扰动对天敌有多食性模型稳定性的影响

本文主要讨论了扰动对天敌具有多食性模型 x_1=x_1(r_1-a_1y), x_2=x_2(r_2-a_2y), y=y(-r_3+b_1x_1+b_2x_2)稳定性的影响。利用Liapunov函数得到了昆虫种类内部的密度制约,将促使昆虫与天敌系统进一步稳定化,进而得出同一食饵水平上的竞争是不稳定化的结论。其中后一种情况与J.M,Smith的结论完全一致。     

兰州二热N(c)100-90/535型机组供热抽汽压力低的探讨

本文对N(c) 10 0 - 90 /5 35型热电联产机组供热抽汽压力低 ,造成高压缸末级隔板过负荷 ,对机组安全运行形成威胁做了简单的分析 ;并对该类型机组的相关问题作了讨论 ,可供同类型机组借鉴     

普通及数控车床教学中对强化车刀参数的理解

车刀强度高低不仅影响刀具使用寿命,而且还影响工件加工质量和生产效率。在教学中发现有部分技校学生（尤其是中级工学生）对如何提高刀具强度、延长刀具寿命认识不足。本文介绍采用负倒棱和过渡刃的方法来提高刀具强度,学生容易接受,收到较好效果。     

框架结构中不同强度等级混凝土的施工

本文针对框架结构中不同强度等级混凝土的施工,结合具体实例,阐述了混凝土施工中控制和消除梁柱节点处裂缝的具体措施。     

A Novel Polymethyl Methacrylate （PMMA）TiO2 Nanocomposite and Its Thermal and Photic Stability

A new kind of polymethyl methacrylate （PMMA）-TiO2 nanocomposite was synthesized through polymerization. The thermal and photic stability of this PMMA TiO2 nanocomposites were investigated. The as prepared samples were characterized by scanning electron microscopy （SEM）, UV-Vis spectroscopy, differential thermal analysis （DTA） and the photo-induced weight loss, The results show that the photostability of the PMMA-TiO2 nanocomposite is higher than that of the pure PMMA under UV-light irradiation, The weight loss of the pure PMMA reaches 30 % after 300 h UVirradiation, while the composite only 0.3% under the identical experimental condition. The glass transition temperature （TR） of pure PMMA is only 80℃, while the Tg of the composite reaches 258℃. Compared with pure PMMA, the thermal stability of the composite is greatly enhanced.     

有限元理论在灯泡贯流式水轮机主轴强度分析的应用

贯流式水轮发电机组是水电厂中最重要的动力设备。应用有限元理论和优化设计思想并结合大型工程分析软件进行贯流式水发电机组的设计具有重要的意义。本文运用有限单元法结合大型工程分析软件ANSYS对灯泡贯流式水轮发电机组的关键部件之一主轴进行了静力强度分析。     

PEAK COVARIANCE STABILITY OF A RANDOM RICCATI EQUATION ARISING FROM KALMAN FILTERING WITH OBSERVATION LOSSES

We consider the stability of a random Riccati equation with a Markovian binary jump coefficient. More specifically, we are concerned with the boundedness of the solution of a random Riccati difference equation arising from Kalman filtering with measurement losses. A sufficient condition for the peak covariance stability is obtained which has a simpler form and is shown to be less conservative in some cases than a very recent result in existing literature. Furthermore, we show that a known sufficient condition is also necessary when the observability index equals one.     

某重型自卸车制动性能分析

文章以HFC32XXXX1重型自卸车为分析对象,建立了三轴汽车的制动力学模型,对其在空载、满载和超载情况下的前、后制动力矩,制动力分配和制动效能进行理论分析和模拟计算;结合平板试验台的试验结果,根据有关标准和ECE法规要求,评价了其在不同载荷情况下的制动性。     

粉刷层空鼓的力学分析及预防措施

介绍了产生粉刷层空鼓原因，探讨粉刷层空鼓的预防措施。