抛物问题的一类变网格矩形有限元方法

传统有限元方法要求区域剖分满足正则性条件.对一类抛物问题,首先可利用相应的矩形元,绕开区域剖分中正则性条件的限制,再结合变网格思想,导出所讨论问题的全离散有限元格式;其次,利用Riesz投影算子,通过一些新的技巧和方法,得到与传统有限元相同的最优误差估计.     

用于频率域航空电磁数据的二维自动调平

研究了频率域航空电磁数据的自动调平问题.提出了一种基于一维、二维滤波处理的二维自动调平算法.零漂具有随机性且一般变化缓慢,二维滤波处理可从航电数据中求出包含局部异常和零漂的中间结果,一维滤波处理能从中间结果中求出零漂主要成分,二者结合就能从航电数据中除去大部分零漂误差.该算法只需输入简单的处理参数,实际数据处理结果表明它比以往的调平方法计算速度快、调平效果好、人为因素对结果的影响小,可有效除去零漂造成的"窗帘效应",提高视电阻率和平面剖面图质量.二维自动调平算法为频率域航空电磁数据的零漂调平提供了新的处理手段.     

动态目标跟踪与自动特写快照系统的设计及实现

针对现有动态跟踪和快照系统难以同时满足清晰、可靠、实时、准确的跟踪抓拍要求的缺点,提出了一种复杂度较低的新型实用动态跟踪和快照系统.采用一种快速的混合高斯背景差分法分割出运动目标,并使用投影法实现目标的精确定位;然后采用Kalman滤波与模板匹配的方法,结合摄像机标定结果进行云台控制实现动态跟踪;同时,在PTZ跟踪过程...     

任意方向运动多层介质中电磁波的传播特征

利用Lorentz变换矩阵和运动各向同性均匀介质中电磁场量间的关系及边界条件,详细推导了,当多层介质沿任意方向运动时,入射波在运动系下,在静止参考系中其多层介质界面上电磁波场量传播特征的矩阵递关系和波矢量的变化关系.     

痕量PBBs/PBDEsGC/MS分析法中PCB及其衍生物干扰消除方法

电子电气产品中痕量阻燃剂聚溴联苯/聚溴联苯醚(PBBs/PBDEs)的检测通常采用气相色谱/质谱(GC-MS)联用法,但该法是建立在持久性污染物多氯化苯/多氯化萘(PCBs/PCNs)基础上,因此此类物质干扰不可避免。为了解决此类问题,提出了2种解决方法:1)阴离子化学电离-气相色谱/质谱联用法(GC/MS-NICI)和电子轰击-气相色谱/质谱联用法(GC/MS-EI)联合使用;2)以YMC ODS-C18为载体,基质固相分散法(MSPD)吸附分离。结果显示,前者可以同时洞察聚溴联苯和联苯醚的分子链断裂后阴离子碎片[Br]-,[HBr2]-和分子链段碎片[M+2]+,[M+4]+,[M+6]+,[M+8]+的滞留峰,增加了对溴系阻燃剂的选择性。后者可以有效分离多种多氯化苯与聚溴联苯醚的色谱峰,这为溴系阻燃剂气相色谱/质谱联用分析法中多氯化苯及其衍生物干扰提供了新的解决方法。采用此方法对8类电子电气产品中10种聚溴联苯醚和多氯化苯进行加标回收实验及精密度分析,回收率在60%～98%,相对误差在9.5%以内,符合国际电工委员会(IEC)对溴系阻燃剂检测精度要求,说明方法具有较高的可靠性,也为我国电子电气业更好遵守...     

同位素内标法对水产品中硝基呋喃代谢物液相色谱-串联质谱法测定

建立了水产品中硝基呋喃类代谢物残留量的同位素内标定量液相色谱-串联质谱法测定。样品经稀盐酸水解,邻硝基苯甲醛衍生,乙酸乙酯提取净化后,用液相色谱-串联质谱法通过正离子扫描多反应监测模式检测,稳定同位素内标定量。本方法的线性范围为1.25～10μg/kg,4种硝基呋喃代谢物的线性相关系数均在0.993 2以上,4种化合物...     

