脉冲无氰电镀在硅基RF-MEMS滤波器中的应用及优化

针对硅基RF-MEMS带通滤波器制备过程中金层电镀沉积工艺,基于亚硫酸金盐无氰电镀液,并结合脉冲电镀技术,通过对电流密度、占空比、正负脉冲时间比、脉冲频率、温度、搅拌速率等相关工艺参数进行优化组合,实现了所设计的硅基双层自屏蔽式RF-MEMS带通滤波器制备与测试,也为相关RF-MEMS器件制备提供了工艺指导.      

壳聚糖—纳米金自组装葡萄糖生物传感器的研究

利用壳聚糖与纳米金构建一种新型的葡萄糖生物传感器。探究不同浓度的葡萄糖溶液、p H及温度对传感器响应电流的影响。结果表明,此传感器在温度为35.0℃,p H=7.00,葡萄糖质量浓度为0.018~25.7 mg/L范围内有良好的线性,线性I=4.135 6 m+91.787μA,R2=0.997 9,检出限为0.001 2 mg/L。该传感器具有制备简单、方法简便、灵敏度高,能快速检测等优点。     

Structural,morphological, and optical properties of tin(Ⅳ) oxide nanoparticles synthesized using Camellia sinensis extract: a green approach

Tin oxide (SnO2) nanoparticles were cost-effectively synthesized using nontoxic chemicals and green tea (Camellia sinensis) extract via a green synthesis method.The structural properties of the obtained nanoparticles were studied using X-ray diffraction,which indicated that the crystallite size was less than 20 nm.The particle size and morphology of the nanoparticles were analyzed using scanning electron microscopy and transmission electron microscopy.The morphological analysis revealed agglomerated spherical nanoparticles with sizes varying from 5 to 30 nm.The optical properties of the nanoparticles' band gap were characterized using diffuse reflectance spectroscopy.The band gap was found to decrease with increasing annealing temperature.The O vacancy defects were analyzed using photoluminescence spectroscopy.The increase in the crystallite size,decreasing band gap,and the increasing intensities of the UV and visible emission peaks indicated that the green-synthesized SnO2 may play future important roles in catalysis and optoelectronic devices.     

Optical sensing of explosives in wastewater by competitive complexation

A facile strategy for optical sensing of explosives with the assistance of 1,3,5-Triazine-2,4,6-triamine(MEL) in aqueous solution is proposed. Upon exposure to MEL, the electron-sufficient amino group in MEL was prone to form complexes with electron-deficient nitro group in explosives. The interaction could be tuned by the amount of MEL to fully consumed nitro-contained explosives dissolved in wastewater, thus prevented the gold nanoparticles(GNPs) from combining with MEL. In comparison with common detection method, the dose-response curve procedure reported here was in good linear relationship from 0 μM to 80 μM with good correlation factor(R~2= 0.9871), and was satisfactorily agreed with the proposed theoretical model. The detection limit(Lo D) was1.1 μM by spectrometer, 3.0 μM visualized by naked eyes and 21.3 nM by calculation. The procedure described in this study could be finished within a few minutes and showed its effectiveness in explosive detection upright on the gold surface in real wastewater, making this proposed method a powerful tool in several sensing platforms.     

新型金纳米薄片的制备与生长研究

在表面活性剂PVP的辅助下,利用高温溶剂热法,合成了星形、盾形和多边形等新型Au纳米薄片.对其结构分析表明,Au纳米薄片均为单晶,边长为数微米,厚度约40 nm.这些新型的Au纳米片的形成可以理解为(111)面沿着〈211〉和其他高指数面的生长.不同晶面表面能的理论模拟可以很好解释(111)晶面沿高指数方向生长的可能性.利用堆垛层错引导晶体生长可以很好地解释选区电子衍射中的分数衍射及晶面间距.     

Influences of ultrasonic irradiation on the morphology and structure of nanoporous Co nanoparticles during chemical dealloying

The Co-61.8 wt% Al nanoparticles of 45 nm were prepared by hydrogen plasma-metal reaction (HPMR) method. The nanoparticles display core shell structure with Al13Co4 and CoAl core and aluminum oxide shell (about 2 nm). Under ultrasonic irradiation, nanoporous fcc-Co nanoparticles were produced successfully by chemically dealloying the Co-Al nanoparticles at room temperature, whereas, without ultrasonic irradiation CoAl phase could hardly react with sodium hydroxide solution. At 323 K the Co-Al nanoparticles could be dealloyed to fcc-Co and hcp-Co phases even without ultrasonic irradiation. The surface area of the dealloyed nanoparticles under ultrasonic irradiation was larger than that of the dealloyed sample without ultrasonic irradiation at the same temperature. It is believed that the microjet and shock-wave induced by ultrasonic irradiation give rise to particles size reduction, interparticle collision and surface cleaning, and accelerate the dealloying process and the phase transformation.     

基于金纳米花表面增强拉曼散射光谱的三聚氰胺检测方法

以罗丹明6G为探针分子,结合紫外-可见吸收光谱,优化了两种还原剂:抗坏血酸和盐酸羟胺的加入体积,确定了金纳米花的最佳合成条件.以制备的金纳米花为增强试剂,结合便携式拉曼光谱仪,建立了可用于三聚氰胺检测的分析方法.以679 cm-1处特征峰为定量依据,确定该方法线性检测范围为5~100μmol/L,标准偏差R2=0.9875,检测限达到1μmol/L,远低于国家标准(19.8μmol/L).     

超声乳化法制备纳米Fe3O4磁性颗粒及壳聚糖表面改性

采用超声乳化法制备纳米Fe3O4磁性颗粒,以壳聚糖作为表面活性剂,制备具有生物亲和性的水基Fe3O4磁流体.研究了Fe2+/Fe3+摩尔比、超声时间和表面活性剂用量对磁流体性能的影响.结果表明:当Fe2+/Fe3+摩尔比为1:1·5,滴加氨水时反应温度为70℃时,可制备理想纳米Fe3O4磁性颗粒;超声时间为7·5min左右,质量分数1%的壳聚糖溶液体积占FeO溶液总体积的50%时,有利于壳聚糖分子的包覆,使磁流体具有较高的比饱和磁化强度及稳定性.     

质酸金的合成及性质研究

为获得透明质酸新的功能,对其进行结构修饰.以氯金酸、透明质酸钠为原料合成质酸金.通过元素分析、冷场扫描电子显微镜、傅里叶变换红外光谱和核磁共振分析对其结构进行了表征,对肺癌细胞A549、肝癌细胞BEL7402增殖影响进行了研究.结果表明,在高剂量下对肝癌细胞BEL7402的增殖有明显的抑制活性,对肺癌细胞A549的增殖有边缘抑制活性.     

制备特定尺寸的纳米金颗粒方法及性能表征

通过化学还原法制备出不同粒径的纳米金颗粒。利用紫外可见分光光度计和透射电子显微镜对纳米金颗粒的形貌及尺寸进行表征。讨论了还原剂种类、还原剂用量、试剂加入顺序、反应温度等因素对纳米金颗粒稳定性、粒径、形貌和分散性的影响。结果表明：Na3C6H5O7为还原剂制得纳米金颗粒粒径在15-20 nm之间,NaBH4为还原剂制得的...