壳聚糖改性微球制备及其在苯酚废水处理中的应用

在环已烷中采用反相悬浮法以戊二醛为交联剂制备壳聚糖(CTS)改性微球,通过SEM,IR初步检测CTS微球结构,研究了其对苯酚模拟废水的吸附性能,包括对不同苯酚浓度废水的吸附,以及时间、pH值等对微球吸附苯酚废水的影响等。结果表明:在实验条件为25℃,pH值为5时,微球在苯酚废水中吸附仅15 min达到平衡,符合Freundlich吸附等温方程,为物理吸附;CTS微球的溶胀性较小,耐酸碱性能增强,吸附性能优于CTS.     

Preparation, characterization and photodegradation of methylene blue based on TiO2 microparticles modified with thiophene substituents

The new microparticles,2-formylthiophene(FT)/TiO2 and(E)-1,2-bis(5-formyl-2-thienyl) ethylene(EBFTE)/TiO2 were synthesized with a silane coupling agent.The prepared TiO2 composites were characterized using Ultraviolet-Vis absorption(UV-Vis),X-ray diffraction(XRD),scanning electron microscope(SEM) and thermogravimetric analyzer(TGA).Methylene blue was used as a model material to examine the photocatalytic activities of the prepared catalysts under both Ultraviolet-Vis(UV) and visible(Vis) light.The enhanced photocatalytic activities were observed in the presence of(FT)/TiO2 and EBFTE/TiO2 under Vis light.It suggests that FT or EBFTE plays a block or active role in the photodegradation mechanisms under UV and Vis light irradiation,respectively.     

Thermal degradation of BaAl2Si2O8：Eu2＋ phosphor excited by near ultraviolet light

Eu2+ doped BaAl2Si2O8 phosphor was synthesized by one-step calcination of precursors that were prepared by chemical co-precipitation.The thermal degradation properties of BaAl2Si2O8:Eu2+ were investigated by photoluminescence,lifetime and chromaticity coordinate measurements.BaAl2Si2O8:Eu2+ is efficiently excited by incident light of 250-400 nm,which matches the emission of near ultraviolet LED chips well.BaAl2Si2O8:Eu2+ exhibits broad blue emission at 470 nm because of the 4f65d1-4f7(8S7/2) transition of Eu2+ ions,and the emission band shows an unusual blue shift with bandwidth broadening and emission intensity decreasing as the annealing temperature is increased.The luminescence decay and CIE chromaticity coordinates of BaAl2Si2O8:Eu2+ were determined to investigate its application in white LEDs.     

Degradation of the antibiotic sulfamonomethoxine sodium in aqueous solution by photo-Fenton oxidation

In this study, photo-Fenton oxidation was applied to degradation of sulfamonomethoxine sodium (SMMS) in aqueous solution. The operation parameters of pH, temperature, and concentrations of H2O2, Fe2+ and SMMS were investigated. The optimum conditions for the photo-Fenton process were determined as follows: [SMMS]=4.53 mg/L, pH 4.0, [H2O2]=0.49 mmol/L, [Fe2+]= 19.51 μmol/L and T=25°C. Under these conditions 98.5% of the SMMS degraded. The kinetics were also studied, and degradation of SMMS by the photo-Fenton process could be described by first-order kinetics. The apparent activation energy was calculated as 23.95 kJ/mol. Mineralization of the process was investigated by measuring the chemical oxygen demand (COD), and the COD decreased by 99% after 120 min. This process could be used as a pretreatment method for wastewater containing sulfamonomethoxine sodium.     

Catalytic oxidation of phenol in wastewater-A new application of the amorphous Fe78Si9B13 alloy

The amorphous Fe78Si9B13 alloy was used as a heterogeneous Fenton catalyst in the process of phenol degradation.The influences of main operating parameters such as reaction temperature,catalyst amount,hydrogen peroxide dosage and initial pH of solution on phenol degradation rate were investigated.The maximum mineralization of phenol was achieved at 60°C,6 g/L Fe78Si9B13, 0.31 mol/L hydrogen peroxide,with an initial pH of 2.5.More than 99%of phenol was completely removed under the optimum conditions within 10 min for a solution containing 1000 mg/L of phenol.Batch experiments for solutions containing phenol con- centrations ranging from 50 to 2000 mg/L were investigated under the above conditions and the same excellent degradation rate was obtained.The Fe78Si9B13 showed better catalytic activity than iron powder and Fe 2+ .Addition of n-butannol(hydroxyl radical scavenger)decreased the degradation rate of phenol,which demonstrates that hydroxyl radicals were mainly responsible for the removal of phenol.We demonstrated that phenol may be degraded by hydroxyl radicals decomposed by hydrogen peroxide on the surface of Fe78Si9B13 and illustrated the reaction mechanism for this process.This amorphous alloy exhibited high stability in recycling experiments and showed excellent reuse performance even after continuous operations of 8 cycles.     

