Fe3O4/聚(丙烯酸甲酯-二乙烯苯)微球对金属离子的吸附

通过悬浮聚合制备Fe3O4/聚(丙烯酸甲酯-二乙烯苯)磁性微球,考察了微球对金属离子的吸附性能。结果表明,磁性吸附剂粒径35～55μm,Fe3O4质量分数18%,能有效吸附金属离子。由Langmuir模型得到的饱和吸附容量为别为:Hg2 2.3mmol/g,Cu2 2.2mmol/g,Ni2 1.1mmol/g。由Lagergrent方程计算的吸附速率常数分别为:Hg2 0.023min-1,Cu2 0.034min-1,Ni2 0.036min-1。吸附剂可用1mol/LH2SO4再生。     

Fe(OH)3胶体电泳实验的两则改进

Fe(OH)3胶体电泳实验最大的问题在于胶体纯化时间太长，利用电渗析法代替传统渗析法来纯化Fe(OH)3胶体，大大缩短了纯化时间和节省了蒸馏水。另外，在拉比诺维奇－付其曼U型电泳仪^[1]的基础上加以改进，使之更加合理。     

MIL-101(Fe)对草甘膦的吸附行为研究

采用溶剂热法制备MIL-101(Fe)用作吸附材料,借助XRD、SEM、XPS及氮气吸脱附测试对所制材料的形貌及结构进行表征,研究了溶液pH值、反应时间、溶液浓度以及温度对其吸附草甘膦行为的影响。结果表明,当pH为3时,MIL-101(Fe)对草甘膦的吸附效果最佳,且随着温度的升高,MIL-101(Fe)对草甘膦的吸附速率明显增加,吸附过程符合拟二级动力学,等温吸附实验数据符合Langmuir和Temkin模型。MIL-101(Fe)吸附草甘膦属自发吸热的化学吸附反应,MIL-101(Fe)的中心金属Fe与草甘膦中O的配位在吸附过程中起主要作用。     

A novel Fe/HNT visible light-driven heterogeneous photocatalyst: Development as a semiconductor and photocatalytic application

Fe/HNT (Iron/Halloysite-nanotube) heterogeneous semiconductor catalysts operating effectively under visible light were developed by using FeCl₃, FeSO₄ and Fe(OH)₃ sludge precipitated after electro-Fenton process and named as Fe/HNT-I, Fe/HNT-II and Fe/HNT-III, respectively. Chemical configuration and particle morphology of the catalysts were characterized with XRD, SEM-EDS and UV–vis DRS. Effect of the developed Fe/HNT photocatalysts was investigated for the degradation of Reactive Orange 16 (RO16) textile dye under visible light. The photocatalytic decolorization of RO16 was 95.6%, 99.3% and 96.6%, respectively. It was found that the photocatalytic performance of Fe/HNT-III catalyst under visible light was effective compared to Fe/HNT-I and Fe/HNT-II. The iron ratio in the catalyst's structure (Fe:HNT ratio 0.25, 0.5 and 0.75 (w/w)) and pH value (4, 7 and 9) in production phase were also changed to investigate the photocatalytic effect of Fe/HNT-III. An Fe:HNT ratio of 0.25 and a pH of 4 were determined as the optimum conditions for catalyst production. Optimum H₂O₂ dosage value was also investigated for photocatalytic oxidation process and determined to be 10 ?mM. Finally, the optimum conditions were further used for the degradation of Terbinafine hydrochloride (TerHCl) active drug and the treatment of wastewater from the textile and pharmaceutical industries.     

Effect of Zr addition on the stability of precipitated Laves phase and mechanical properties of Fe–Cr–Al-based alloys at high temperatures

The effect of a small amount of Zr addition on the temperature-dependent stability of Laves phase particles and mechanical properties of Fe-13.5Cr-4.73Al-2.07Mo-(0.34–0.5)Nb-(0.65–0.98)Ta-(0–0.33)Zr (wt. %) ferritic alloys was investigated in the present study. The designed alloy ingots were hot-rolled, aged at 1073 ?K for 24 ?h, and then re-treated at 1273 ?K, 1323 ?K, 1373 ?K, and 1473 ?K for 1 ?h, respectively. It was found that the Zr addition could not only stabilize the Fe₂M Laves phase (M ?= ?Mo,Nb,Ta,Zr) to a much higher temperature, but also induce the formation of stable Fe₂₃Zr₆ phase. The high-temperature (HT) microstructural stability of the alloys significantly was improved, as evidenced by the fact that a certain amount (0.66–1.19%) of precipitates (Fe₂M, Fe₂₃Zr₆, and core(Fe₂₃Zr₆)-shell(Fe₂M)-structured particles) with an appropriate size (～1.0 ?μm) uniformly distributed in the ferritic matrix even after being re-treated at 1473 ?K. Particularly, the formation of core-shell-structured particles at HTs was studied from the viewpoint of both solid solubility and diffusion coefficient of M in the matrix. All these aged alloys exhibited prominent mechanical properties at both room and elevated temperatures, showing high yield strength with σ_YS ?= ?490–560 ?MPa at room-temperature and σ_YS ?= ?80–85 ?MPa at 1073 ?K. The strengthening effect was further discussed in light of various strengthening mechanisms, and the calculated strength are in good agreement with the experimental results.     

化学氧化-沉淀法对某酸性矿山废水中铁的资源化回收处理工艺

采用化学氧化-沉淀法处理某Fe²⁺浓度为800 mg/L的高酸度矿山废水,通过研究不同碱性试剂的添加对调节pH和对铁去除效果的影响以及曝气氧化时间、絮凝剂添加量等方面对废水中铁氧化沉淀效率的探究。结果表明:当使用质量分数为20%的石灰乳调节废水pH至8.0,曝气氧化2 h时,废水中铁的去除率达到99.99%,其废水上清液中TFe的残余质量浓度为0.8 mg/L。再向处理后的废水中加入0.5 mL/L质量浓度为0.1%聚丙烯酰胺使含铁沉淀絮凝沉降,过滤沉淀并烘干后得到铁品位约为40%的沉淀渣,可以作为制备聚合硫酸亚铁的原料。再将沉淀渣在管式炉中700 ℃条件下焙烧30 min得到铁品位约为60%产品,可以作为炼铁的原材料。     

一种理想的固体无机化合物制备方法--前驱物固相反应法及其应用举例

介绍了一种高效率、低能耗、易操作的固体无机化合物制备方法——前驱物固相反应法及其广阔的应用前景,并通过自己设计的两个实验(ZnFe2O4和 Fe2O3的制备及表征)来证明此方法的可行性。     

Effect of Nano-SiC and Nano-Si Doping on Critical Current Density of MgB_2

The discovery of superconductivity in magnesium diboride (MgB2) has opened up a new field in materials science research. It offers a possibility of a new class of high performance superconducting materials for practical applications because of the relatively low cost of fabrication, high critical current densities (Jc) and fields, large coherence length, absence of weak links, higher Tc(TC = 39K) compared with Nb3Sn and Nb-Ti alloys (two or four times that of Nb,,Sn and Nb-Ti alloys). However, the weak flux pinning in the magnetic field remains a major challenge. This paper reports the most interesting results on nanomaterial (SiC and Si) doping in magnesium diboride. The high density of nano-scale defects introduced by doping is responsible for the enhanced pinning. The fabrication method, critical current density, microstructures, flux pinning and cost for magnesium diboride bulks, wires and tapes are also discussed. It is believed that high performance SiC doped MgB2 will have a great potential for m