超声检测卵巢间质面积与总面积比值在多囊卵巢综合征诊断中的价值

目的探讨应用超声检测卵巢间质面积（S）、总面积（A）,计算S/A比值诊断多囊卵巢综合症（PCOS）的价值。方法对50例PCOS患者（PCOS组）和52例有正常排卵的不孕症患者（对照组）行阴道超声（TVS）检查,测量卵巢S、A,计算S/A比值;检测两组患者的血清睾酮（T）、黄体生成素（LH）、卵泡刺激素（FSH）,计算LH/FSH比值。并对PCOS组检测空腹血糖（FPG）和空腹胰岛素（FIN）,计算稳态模型指数（HOMA-IR）来评估胰岛素抵抗。结果PCOS组S、S/A比值显著高于对照组（P〈0.01）。PCOS组S、S/A比值与T、LH、LH/FSH比值呈正相关,与FSH无相关性。PCOS组S/A比值与HOMA-IR呈正相关。结论S/A比值、S可作为辅助诊断PCOS的指标。     

加载物布局对混响室参数的影响

针对加载物广泛用于混响室的相关实验,结合已有的理论和研究成果,通过大量实验分析其布局和数量变化对于腔室内相关参数的影响.总结混响室中概率分布、标准偏差、Q值、独立采样点数的测试与计算方法,并通过测试混响室内的场强、功率和S21参数得到相关数据和结论.通过综合分析加载物对于四个参数的影响,其放置于混响室边缘以及距离地面一定高度的加载布局要好于放置于中央地面处,且加载后对于参数的变化并非都是有益的.在进行实验时,相关参数也会随着加载物数量的变化而改变,同时过量加载会对实验本身会起到适得其反的效果.     

混凝土塑性损伤模型参数的研究

基于相关的试验研究成果,提出了一种确定混凝土塑性损伤模型(KC模型)强度参数取值的方法.针对KC模型损伤参数取值依赖于单元尺寸的问题,以我国混凝土规范为基准,阐述了损伤参数值的调整方法,使得数值计算结果更加合理.利用ANSYS/LSDYNA模拟混凝土常规三轴压缩试验,KC模型分别采用本文确定和程序自动生成的强度参数值,并将计算结果与国内外试验结果比较,研究表明:采用本文提出的方法确定KC模型强度参数值比较合理.     

Medical image compression by applying 3D DWT in PACS

The process of image compression in a practical Picture Archiving and Communication System (PACS) was discussed with detail. To fully reduce the inter-slice correlation existing in the volumetric image sets generated by CT and MR, 3D Discrete Wavelet Transformation (DWT) was introduced in our application. Instead of using a fixed quantizer of lossless low frequency and distinct loss of high frequency, an adaptive quantizer was devised taking MSE as the performance index. In the low frequency subband, DPCM was replaced withS+P transform to facilitate coding computation. Compared with JPEG or 2D DWT, our method is 20%–50% more efficient. Furthermore, preliminary tests showed that 33 dB may be the maximal distortion threshold for CT images. Biography: WANG Si-xian(1944-), male, Associate professor. Research direction: image processing.     

Discussion of gas enrichment mechanism and natural gas origin in marine sedimentary basin,China

There are abundant natural gas resources in Chinese marine sedimentary basin. The exploration hot shots of natural gas are the Palaeozoic marine strata here in recent years, and several large scale gas fields have been discovered. Chinese Palaeozoic high-post matured and coal measure hydrocarbon source rocks are mainly prone to gas generation in the present. This research considered that gas source rocks and TSR are the key cause of gas enrichment of marine strata. High-quality argillaceous and coal measure hydrocarbon rocks are distributed widely in the Palaeozoic marine strata, which have been in highly matured phase in the present. The argillaceous source rock generally contains various sulfates that could accelerate crude oil cracking to gas for TSR occurrence, and coal measure source rock mainly generates gas, so Chinese marine basin gives priority to accumulating gas. Marine strata have not founded oil reservoirs in the Sichuan Basin and Ordos Basin, and they consist mainly of dry gas. Marine natural gases are the mixed gases of oil cracking gas and coal-formed gas in a general way, oil cracking gases contain usually some H2S and CO2. Hydrocarbon carbon isotopes are very complicated, and methane and ethane isotopic values bear apparent reversal caused by thermal evolution and mixing among different genetic types of natural gas. Coal-formed gases are the main component of Chinese marine natural gas. The Upper Permian of the Sichuan Basin and the Carboniferous-Permian of the Ordos Basin coal measure hydrocarbon source rock present large hydrocarbon generation potential, which are the prospecting highlight of marine natural gas hereafter. Oil cracking gas exploration will be paid much attention to in the Tarim Basin because of the lack of coal measure hydrocarbon source rock.     

基于3层C/S模式的邮政电子化生产作业系统的设计与实现

邮政电子化支局生产作业系统是邮政综合网的一个应用系统，是联机交易处理系统，采用3层C／S模式，并在3层结构中利用BEATuxedo分布式事物处理中间件，设计并实现了邮政电子化支局生产作业系统。     

一株土壤源高产植酸酶芽孢杆菌的分离与鉴定

对河南省不同地点采集的45份土样,利用分离培养基对产植酸酶芽孢杆菌进行分离和纯化,采用钒钼酸铵法测定其酶活,结合菌落和显微形态、生理生化试验和16S rDNA序列鉴定其种属。鉴定结果表明:从分离的80余株菌中筛选获得一株有较大植酸酶酶活的菌株B.Ld2-C,植酸酶酶活为552 U/mL。经鉴定为纺锤形赖氨酸芽孢杆菌(B.sphaericus),能形成芽孢,而且该菌株能够耐受较强的酸、胆盐和高温,为研究其作为饲料添加剂菌种奠定了良好基础。     

基于工作流的PDM应用系统研究

介绍了工作流管理的现状和 PDM系统的体系结构 ,提出一种以工作流管理为核心的PDM系统解决方案 ,通过在 PDM系统中集成 STEP标准建立信息模型和数据交换 ,增强系统在信息和应用集成的过程中的适应性和开放性 ,提供基于 Internet/ Intranet的共享零件库和标准工程手册数据库 ,将工程设计和管理人员解放出来 ,提高产品设计和资源利用率 .     

第一性原理计算Zr/S共掺杂锐钛矿相TiO_2的电子结构

利用基于密度泛函理论的第一性原理平面波赝势方法对Zr/S共掺杂锐钛矿相TiO2的晶格参数、电荷布居、能带结构、电子分态密度和吸收光谱进行了计算.计算结果表明:Zr/S共掺杂导致锐钛矿相TiO2的晶格畸变使其体积变大,共掺杂时Zr和S的电荷布居数与单掺杂前的布居数略有不同;Zr/S共掺杂还导致锐钛矿相TiO2的禁带宽度变大0.1eV,达到2.30eV,但是由于Zr/S共掺杂在TiO2禁带之内引入了杂质能级,这些杂质能级可以作为电子跃迁的"台阶"而降低电子从价带跃迁到导带所需的激发光子能量,这有可能是实验上制备的Zr/S共掺杂TiO2具有较高光催化活性的内在原因.     

网上行政审批系统的设计与实现

分析了现有网上审批系统提供的服务,研究了当前的行政审批模式及其存在的问题,针对这些问题设计了基于ASP.NET的网上行政审批系统.以某县网上行政审批系统为例,首先对系统进行了详细的需求分析、完善的功能设计和科学合理的数据库设计,并给出了相应的类图、用例图和E-R图,最后在Visual Studio 2008开发环境下实现了网上行政审批系统.