能耗率极值原理和重力理论交互作用下粗质颗粒的浓度垂线分布

本文同时运用能耗率极值原理和重力理论研究了固液两相流在粗质颗粒时固相浓度的垂线分布,通过探讨能耗率极值原理对“非单向性”作用问题,进一步揭示了两相流运动的机理。计算结果与实测数据有较好的吻合。其研究方法、原理、步骤也极易推广到其它各种粒径的固相。     

Selective protection of cells against X-irradiation. Isoproterenol protects only those cells that possesβ-adrenoreceptors

Summary In mixed culture of Chinese hamster fibroblatst, clone 431, and transformed murine L fibroblasts, clone B-82, isoproterenol was found to protect only 431 cells against ionizing radiation. It was shown that 431 cells, in contrast to B-82 cells, possess-adrenoreceptors, and the radioprotective effect of isoproterenol can be realized only if this agent interacts with-adrenoreceptors coupled with the cAMP system. Since malignization often causes the disappearance of-adrenergic and other hormone receptors, the combined culturing and irradiation of the cells studied can be regarded as a model of the growth of malignant cells (B-82) among normal tissue cells (431 cells) under conditions of radiation therapy. A possibility of selective protection against radiation damage of normal tissue cells, with retention of the former radiosensitivity of tumor cells, is discussed.     

考虑应力集中的吊车梁多轴疲劳寿命预测

钢结构吊车梁在工业建筑中被广泛应用,应力集中的存在导致几何不连续位置在复杂应力下服役.借助有限元法分析吊车梁应力-应变状态,确定危险点位置,并提取应力、应变分量;以应变能密度作为损伤参量并以最大平面为临界面,基于能量准则建立临界面位置数值计算方法,结合有限元结果给出吊车梁临界面位置;考虑吊车梁在非对称载荷下服役,借助Goodman方程进行平均应力修正,并结合Q355D钢近似S-N曲线计算疲劳寿命.该方法考虑了应力集中处多轴应力对疲劳损伤的影响,可以为复杂应力下几何不连续钢构件的疲劳寿命评估提供新方法.     

轧制带材的瓢曲生成路径

通过建立冷轧带材屈曲失稳后的大位移变形模型,计算出复杂模态的瓢曲浪形生成路径,它包含着实际可能出现的各种附加应力和位移约束条件．实验证明这是可行的板形控制目标理论,解决了高技术轧机的板形设定问题．     

钼对低合金钢硝酸盐体系应力腐蚀的影响

以高风温热风炉用钢的沿晶应力腐蚀开裂问题为背景,研究了Ｍｏ对低合金钢在硝酸盐溶液中的应力腐蚀行为。结果表明,低合金钢中加入合金元素将使钢中贝氏体和／或珠光体含量增大,从而提高了材料的稳定性和抗ＳＣＣ耐蚀性。提出了低合金钢／硝酸盐溶液体系的“温度－钼含量－ＳＣＣ图”。     

Energy flow and community structure in freshwater ecosystems

The goal of this article is twofold: 1) It aims at providing an overview on some major results obtained from energy flow studies in individuals, populations, and communities, and 2) it will also focus on major mechanisms explaining community structures. The basis for any biological community to survive and establish a certain population density is on the one hand energy fixation by primary producers together with adequate nutrient supply and the transfer of energy between trophic levels (bottom-up effect). On the other hand, predator pressures may strongly control prey population densities one or more trophic levels below (top-down effect). Other interpopulation effects include competition, chemical interactions and evolutionary genetic processes, which further interact and result in the specific structuring of any community with respect to species composition and population sizes.     

考虑横向变形的薄壁箱梁计算

在符拉索夫的虚功法的理论基础上,对符氏虚功方程进行扩充,讨论多箱带悬壁的薄壁箱梁在截面横向可变形及悬臂转动情况下,截面纵向、横向位移和应力计算方法。通过算例,分析虚功方程的计算结果。     

轴对称功能梯度材料设计模型

采用弹性力学,复合材料力学以及计算数学的有关理论,建立起了轴对称功能梯度材料分析模型,结合这类材料实际应用背景,给出了理论模型求解的边界条件,在求解梯度层层间热应力的过程中,引入了三角级数来描述功能梯度材料层间热应力,从而得到了层间热应力的精确解,以此优化这类材料的设计与实现该类材料的成功制备。     

盐胁迫下Na^＋,K^＋,Cl^—对碱蓬和玉米离子的吸收效应

用ＮａＣｌ、ＫＣｌ、ＮａＮＯ３和ＫＮＯ３处理碱蓬（Ｓｕａｅｄａｓａｌｓａ）和玉米（Ｚｅａｍａｙｓ）幼苗,发现ＮａＣｌ胁迫引起Ｋ＋、Ｃａ２＋、Ｍｇ２＋、Ｆｅ２＋、Ｚｎ２＋、ＮＯ－３等必需元素的含量降低．认为ＫＣｌ和ＫＮＯ３处理引起碱蓬幼苗幼叶黄化的主要原因是Ｎａ＋的缺乏;ＫＣｌ处理引起玉米和碱蓬幼苗的干枯死亡主要是由于植物体内高浓度Ｃｌ－引起的;Ｎａ＋是引起盐生植物碱蓬叶片肉质化的重要因子;Ｃｌ－是刺激碱蓬生长的重要因子     

双剪强度理论在水工压力隧洞弹塑性应力分析中的应用

水工压力隧洞的弹塑性分析,工程上一直采用Ｍｏｈｒ－Ｃｏｕｌｏｍｂ强度准则进行求解。但由于该理论和试验结果常常不符,故产生误差。本文应用俞茂宏教授提出的双剪强度理论对水工压力隧洞进行弹塑性分析,解决了上述问题。