SnAgCu合金粉末的真空蒸镀涂层机理

对SnAgCu合金粉末的真空蒸镀涂层硬脂酸的成膜机理进行了研究.采用扫描电镜(SEM)和透射电镜(TEM)对涂覆后合金粉末的形貌及结构进行观测,采用傅里叶红外光谱仪(FTIR)和X射线光电子能谱仪(XPS)对涂覆后粉末的透射吸收谱和光电子能量进行测试.结果表明:硬脂酸在合金粉末表面形成一层均匀致密、厚度为5～10 nm的薄膜,硬脂酸涂层SnAgCu合金粉末的行为属于物理吸附行为,其生长方式遵循岛状生长机理模式,其过程实质是一个气--固转换、晶体生长的过程.     

基于PSO-RBF神经网络模型的原水水质评价方法及应用

针对自来水生产过程的原水水质评价问题,提出了一种基于PSO-RBF神经网络模型的原水水质评价方法.首先,根据水厂生产经验和历史数据分析,制定面向自来水生产过程的原水水质评价标准.然后,采用粒子群优化(PSO)算法训练的RBF神经网络模型,对苏州市相城水厂的进厂原水水质实施在线评价.最后,将进厂原水水质在线评价结果作为前...     

超声乳化法制备纳米Fe3O4磁性颗粒及壳聚糖表面改性

采用超声乳化法制备纳米Fe3O4磁性颗粒,以壳聚糖作为表面活性剂,制备具有生物亲和性的水基Fe3O4磁流体.研究了Fe2+/Fe3+摩尔比、超声时间和表面活性剂用量对磁流体性能的影响.结果表明:当Fe2+/Fe3+摩尔比为1:1·5,滴加氨水时反应温度为70℃时,可制备理想纳米Fe3O4磁性颗粒;超声时间为7·5min左右,质量分数1%的壳聚糖溶液体积占FeO溶液总体积的50%时,有利于壳聚糖分子的包覆,使磁流体具有较高的比饱和磁化强度及稳定性.     

Preparation of three-dimensionally ordered macroporous perovskite materials

In this paper,we use La0.8Sr0.2MnO3 and La0.7Ca0.2Sr0.1MnO3 as examples to demonstrate a preparation method for threedimensionally ordered macroporous(3DOM) perovskite thermochromic materials.Polystyrene spheres with an average diameter of 220 nm were self-assembled into a three-dimensionally ordered colloidal crystal template.A mixed metal nitrate solution prepared using La(NO3) 3·6H2O,Ca(NO3) 2·4H2O,Sr(NO3) 2,Mn(CH3COO) 2·4H2O and an ethanol precursor was used to fill the interstitial voids of the polystyrene colloidal crystal templates.3DOM La0.8Sr0.2MnO3 and La0.7Ca0.2Sr0.1MnO3 materials were then obtained after the sphere templates were removed via drying and calcination.The results show that the framework of the 3DOM materials can have different thicknesses and pore shrinkage rates by varying the filling times.In addition,the Curie temperatures of the 3DOM and bulk La0.8Sr0.2MnO3 materials can be varied by altering the preparation method.     

LiMn2O4单晶的充放电性能

为进行尖晶石LiMn2O4的改性优化,合成了大小为100~400 nm,呈八面体形貌的LiMn2O4尖晶石单晶,并采用XRD、SEMI、CP等方法进行了分析,旨在对该尖晶石单晶的充、放电性能进行表征.     

分散液液微萃取在酸性模拟体系中塑料包装材料PAEs的溶出应用

将分散液液微萃取(DLLME)与气相色谱-氢火焰离子化检测器(GC-FID)技术相结合,建立了一种简单快速测定塑料包装材料在酸性模拟体系(体积分数为3%乙酸水溶液)中6种邻苯二甲酸酯(PAEs)溶出量的方法.采用四氯化碳作萃取荆,乙腈为分散剂,在优化条件下,6种PAEs在1.0～100.0μg/L质量浓度内呈良好的线性...     

浅谈建筑材料的检测及其影响因素

工程质量是永恒的主题。建材检测是建筑工程质量保证体系中的一个重要环节,是确保建筑工程质量的先决条件。文章在此主要分析常用建材质量检测方法、常用建材检测项目、建筑材料检测取样、建材检测的影响因素及数据处理,以供参考。     

基于MEMS的压电厚膜谐振梁能量收集器的研究

在谐振梁能量收集器中PZT膜材料的制备起着至关重要的作用,复合结构的锆钛酸铅(PZT)厚膜采用溶胶-凝胶方法旋涂在硅基的Au/Cr/SiO2/Si结构衬底的制备方法,主要因为溶胶-凝胶制备方法简单,成本低适合于集成制作.改进PZT组分和和0-3混合法及复合结构的Au/Cr/SiO2/Si衬底,使制备的PZT厚膜避免了厚...     

The effect of nanohybrid materials on the pour-point and viscosity depressing of waxy crude oil

The pipeline transportation of waxy crude oil is a problem both at home and abroad.In this paper,a novel nanohybrid pour-point depressant (PPD) was used to decrease the pour point and viscosity of waxy crude oil.The pour point and apparent viscosity of waxy crude oil was decreased significantly upon addition of the nanohybrid PPD,and the long-term stability of the nanohybrid PPD was superior to that of a conventional ethylene-vinyl acetate copolymer PPD.Polarized optical microscopy and X-ray diffraction were used to study the effect of the nanohybrid PPD on the crystallization of crude oil.Addition of the nanohybrid PPD reduced the amount of wax crystals,prevented their aggregation,and reduced the temperature at which the crude oil started to crystallize.The significant effect of this nanohybrid PPD on the pour point and viscosity depressing of crude oil is of great importance for facilitating the safe,efficient and energy-minimized transportation of waxy crude oil.     

基于F&EI的新兴有机材料生产过程风险分析

新兴民营企业在运营流程中采取行政安全一手抓的管理模式,在新型有机材料生产和加工的过程中出现诸多新的安全问题.为规避此类问题带来的事故风险,以浙江某新兴材料企业为例,通过实地调研、定性分析和定量评估相结合的方法,对其物料、工艺、设备及维护过程中的危险源及有害因素进行风险分析.基于现场勘察获得引起生产加工过程中危险物质泄漏...