Phosphorus partitioning and recovery of low-phosphorus iron-rich compounds through physical separation of Linz-Donawitz slag

The Linz-Donawitz (LD) steelmaking process produces LD slag at a rate of about 125 kg/t. After metallic scrap recovery, the non-metallic LD slag is rejected because its physical/chemical properties are unsuitable for recycling. X-ray diffraction (XRD) studies have indicated that non-metallic LD slag contains a substantial quantity of mineral phases such as di- and tricalcium silicates. The availability of these mineral phases indicates that LD slag can be recycled by iron (Fe)-ore sintering. However, the presence of 1.2wt% phosphorus (P) in the slag renders the material unsuitable for sintering operations. Electron probe microscopic analysis (EPMA) studies indicated concentration of phosphorus in dicalcium silicate phase as calcium phosphate. The Fe-bearing phases (i.e., wustite and dicalcium ferrite) showed comparatively lower concentrations of P compared with other phases in the slag. Attempts were made to lower the P content of LD slag by adopting various beneficiation techniques. Dry high-intensity magnetic separation and jigging were performed on as-received samples with particle sizes of 6 and 3 mm. Spiral separation was conducted using samples ground to sizes of less than 1 and 0.5 mm. Among these studies, grinding to 0.5 mm followed by spiral concentration demonstrated the best results, yielding a concentrate with about 0.75wt% P and 45wt% Fe.     

Effects of gadolinium addition on the microstructure and mechanical properties of Mg-9Al alloy

This research aims to study the significance of Gd addition (0wt%-2wt%) on the microstructure and mechanical properties of Mg-9Al alloy. The effect of Gd addition on the microstructure was investigated via X-ray diffraction (XRD), optical microscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The Mg-9Al alloy contained two phases, α-Mg and β-Mg17Al12. Alloying with Gd led to the emergence of a new rectangular-shaped phase, Al₂Gd. The grain size also decreased marginally upon Gd addition. The ultimate tensile strength and microhardness of Mg-9Al alloy increased by 23% and 19%, respectively, upon 1.5wt% Gd addition. We observed that, although Mg-9Al-2.0Gd alloy exhibited the smallest grain size (181 μm) and the highest dislocation density (5.1×1010 m-2) among the investigated compositions, the Mg-9Al-1.5Gd alloy displayed the best mechanical properties. This anomalous behavior was observed because the Al₂Gd phase was uniformly distributed and present in abundance in Mg-9Al-1.5Gd alloy, whereas it was coarsened and asymmetrically conglomerated in Mg-9Al-2.0Gd.     

Settling characteristics of ultrafine iron ore slimes

The slurry settling characteristics are the most important to design a thickener in process industries. In this work, the iron ore slurry from the screw classifier overflow was used for the settling study. It was observed that the original slurry exhibited a low settling velocity and a turbid supernatant during the settling process. Commercial flocculating agents with anionic, cationic, and nonionic characters were used to improve the settling behavior of suspensions, which were added into the slurry at different ranges of slurry pH values, respectively. The settling results show that the use of flocculants increase the settling rate by several times. Compared with the cationic and nonionic flocculants, the anionic flocculant is more effective in enhancing the slurry settling rate. The small dose of the anionic flocculant is found to be more effective, but the other flocculants are less effective even at higher dosages. The simulation of an industrial thickener was carried out based on the laboratory settling data, and the appropriate design and selection parameters of the industrial thickener were estimated.     

Photo-induced optical changes in GexAs40Se60-x thin films

Ge-As-Se chalcogenide thin films show a wide range of photosensitivity, which is utilized for the fabrication of micro-optical elements for integrated optics. The photosensitivity of GexAs40Se60?x(x=0,15) chalcogenide thin films for UV light was presented. For that purpose, the bulk samples of GexAs40Se60?x(x=0,15) chalcogenide glasses were prepared using conventional melt quenching technique, and thin films were prepared using thermal evaporation technique. These thin films were exposed to UV light for two hours. Amorphous natures of bulk samples and thin films were verified by XRD and chemical compositions were verified by EDX measurements. The thicknesses of the thin films were measured using a thickness profilometer. Linear optical analysis of these thin films was done using transmission spectra in wavelength range of 300?900 nm. Optical bandgap was determined by first peak of transmission derivative as well as extrapol ation of Tauc’s plot. R2 analysis was done using R software to ensure that the material is indirect bandgap material. It is observed that two hours UV exposure causes photo-darkening along with photo-expansion in As40Se60 thin films, while photo-bleach ing and photo-densification for Ge15As40Se45 thin films. However, the amounts of photo-induced optical changes for Ge15As40Se45 thin films are smaller than those for As40Se60 thin films. The changes in optical absorption, bandgap and thickness are understood base d on the bonding rearrangement caused by UV exposure.     

Comparison of TiAlN,AlCrN, and AlCrN/TiAlN coatings for cutting-tool applications

Monolayer and bilayer coatings of TiAlN, AlCrN, and AlCrN/TiAlN were deposited onto tungsten carbide inserts using the plasma enhanced physical vapor deposition process. The microstructures of the coatings were characterized using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The SEM micrographs revealed that the AlCrN and AlCrN/TiAlN coatings were uniform and highly dense and contained only a limited number of microvoids. The TiAlN coating was non-uniform and highly porous and contained more micro droplets. The hardness and scratch resistance of the specimens were measured using a nanoindentation tester and scratch tester, respectively. Different phases formed in the coatings were analyzed by X-ray diffraction (XRD). The AlCrN/TiAlN coating exhibited a higher hardness (32.75 GPa), a higher Young’s modulus (561.97 GPa), and superior scratch resistance (L_CN = 46 N) compared to conventional coatings such as TiAlN, AlCrN, and TiN.     

Basin Geomorphology and Drainage Morphometry Parame-ters Used as Indicators for Groundwater Prospect：Insight from Geographical Information System (GIS) Technique

Influence of structural and lithological controls of various drainage patterns and their stream orientations (for 2nd, 3rd and 4th order steams) were identified to evaluate the direction and controllin...     

A brief survey of computerized expert systems for crop protection being used in India

In the recent years, a plethora of computerized expert systems has been developed for various sectors of agriculture in India. The availability of low cost computers, agricultural knowledge and information technology professionals are the principal reasons for the development of so many agricultural expert systems. Among all agricultural expert systems, the expert systems for crop protection need special mention. These expert systems are meant to be used by farmers and other persons without much experience of using computers. Hence, special care must be taken while developing them. The current paper develops a taxonomy for the expert systems for crop protection and briefly discusses four such expert systems for crop protection being used in India.     

Human oestrogen receptor cDNA: sequence, expression and homology to v-erb-A

We have cloned and sequenced the complete complementary DNA of the oestrogen receptor (ER) present in the breast cancer cell line MCF-7. The expression of the ER cDNA in HeLa cells produces a protein that has the same relative molecular mass and binds oestradiol with the same affinity as the MCF-7 ER. There is extensive homology between the ER and the erb-A protein of the oncogenic avian erythroblastosis virus.