad, which is composed of polyester filaments on the fleecy side and a bioeompatible coating on the opposite side, was made to provide a safe, inexpensive, easier and especially more efficient debridement process that can be used in all healthcare settings by all healthcare practitioners. Eighteen kinds of samples were prepared with different pile density, ground yarn count and coating amount. Dimensional morphology, stitch density, mass per unit area and mechanical properties were investigated to study the intrinsic relationship of structure and properties of textile pad for wound debridement. Results showed that tensile strength and suturing strength at piped site increased obviously with the increment of ground yarn count, while the amount of coating could also have a slight impact on these two properties. However, compressive load was mainly affected by pile density, with no obvious relation to ground yarn count and coating amount.     

水热法制备Li_(4-3x)Eu_x(WO_4)_2微晶及其发光性能

采用水热法制备了Li_(4-3x)Eu_x(WO_4)_2系列红色荧光粉.通过荧光分析(FL)、扫描电镜(SEM)和X射线衍射(XRD)对所得粉体的发光性能、颗粒大小及形貌和物相进行表征分析.XRD分析结果表明,制备的Li_(4-3x)Eu_x(WO_4)_2微晶均为白钨矿四方结构.SEM结果表明,Li_(4-3x)Eu_x(WO_4)_2颗粒度为2.0μm×0.2μm~12μm×1.0μm,且随x的增大而增大.荧光分析结果表明,该荧光粉可被近紫外光(395nm)有效激发,最大发射波长位于614nm,即为纯正的红光.随着x的增大,样品中Eu~(3+)的593nm和614nm两个特征发射峰的强度先增大后减小,当x=1.0时达到最大.     

离子液体[C2mim]NO3与[C2mim][MetSO4]的热力学性能研究

采用MDY-2型密度仪在常压、一定温度范围内对离子液体1-乙基-3-甲基咪唑硝酸盐(简写为[C2mim]NO3)和1-乙基-3-甲基咪唑硫酸甲酯盐(简写为[C2mim][MetSO4])的密度进行了测定.结果表明,离子液体的密度随温度升高呈线性下降的趋势.由离子液体的密度值计算得到离子液体[C2mim]NO3和[C2m...     

微波促进下无溶剂合成染料中间体不对称偶氮化合物

研究了在微波促进下由不对称N，N’一氢化偶氮苯合成一系列偶氮化舍物的问题。发现了一种合成不对称偶氮苯类化舍物的新方法。与传统方法相比，该方法具有收率高、选择性好、后处理过程简单以及对环境友好等优点，为染料中间体的合成提供了一条经济实用的新途径。     

新型微生物源天然食品防腐剂及其抑菌性能

天然食品防腐剂按其来源不同可分为植物源天然防腐剂、动物源天然防腐剂以及微生物源天然防腐剂等类型。天然微生物源食品防腐剂由于其本身的优越性,越来越受到人们的青睐。主要对5种新型微生物源天然食品防腐剂(即乳球菌肽、溶菌酶、聚赖氨酸、苯乳酸及曲酸)的理化特性、抑菌机制和抑菌特性等进行了概括和论述,旨在为我国新型、安全、高效微生物源天然食品防腐剂的研究和开发提供参考。