Effect of cold rolling process on microstructure and mechanical properties of high strength β titanium alloy thin sheets

The microstructure and mechanical properties of Ti-3.5Al-5Mo-6V-3Cr-2Sn-0.5Fe high strength titanium alloy sheets prepared by unidirectional cold rolling and two-step cross cold rolling were investigated. Results showed that the β phase grains were refined significantly by cold rolling followed by solution treatment for a short time.Compared to unidirectional cold rolling, the short time solution treatment after two-step cross rolling could significantly reduce the non-uniformity of the microstructure of the alloy sheets. After aging treatment at 550 ℃,the anisotropy of the mechanical properties still existed in the unidirectional rolled sheets, and the tensile strength was highest along the rolling direction. After solution and aging treatment, the anisotropy of the mechanical properties of the two-step cross rolling process sheet was not obvious than unidirectional cold rolling,and alloy had good strength and plasticity matching.     

I ain’t afraid of no ghost

This paper criticizes the traditional philosophical account of the quantization of gauge theories and offers an alternative. On the received view, gauge theories resist quantization because they feature distinct mathematical representatives of the same physical state of affairs. This resistance is overcome by a sequence of ad hoc modifications, justified in part by reference to semiclassical electrodynamics. Among other things, these modifications introduce ”ghosts”: particles with unphysical properties which do not appear in asymptotic states and which are said to be purely a notational convenience. I argue that this sequence of modifications is unjustified and inadequate, making it a poor basis for the interpretation of ghosts. I then argue that gauge theories can be quantized by the same method as any other theory. On this account, ghosts are not purely notation: they are coordinates on the classical configuration space of the theory—specifically, on its gauge structure. This interpretation does not fall prey to the standard philosophical arguments against the significance of ghosts, due to Weingard. Weingard’s argumentative strategy, properly applied, in fact tells in favor of ghosts’ physical significance.     

新旧《高新技术企业认定管理办法》对比及实施效果分析

针对旧《高新技术企业认定管理办法》及实施过程中出现的问题,2008年4月14日,我国正式颁布实施新管理办法。新《办法》的出台,进一步理清了高新技术企业认定条件,并对认定标准做出了详细说明。通过梳理新旧管理办法运行机制,阐述了新旧管理办法的区别,并对新《办法》实施效果进行深入分析。     

BUF634在高频滤波器中设计方法的实现与改进

本文介绍了某型飞机机载高频滤波器的设计方法与工作原理,在此基础上对芯片BUF634的使用方法进行了阐述,并对实际应用中存在的问题进行分析,提出了改进方法。实验验证证明,该方法简单有效,适用范围广。     

TD-SCDMA基于HSUPA技术的追踪合并HARQ应用研究

TD-SCDMA采用高速上行分组接入技术是为了显著提高上行分组数据的传输速率,同时减少传输延迟.其中采用的混合自动重传技术可以提高译码的成功率,使数据传输更加可靠.阐述了混合自动重传技术的原理,提出了一种在高速上行分组接入中将追踪合并算法应用于混合自动重传技术的方案,并在专有信道模型条件下对不同参数的上行链路性能进行了...     

Ultrafastly activated needle coke as electrode material for supercapacitors

The uniform porous structure makes activated porous carbons(APCs) superior electrode material.Traditionally,APCs are produced by a combination of time-consuming high-temperature heat treatment and activation,with a production time of up to several hours.The produced APCs have relatively low specific surface area(SSA) and porosity.Therefore,the electrochemical performance is poor,which limits its application in high-power energy storage devices.Here,APCs materials are directly synthesized by a hi...     

基于PSIM的高压钠灯电子镇流器仿真分析

利用PSIM软件对高压钠灯电子镇流器的功率因数校正电路部分和全桥逆变电路进行了仿真,并结合电路的仿真波形比较了半桥逆变电路和全桥逆变电路的优缺点,同时根据提出的一种高压钠灯模型给出了灯的电压电流仿真波形.     

椰壳渣制备高比表面积活性炭

通过正交实验和单因素实验探讨了以椰壳渣为原料、KOH为活化剂制备高比表面积活性炭的最佳工艺条件.考查了炭化温度、活化温度、活化时间、活化剂料比等因素对实验结果的影响.在炭化温度为600℃、碱炭质量比为2∶1、活化温度为900℃、活化时间为90 m in条件下,制备出以微孔为主、比表面积达2 180 m2.g-1、总孔容为1.19 mL.g-1的高比表面积活性炭.     

高技术企业动态核心竞争力及其灵敏度

通过构建加权正交系数矩阵,运用双基点评价方法,对长沙高新技术开发区中的19家典型高技术企业2005-2007三年的核心竞争力进行了动态综合评价;并通过仿真计算,基于与初始贴近度标准差研究了评价指标的灵敏度。结果发现：具有较强核心竞争能力的企业在财务效果和运营能力上具有显著的优势,而在市场占有、技术创新能力和企业规模方面并未表现出较排序靠后企业具有显著优势;灵敏度效果的分析发现,共有14个评价指标相对于评价结果具有较高灵敏度。     

常温交联型高硅含量硅丙乳液的合成

利用含有碳碳双键的有机硅氧烷与其他有机硅单体聚合,制得聚硅氧烷乳液;再通过聚硅氧烷与丙烯酸酯类单体发生微乳液聚合,合成出了高硅含量硅丙乳液.并且讨论了各种工艺参数对乳液聚合的影响,最后通过正交设计试验确定了最佳的工艺条件.