宜宾热源公司热电厂锅炉补给水处理工艺改造

分析了宜宾热源公司热电厂锅炉给水处理工艺的问题，指出因为原采用二级钠离子软化工艺水质不达标，造成频繁爆管，严重影响生产的不良后果．介绍了技术改造措施及效果：在原工艺基础上引入复床，将给水硬度控制在2．0μmol／L以下，碱度、氯根及电导率电得到控制，系统运行将近一年，水质稳定，锅炉运行正常安全，不仅消除了以前的生产隐患，而且节约了大量运行成本．     

分子筛负载HPA/TiO2催化剂的性能

报道了分子筛负载杂多酸和二氧化钛催化剂MS／HPA／TiO2的制备及其对品红溶液降解的效果，系统研究了催化品红溶液降解的优化条件。实验表明，MS／HPA／TiO2具有良好的催化活性且容易回收。当MS：HPA：TiO2=1：10：1，品红的浓度为0．005％（10mL），催化剂的用量为10mg，反应时间为10min，品红的降解率达到96．87％。     

Liquid-Liquid Equilibrium for 1-Butanol-Water-KF and 1-Butanol-Water-K2CO3 Systems

KF or K2CO3 was added into the 1-butanol-water system and two phases were formed： water-rich phase （water phase） and 1-butanol-rich phase （1-butanol phase）. The liquid liquid equilibrium （LLE） data for 1-butanol-water-KF and 1-butanol-water-K2CO3 systems were measured at 25℃ and showed that 1-butanol phase contained negligible salt and water phase contained negligible 1-butanol when the concentrations of KF and K2CO3 in the water phase were equal to or higher than 27.11% and 31.68% , respectively. Thus water could be separated efficiently from 1-butanol-water by adding KF or K2CO3 into the system. A theoretical calculation of LLE data was calculated by using the Pitzer theory to get water activity in the water phase, and by the models, such as the Wilson, NRTL or the UNIQUAC for the 1-butanol phase. For 1-hutanol-water-KF system, the experimental data were found in good agreement with the calculated results by using Pitzer theory and Wilson equa tion, while for 1-butanol-water-K2CO3 system, the experimental data were found in good agreement with the calculated results by using Pitzer theory and UNIQUAC eauation.     

一个七号信令鉴权系统的设计与实现

七号信令鉴权系统是针对于通信用户在不同的通信网间的使用权限的鉴别系统.本方案所设计的鉴权系统是依照有关通信行业技术标准而制定的,它能够充分地体现现代通信领域的发展趋势,同时也为广大的通信用户提供了必要的网间通信的鉴权手段.     

Expression and Characterization of HGV E2 cDNA in Pichia pastoris

A 559 base pair fragment of cDNA locating at the putative E2 region of GBV-C/HGV was in-serted into Pichia pastoris expression vector pPICgK in the reading frame of α-factor secreting signal pep-tide. The recombinant expression plasmid pPIC9K-E2 was introduced into P. pastoris GSll5 with electro-poration and recombined with the host genome by homological recombination. The His+Mut+ recombinantyeasts were selected and cultivated in the BMMY medium. After 3 days induction with 0. 5% methanol,the target protein(E2) accumulated up to 30% of total proteins in the supernatant. The expressed E2 pro-tein was proved possessing antigenicity and high specificity with Western blot and ELISA probed with serafrom the immunized rabbits and the patients infected by GBV-C/HGV.     

纤维双相钢的组织形成及对性能的影响

研究了纤维双相15Mn2Nb钢组织的形成及对性能的影响.结果表明,纤维双相钢具有优异的强塑性匹配,是一种天然的复合材料.其纤维组织的获取主要取决于合金化和热处理工艺规程,而合金元素Nb阻碍铁素体再结晶是形成纤维组织的关键.     

电化学沉积Cu-In-Se薄膜

采用电化学沉积方法在钼箔上制备Cu-Se、In-Se和Cu-In-Se薄膜,对电沉积的工艺参数进行了测试,发现Cu-In-Se是一种诱导共沉积,虽然沉积膜不具备化学计量比,但具有一定的光电性能.     

基于方阱模型计算液体的导热率

为了满足工程上对液体导热率的要求,在方阱模型基础上提出了计算液体导热率的方程。所得的导热率计算方程包括分子平动贡献项和分子内部能量贡献项。为了计算方便,根据分子模拟数据提出了计算中所需的方阱流体的径向分布函数的关联式。物质的能量参数由其临界温度估算,而硬壳体积则由基团贡献法获得。考虑到实际液体有别于方阱流体,在实际液体导热率计算中引入了一个与密度有关的校正参数。使用该文提出的方法,对液体氩及10种液态烃类物质的导热率进行了计算,其计算的平均相对误差小于5.3%。     

纳米二氧化锆制备工艺的研究

实验用氨水作沉淀剂,与氯氧化锆在常温条件下进行液相沉淀反应,制备纳米二氧化锆.实验优化出制备纳米二氧化锆的最佳工艺条件:反应物氨水和氯氧化锆的摩尔比为2:1;分散剂浓度为2g/L;焙烧温度为750℃;氨水浓度0.2mol/L;氯氧化锆浓度0.1mol/L,在此条件下可获得较为分散均匀的纳米二氧化锆.     

管流与环缝入流的管内合流特性──等温浓度场与紊流特性实验研究

在对管流与环缝入流的管内合流特性完成等温速度场实验研究的基础上，以对应一致的实验条件，实测了时均浓度分布，紊流正应力和紊流切应力分布．结果证明：浓度分布有与速度分布相一致的变化趋势和规律，但合流后截面上浓度均匀化比速度均匀化慢；合流动量相交产生附加雷诺应力，并决定合流后速度分布和浓度分布的均匀化进程．为建立系统的化学反应流动规律提供基础．