一种减小反射式0－π调相器尺寸的新方法

在微波频率低端，按常规方法研制的调相器尺寸是大的，该文采用金属化孔和改变调整元件，结果证明，在不降低性能指标的情况下，可以减小调相器的尺寸。     

HoBa2Cu3Ox的超导电性

通过交流磁化率和X-ray衍射分析，对用固态反应法制备的HoBa2Cu3Ox超导体的超导电性进行了研究．实验结果表明：随淬火温度的升高．由正交相(123相)向介于正交和四方相之间的过渡相变化；超导转变温度Tc(0)(零场下)从90K降到38．5K；交流磁化率虚部峰值温Tp(H)随附加直流磁场的增加而降低，Tp与Hdc之间的关系偏离[1一Tp(H)／丁(0)]∞H^2/3规律．     

氮－烃类二元低温混合工质的工作机理分析

用ＰＲ方程计算氮－烃类二元混合物的自由焓，提出判别氨－烃类二元混合物互溶性的方法，并计算了该类混合工质的汽液平衡、液液平衡和汽液液平衡特性，为寻求新的混合工质对提供了一种有效的理论预测方法。     

层流液柱吸收法测定气体在液相中的扩散系数

采用射流吸收的简捷方法，通过测定由Ｓｈｏｕｔｈｗｅｌｌ型孔板所产生的截面速度均匀的层流喷射液柱所吸收的气体量，由渗透理论所导出的模型，可计算出一定温度、压力下的微溶气体在液相中的分子扩散系数Ｄ。在温度为３０～４５℃的范围，测试结果与文献值吻合良好．     

Fabrication and Application of High Quality Diamond-coated Tools

Diamond-coated tools were fabricated using Co-cemented carbide inserts as substrates by the electronically aided hot filament chemical vapor deposition (EACVD). An amount of additive in an acid solution was used to promote the Co etching of the substrate surface. The surface of the WC-Co substrate was decarburized by microwave plasma with Ar-H 2 gas. Effect of the new substrate pretreatment on the adhesion of diamond films was investigated. A boron-doped solution was brushed on the tool surface to diffuse ...     

吸附树脂对对甲苯胺的静态吸附行为及其热力学性质的研究

对比 Amberlite XAD-4与两种新型吸附树脂 NK和新 H对对甲苯胺的静态吸附行为 ,根据吸附等温线研究并讨论吸附热力学性质 .两种新型吸附树脂对对甲苯胺的吸附能力明显强于 Amberlite XAD-4 ,微孔作用机制及表面部分极性起决定作用 .吸附焓变 ΔH<0表明吸附为放热过程 ,降低温度有利于吸附 .对吸附焓变和自由能变的讨论同时表明树脂对对甲苯胺的吸附为多层物理吸附过程 .吸附熵变 ΔS表明吸附树脂表面的不均匀性和吸附质分子在树脂表面的分布及其局域运动与吸附有密切关系 .     

现场获取声压－残余声强指数的方法

本文讨论了在现场获取声压－残余声强指数的技术，用实验验证了该技术具有予期的工程精度．     

员工职业生涯中期阶段的危机管理

职业生涯中期,是个人生命运行中任务最重,压力最大,也是最能取得事业成功的时期.由于身心特征发生很大变化,职业--家庭--自我事务之间关系难于平衡,往往会出现职业生涯的危机,因此,必须采取得力措施加以应对,才能走出困境,实现自己的职业目标.     

Analysis of Pyrolysates for Phenol Formaldehyde Resin by Py-GC/MS

Pyrolysis of phenol formaldehyde resin has been investigated by Pyrolysis Gas Chromatography-Mass Spectroscopy at the different temperatures from 500℃ to 750℃. Its composition of pyrclysates has been analyzed. Several compounds, especially benzene, toluene, p-xylene could only be formed above 500-550℃. Howerver, peak intensities for some pbend derivatives were decreased at the higher temperature. During pyrolysis, for thermo-setting phenol formaldehyde resins, polymeric chain scissions take place as a successive removal of the monomer units from the polymeric chain. The chain scissions are followed by secondary reactions, which leads to a variety of compounds. Addition reactions can also take place among the double-bond compounds during pyrolysis.