Potential release of hydrogen fluoride from domestic coal in endemic fluorosis area in Guizhou,China

Almost half of the total rural area of Guizhou Province and many regions within the 11 adjacent provinces in southwestern China have a long history(at least 70 years) of endemic fluorosis,including dental fluorosis and osteofluorosis along with its associated deformities and disabilities.Over decades of research,this specific type of endemic fluorosis has been defined as coal-burning fluorosis,which is distinct from drinking-water fluorosis.It is generally acknowledged that indoor burning and combustion of high-fluorine coal leads to food contamination,and fluorine then enters the human body.However,the exact chemical form of fluorine during its release and transfer to the body is still unknown.In the present study,21 domestic coal samples from outcrop and semi-outcrop coal collected in five villages with fluorosis were analyzed by time-of-flight secondary ion mass spectrometry(TOF-SIMS).The total mass fraction of sulfur in the samples ranged from 0.24%-5.58% and total fluorine content ranged 90.2-149.2 mg/kg.H3O+,H2SO4+ and HSO4-were detected in the samples by TOF-SIMS,which indicated that sulfuric acid hydrate(H2SO4.H2O) was present in the samples.F-was detected in all of these,which suggested the samples contain ionic fluorine compounds.Under certain circumstances,such as heating or burning,the prevalence and coexistence of the acid(H2SO4.H2O) and base(F-) would lead to a neutralization reaction producing volatile hydrogen fluoride(HF,bp = 19.5℃).This would be the chemical form of fluorine released from the coal.Further studies using HF and SO2 test tubes on headspace gas over coal samples heated to 200℃ in the laboratory and on headspace gas over stoves or chimney tops at rural residences confirmed the release of HF.     

Changes in physical features of Glacier No. 1 of the Tianshan Mountains in response to climate change

This study analyzes the changes in glacier zones and snow composition of Glacier No.1 in the Tianshan Mountains of China since 1961,and their possible relations with climate.It is found that precipitation dominated the snow composition and that air temperature and precipitation controlled the distribution of glacier zones,but interannual change in precipitation had a relatively large effect on glacier zones and snow composition during 1963–1981 (P10) and 1963–1989 (P11).However,during 1982–2007 (P20) and 19...     

流量比对气膜冷却叶片表面换热系数的影响

为深入了解某型涡轮叶栅进口导叶叶片的换热规律,采用瞬态液晶技术测量了无气膜孔叶片和带气膜孔叶片在不同流量比下的表面换热系数,通过对比分析,研究了气膜出流和流量比变化对叶片表面换热的影响.实验中叶栅通道来流雷诺数为108 000,叶片气膜出流与叶栅通道来流的质量流量比为0、3.46%、4.61%、5.77%、6.93%、8.08%、9.23%.实验测量获得了无气膜叶片中截面的压力分布曲线,以及各流量比下叶片表面的换热系数分布云图及其平均值线图.研究结果表明:叶片吸力面存在气流流动分离;气膜出流使得分离点位置提前,并且缩短了分离再附着的过渡区域;气膜出流使叶片前缘、压力面和吸力面气膜孔区域的换热系数大幅升高,但对吸力面分离点后区域的换热影响不大;在实验工况范围内,气膜出流流量比越大,换热系数越高.     

面向客流仿真的轨道交通车站图形建模方法

分析了城市轨道交通车站空间结构和设施设备特点,将其划分为车站-楼层-区域-设备的逻辑层次结构;利用面向对象(object oriented)建模技术,提出了一套简洁而灵活的方法:通过3种几何线型类和4种设施设备基元类,以组合的方式构建车站所有设施设备模型,进而构建整个车站的空间结构模型.此方法不但能够利用现有AutoCAD工程图精确而快捷地建立客流仿真地图,并且能够以矢量图形的方式实时显示仿真过程.