非水溶性光致聚合物在软片基底上的应用研究

本文将一种非水溶性光致聚合物涂布在软片基底上,用匹配液将其固定在玻璃片上用来拍摄反射式全息图,衍射效率高,得到很好的图象效果,并对软片全息图的拍摄条件和保存条件进行了研究.     

NiAl基复合材料的研究进展

为了提高NiAl合金强度，改善NiAl合金塑性，在制备NiAl复合材料时，用不同的制备方法在NiAl合金中加入增强剂，如陶瓷或金属颗粒、晶须、短纤维和长纤维等制成复合材料，以不同的增强剂为基础总结了NiAl基复合材料研究在制备、结构、性能及机理等方面的最新进展。     

FRP特种航空集装箱夹层板力学行为分析

研制FRP复合材料航空集装箱,以代替原有的钢质及铝合金集装箱,同时为进一步减轻集装箱质量,采用夹层结构设计集装箱各面板;运用复合材料经典层合理论,结合基尔霍夫(Kirchhoff G)薄板小挠度弯曲理论,对复合材料夹层板进行力学行为分析,得到夹层板的弯曲控制方程,并用莱维(Levy M)矩形板单三角级数解法进行数值求解,进而得到夹层板在给定条件下的弯曲挠度,从而提供了集装箱夹层板的设计依据.     

Preparation and properties of the SmOx/Rh(100) model surface

The preparation of SmOx/Rh(100) and CO adsorption on this model surface have been investigated with Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and temperature programmed desorption spectroscopy (TDS). The oxygen adsorption on the SmRh alloy surface leads to the aggregation of Sm on the surface. The thermal treatment of this oxidized surface induces the further agglomeration of SmOx on the Rh(100) surface. Compared with CO TDS on the clean Rh(100) surface, three additional CO desorption peaks can be observed at 176, 331 and 600 K on the SmOx/Rh(100) surface. The CO desorption peak at 176 K may originate from CO adsorbed on SmOx islands, while the appearance of the CO adsorption peaks at 331 and 600 K, depending on the oxidation state of Sm, is attributed to CO species located at the interface of SmOx/Rh(100).     

超微粒子－有机聚合物薄膜的研究

我们用离子团束－飞行时间质谱（ＩＣＢ－ＴｏＦＭＳ）系统制备了金（Ａｕ）超微粒子－聚乙烯（ＰＥ）薄膜和Ｃ＿（６０）－聚乙烯薄膜。用透射电子显微镜（ＴＥＭ）分析了所制备的样品。它们的结构是Ａｕ超徽粒子镶嵌在多晶的ＰＥ薄膜中，其中Ａｕ原子团呈球形，直径分布在２．０－５．０ｎｍ窄范围内，当沉积基底温度为９０℃时，Ａｕ原子团相互靠近，几乎连接起来，但仍保持原来大小。基底温度为１４０℃蒸积的Ｃ＿（６０）－ｐＥ薄膜具有晶态结构，其晶格常数为１．４５４ｎｍ。     

碳钢表面生成黄铁矿保护膜的研究

研究了碳钢表面在H_2S水溶液中,迅速生成黄铁矿保护膜的机理和工艺条件。用X光衍射和扫描电镜形貌观察确认,在Fe-H_2S-H_2O系中产生的各种硫化铁腐蚀产物的物相及其转化次序。实验结果指出,当反应温度高于100℃时,产生二硫化物S_2~(2-)离子,提高pH值,能降低溶解Fe~(2+)浓度,这是迅速生成黄铁矿的必要条件。     

化学气相沉积法制备光谱选择性碲膜

用化学气相沉积法制备碲薄膜,其步骤为：通过电化学方法制得碲化氢,碲化氢在室温下分解后在聚乙烯塑料箔上沉积得到碲薄膜.用傅里叶红外光谱仪、紫外/可见/近红外光谱仪、X射线衍射仪及扫描电镜表征碲薄膜的光学性能和结构.结果表明,化学气相沉积法在Mn-O覆盖的聚乙烯塑料箔上沉积得到的碲薄膜在大气窗口（8～13μm）光谱区域具有很高的透过率,同时能阻挡几乎所有的太阳光谱,表明碲薄膜是适用于辐射制冷装置的太阳光辐射屏蔽材料.     

铂钼合金零件冲裁模的制作分析及改进

以具体零件为例分析了铂钼合金采用复合模加工时的缺点，提出了具体的改进方案，并论述了改进后的级进模结构、工作过程及其优点。     

分子间作用力对制备含有机废弃之水泥浆体影响研究

研究以水泥处理固体有机物时，有机物对水泥水化的影响。以膜流模式说明水份在水泥浆体内传输的现象。水膜存在半干之水泥浆体，其厚度小于100nm，膜流由离分压所驱动，而离分压来自分子间作用力。膜拟结果发现，水泥浆体内局部位置可用以进行水化之水量为Q=-Aslv／6vπ。当有机物添加在水泥浆体内时，会影响Hamaker常数，Aslv因此可能使膜流不稳定或完全抑制膜流，因而使水泥浆体内局部缺水，影响水化进行，造成成品强度降低，影响品质。     

Simulation of the diffusion process in composite porous media by random walks

A new random-walk interpolation scheme was developed to simulate solute transport through composite porous media with different porosities as well as different diffusivities. The significant influences of the abrupt variations of porosity and diffusivity on solute transport were simulated by tracking random walkers through a linear interpolation domain across the heterogeneity interface. The displacements of the random walkers within the interpolation region were obtained explicitly by establishing the equivalence between the Fokker-Planck equation and the advection-dispersion equation. Applications indicate that the random-walk interpolation method can simulate one- and two-dimensional, 2nd-order diffusion processes in composite media without local mass conservation errors. In addition, both the theoretical derivations and the numerical simulations show that the drift and dispersion of particles depend on the type of Markov process selected to reflect the dynamics of random walkers. If the nonlinear Langevin equation is used, the gradient of porosity and the gradient of diffusivity strongly affect the drift displacement of particles. Therefore, random-walking particles driven by the gradient of porosity, the gradient of diffusivity, and the random diffusion, can imitate the transport of solute under only pure diffusion in composite porous media containing abrupt variations of porosity and diffusivity.