基于二分法迭代的频谱感知节能优化策略

针对认知无线电(CR)系统中频谱感知技术能量效率低的问题,提出了一种基于二分法迭代寻优的联合优化算法。该算法通过联合传输功率与感知时隙进行优化,最大化地提高了CR系统的能量效率,并且在针对优化参数ξ的寻优过程中,使用了二分法与迭代算法结合的寻优方法。通过理论分析,与其他类似算法相比,该算法的寻优速度更快,算法复杂度更低,函数收敛速度更快,实际应用的可扩展性更强。数值仿真分析结果表明,在保证检测性能的前提下,提出的算法能够很好地解决能效的最优化问题,在恒定检测概率Pd=0.9和Pd=0.7条件下,所提出算法的能耗开销均低于其他算法,在系统吞吐量中所提出算法均优于其他算法,为CR系统的发展提供了理论支撑,更加符合未来CR系统的节能发展方向。     

广西建筑节能的初步探讨

从建筑节能的含义人手,结合广西的地理位置和气候特点以及国内外建筑节能发展的实践经验,对广西建筑节能的发展现状及其原因进行思考分析,探讨性地提出广西推进建筑节能的管理对策、规划与建筑设计对策、有待加强和改进的技术方面.     

《计算机组成原理》（运算器）多媒体模拟实验教学

介绍如何应用计算机设计《计算机组成原理》的实验教学，应用C 编写功能函数来模拟各种芯片的工作，使同学们在学习中更直观的了解芯片的工作。所介绍的程序是对运算功能发生器(74LS181)的模拟编程，完成32种算术逻辑运算实验。     

浅谈灾害管理系统构建中的几个问题

目前大多数灾害管理系统均以GIS系统建立工作平台,为决策部门提供可靠依据,这在很大程度上促进了一个地区减灾力的提高。但是,由于GIS系统在我国的开发利用还没有达到一个十分成熟的阶段,因此在此基础上所开发构建的各种灾害管理系统还不能完全满足灾害管理的需要。对此从灾害管理与经济建设的关系、灾害管理的计算机模拟以及人工神经网络与灾害管理系统的结合三方面进行了分析,将上述内容列入灾害管理系统中,使之更加完善。     

Which survey indicators are useful for monitoring consumption? Evidence from European countries

This paper assesses the information content of two survey indicators for consumption developments in the near future for eight European countries in the period 1985–1998. Empirical work on this topic typically focuses on consumer confidence, the perceptions of buyers of consumption goods. This paper examines whether perceptions of sellers of consumption goods, measured by retail trade surveys, may also improve short‐term monitoring of consumption. We find that both consumer confidence and retailer confidence embody valuable information, when analysed in isolation. For France, Italy and Spain we conclude that adding retail confidence does not improve the indicator model once consumer confidence has been included. For the UK the reverse case is obtained. For the remaining four countries we show that combining consumer sentiment and retail trade confidence into a composite indicator leads to optimal results. Our results suggest that incorporating information from retail trade surveys may offer significant benefits for the analysis of short‐term prospects of consumption. Copyright © 2004 John Wiley & Sons, Ltd.     

带电粒子作同频旋转振动的辐射

根据振动电偶极矩产生的辐射场的矢势,导出带电粒子作同频旋转振动的辐射,并讨论其辐射的特点.     

两步法磷酸生产余热回收改造及热经济学分析

中国磷酸生产过程中的热浪费和热污染问题非常严重。解决这一问题将带来巨大的经济效益和社会效益。该文分别从能和可用能两个角度对一种新的燃烧水合两步法制取磷酸系统的余热回收改造方案进行分析,得到了改造前后整个系统的能流分布和可用能流分布,以及各个环节的能效率和可用能效率,并使用热经济学分析的方法,结合环境政策和资源占有对改造前后的多元产品系统进行可用能成本折算和分析。结果表明这种余热回收改造方案在经济效益、环境保护和节约资源3个方面具有明显的优越性。     

在AutoCAD图形上直接进行数控编程的研究

本文介绍一种基于AutoCAD图形 ,用VisualBasic 5 .0为工具的交互式编程方法 ,较好地解决了数控程序的校验问题。     

Environmental Issues of Geothermal Development in Yangbajing, Tibet and the Countermeasures

The pollution source and pollution state of surface water is respectively assessed with equal-standard-pollution-load index and Nemero index, and the habitans' health is assessed as well by comparison with pre-development of geothermal field. Results show that: 1 ) Three pollutive factors obviously fail to attain the required standards and their order sorted by impact degree is As＞F- ＞S2-. 2) The Nemero index of Donggua cross section of Duilongqu River is 0. 725and the water quality is at mildly-polluted level. 3) In Lhasa River, the Nemero indexes of cross sections affected by geothermal fields are much higher than that of the unaffected one, which shows the present and potential impacts of geothermal development. 4) Much more inhabitants nearby got trichomadesis sickness after geothermal development, which shows that the surface water pollution in this area has threatened the inhabitants' health. In addition, other environmental issues caused by Yangbajing geothermal development are analyzed and some countermeasures are proposed.     

复杂回转面刀具的计算机辅助造型与加工过程仿真

加工旋转锉复杂回转面刀具时，砂轮与工件的相对运动轨迹一般是复杂运动，只有用多坐标联动的数控装置才能实现，为了验证理论推导和计算的正确性，本文对旋转锉的加工过程进行了计算机仿真，为充分利用国内外在计算机图形学和CAD方面的最新成就，本文在重庆大学机械传动国家重点实验室的Sum-CAD工作站上对引进的I-deas软件包进行了应用开发，第一次将计算机造型应用于复杂回转面刀具有成形与加工，该工作站及三维图形功能对于特种回转面刀具是一个强有力的研究工具。