国际单项体育联合会善治评价体系构建及其实证研究

基于治理理论和委托—代理模型,本研究以35 个国际单项体育联合会善治 评价为对象,设计了以透明度、程序民主、制衡、团结等维度作为关键维度的指标体系, 并使用文献资料法、问卷调查法和访谈法等方法,对数据进行搜集整理。研究发现,国 际单项体育联合会平均得分为45.5（满分100）,善治状况评价为“一般”,决策和工作 机制不透明、选举和工作程序失范、利益相关者参与不足等,导致组织内部投机主义盛 行,国际单项体育联合会合法性面临危机。研究建议：1）严格执行选举程序,健全主席 和高管资格审查机制;2）完善信息公开制度,提升组织透明度;3）规范工作流程,充 实组织行政程序正当性;4）多元主体参与,健全组织内外部审查制度;5）明确最长任 期,保证组织官员积极性。     

Nanoengineering of amino - functionalized mesoporous silica nanospheres as nanoreactors

Selective functionalization of mesoporous silica nanospheres (MSNs) is crucial for nanoengineering of MSNs. Herein, we have combined “surface-protected etching strategy” and “cationic surfactant assisted etching strategy” to prepare functionalized MSNs with externally attached amino groups. The externally attached NH2 groups endow the catalysts with excellent catalytic performance for nitroaldol reaction between nitromethane and benzaldehyde. In addition, those NH2-MSNs can also be used to support gold nanoparticles, which display very good catalytic performance for reduction of 4-nitrophenol. It can be envisioned that the synthesis protocol developed in this work could also be extended to nanoengineered MSNs, which provides opportunities for nanoreactors design.     

Dynamic Dominating Set and Turbo-Charging Greedy Heuristics

The main purpose of this paper is to exposit two very different, but very general, motivational schemes in the art of parameterization and a concrete example connecting them. We introduce a dynamic version of the DOMINATING SET problem and prove that it is fixed-parameter tractable（FPT）. The problem is motivated by settings where problem instances evolve. It also arises in the quest to improve a natural greedy heuristic for the DOMINATING SET problem.     

Synthesis of the 3D porous carbon-manganese oxide (3D-C@MnO) nanocomposite and its supercapacitor behavior study

A 3D porous carbon-manganese oxide ([email protected]) nanocomposite is successfully synthesized via a thermal plasma deposition method. The chemical bonds and compositions, phase structures, surface morphologies, etc. of as-obtained [email protected] nanocomposite were characterized by the various equipment, such as X-ray diffractometer, X-ray photoelectron spectroscopy, and electron microscopes. The electrochemical performances of the [email protected] nanocomposite electrode showed a specific capacitance of 780 F g^?1 at a current density of 2 A g^?1 and a capacitance retention rate of 99% after 5000 charge-discharge cycles at a high current density of 10 A g^?1. These excellent capacitive performances may be attributed to the encapsulation of MnO nanoparticles by porous carbon sheets in the [email protected] MnO nanocomposite structure. It is believed that the carbon-encapsulated MnO nanoparticles can be protected from a volume deformation during the charge adsorption/desorption cycle and can be electrically improved by the encapsulated carbon sheets, resulting in better overall capacitive performance. In addition, this study also demonstrates the practical applicability by assembling a supercapacitor using the as-obtained [email protected] nanocomposite to glow a light emitting diode.     

Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques

In the present study, nano-sized SiC (0, 0.3, 0.5, 1.0 and 1.5 vol%) reinforced aluminum (Al) metal matrix composites were fabricated by microwave sintering and hot extrusion techniques. The structural (XRD, SEM), mechanical (nanoindentation, compression, tensile) and thermal properties (co-efficient of thermal expansion- CTE) of the developed Al-SiC nanocomposites were studied. The SEM/EDS mapping images show a homogeneous distribution of SiC nanoparticles into the Al matrix. A significant increase in the strength (compressive and tensile) of the Al-SiC nanocomposites with the addition of SiC content is observed. However, it is noticed that the ductility of Al-SiC nanocomposites decreases with increasing volume fraction of SiC. The thermal analysis indicates that CTE of Al-SiC nanocomposites decreases with the progressive addition of hard SiC nanoparticles. Overall, hot extruded Al 1.5 vol% SiC nanocomposites exhibited the best mechanical and thermal performance as compared to the other developed Al-SiC nanocomposites.     

Stimuli-responsive polymeric materials for human health applications

Stimuli-responsive polymers have the extraor- dinary ability to change their physical and/or chemical state after they ＂detect＂ a change in their environment; their response depends dramatically on their chemical compo- sition. This property has been used for a plethora of applications; this review highlights their utility for human health. Specifically, this review will highlight efforts in the areas of sensing and biosensing, antimicrobial/antifouling coatings, tissue engineering and regenerative medicine, and drug delivery. Specific examples are given in each of these areas, with some focus on our work engineering poly（N- isopropylacrylamide）-based microgels and other respon- sive systems.     

Sonochemical synthesis of nanostructured nickel hydroxide as an electrode material for improved electrochemical energy storage application

A facile and fast approach for the synthesis of a nanostructured nickel hydroxide(Ni(OH)_2) via sonochemical technique is reported in the present study. The X-ray diffraction results confirmed that the synthesized Ni(OH)_2 was oriented in β-phase of hexagonal brucite structure. The nanostructured Ni(OH)_2 electrode exhibited the maximum specific capacitance of 1256 F/g at a current density of 200 mA/g in 1 M KOH_((aq)). Ni(OH)_2 electrodes exhibited the pseudocapacitive behavior due to the presence of redox reaction. It also exhibited long-term cyclic stability of 85% after 2000 cycles, suggesting that the nanostructured Ni(OH)_2 electrode will play a promising role for high performance supercapacitor application.     

Studies on induction hardening of powder-metallurgy-processed Fe-Cr/Mo alloys

Induction hardening of dense Fe-Cr/Mo alloys processed via the powder-metallurgy route was studied. The Fe-3Cr-0.5Mo, Fe-1.5Cr-0.2Mo, and Fe-0.85Mo pre-alloyed powders were mixed with 0.4wt%, 0.6wt%, and 0.8wt% C and compacted at 500, 600, and 700 MPa, respectively. The compacts were sintered at 1473 K for 1 h and then cooled at 6 K/min. Ferrite with pearlite was mostly observed in the sintered alloys with 0.4wt% C, whereas a carbide network was also present in the alloys with 0.8wt% C. Graphite at prior particle boundaries led to deterioration of the mechanical properties of alloys with 0.8wt% C, whereas no significant induction hardening was achieved in alloys with 0.4wt% C. Among the investigated samples, alloys with 0.6wt% C exhibited the highest strength and ductility and were found to be suitable for induction hardening. The hardening was carried out at a frequency of 2.0 kHz for 2-3 s. A case depth of 2.5 mm was achieved while maintaining the bulk (interior) hardness of approximately HV 230. A martensitic structure was observed on the outer periphery of the samples. The hardness varied from HV 600 to HV 375 from the sample surface to the interior of the case hardened region. The best combination of properties and hardening depth was achieved in case of the Fe-1.5Cr-0.2Mo alloy with 0.6wt% C.