壳聚糖分散多壁碳纳米管修饰电极半微分伏安法测定微量碘

将多壁碳纳米管超声溶解于壳聚糖中（MWCNT-CTS）,修饰于复合陶瓷碳电极表面,并研究了碘离子（I-）在该修饰电极上的电催化性能。在优化的实验条件下,峰电流与I-浓度在0.50～25.0μg·mL^-1范围内呈良好的线性关系,检出限0.20μg·mL^-1。对于I-含量为5.0μg·mL^-1的样品,11次测得峰电流的相对标准偏差为3.3%,平均加标回收率为93.2%。实验结果表明,MWCNT-CTS修饰电极制备简单、使用方便、选择性好,对I-具有良好的催化性能,将该修饰电极用于华素片中微量碘的测定,取得了满意的结果。     

基于金纳米棒/多壁碳纳米管-壳聚糖复合膜电极的肌红蛋白直接电化学和电催化研究

采用金纳米棒(AuNRs)/多壁碳纳米管-壳聚糖(MWCNTs-Chit)复合膜促进肌红蛋白在电极上的直接电子转移,并用于构建H2O2生物传感器.首先将金纳米棒固定到玻碳电极表面,然后把MWCNTs-Chit分散溶液和肌红蛋白(Mb)固载到玻碳电极上,得到MWCNTs-Chit/Mb/AuNRs复合膜电极.通过循环伏安法对膜电极进行表征,在pH=7.0磷酸缓冲溶液中,Mb表现出一对峰形良好且可逆的氧化还原峰,其中氧化峰和还原峰电位分别为-0.291 V、-0.235 V,式电位(Eθ’)为-0.263 V.与此同时还探讨了修饰电极的电催化活性,结果表明其对H2O2具有良好的电催化还原作用,可作为检测H2O2的生物传感器.传感器对H2O2的米氏常数为0.0494 mM,线性范围为5.0×10-5～5.0×10-3M(R=0.986 7,n=10),检测限为3.2×10-6M(信噪比为3).     

TiO2/N可见光光催化降解邻苯二甲酸二甲酯

采用氮掺杂的二氧化钛为催化剂,探索了可见光催化氧化降解邻苯二甲酸二甲酯(DMP)的研究.系统地考察了光催化降解反应中DMP的初始浓度、光照时间、催化剂的量、pH值等因素对邻苯二甲酸二甲酯(DMP)的降解效率及速率的影响;同时对其光降解动力学及光降解过程中的矿化程度进行了一定的分析.结果表明,只有在催化剂和光源同时存在的情况下,DMP才有比较好的降解效果.当DMP的初始浓度为10 mg/L时,在优化条件下,即光催化剂为量1 g/L,pH值为6.20时,在以500W氙灯下进行光照8h,其降解率可达到90%以上.此光催化降解反应过程符合一级反应动力学.     

固载蛋白类药物的壳聚糖基管式膜的制备及体外缓释性能研究

以壳聚糖为载体,牛血清白蛋白(BSA)为模型药物,配制一定浓度的壳聚糖/药物溶液,将该溶液涂渍在硅胶导尿管表面,成功制备了壳聚糖基管式膜材料.考察了不同pH条件下该材料对蛋白类药物的缓释性能,并初步探讨了缓释机理.结果表明,固载蛋白类药物的壳聚糖膜材料在三种不同pH介质中对BSA均有明显的缓释作用,且在中性介质中效果最好,缓释时间超过36h,BSA缓释总量达6.0mg.该载体生物相容性好,对缓解病人术后因导尿管留置引发的尿路感染及其它副作用具有潜在的应用前景.     

高效苯酚降解菌PDB1的筛选及降解特性研究

从一个焦化厂受污染土壤中分离获得一株具有高效降解苯酚能力的不动杆菌属细菌PDB1,以苯酚为唯一碳源和能源对该菌株降酚特性进行研究。结果表明:在初始苯酚浓度低于1 200 mg/L时,该菌株能够在60 h内完全降解苯酚;在更高苯酚浓度下,高浓度苯酚对菌株生长造成明显抑制,菌株降酚能力出现显著下降。对该菌株苯酚降解动力学过程进行模拟,苯酚降解符合基质抑制型的Haldane模型;当初始苯酚浓度低于144.56 mg/L时,苯酚比降解速率随苯酚浓度增大而增大;在苯酚浓度为144.56 mg/L时,得到最大比降解速率,苯酚浓度高于144.56 mg/L时,苯酚比降解速率逐渐下降。该菌株降解苯酚最适温度为25~40℃,p H为7.0~8.0,菌株具有良好的高盐分耐受性,能够耐受5%Na Cl浓度并取得良好降酚效果。