催化裂化油浆系统防垢剂的评价方法

建立了文题的评价方法,确立了评价条件。通过实验证明,用该法评价防垢剂的防垢效果是确实可行的,能明显地区分防垢剂的好坏,且具有设备简单、方法简便、时间短等优点。聚异丁烯硫代磷酸盐用作油浆防垢剂具有防垢效果。     

Characterization of Cu3P phase in Sn3.0Ag0.5Cu0.5P/Cu solder joints

This article reports the effects of phosphorus addition on the melting behavior, microstructure, and mechanical properties of Sn3.0Ag0.SCu solder. The melting behavior of the solder alloys was determined by differential scanning calorimetry. The interracial micro- structure and phase composition of solder/Cu joints were studied by scanning electron microscopy and energy dispersive spectrometry. Thermodynamics of Cu-P phase formation at the interface between Sn3.0Ag0.5Cu0.5P solder and the Cu substrate was characterized. The results indicate that P addition into Sn3.0Ag0.5Cu solder can change the microstructure and cause the appearance of rod-like CuaP phase which is distributed randomly in the solder bulk. The Sn3.0Ag0.5Cu0.5P joint shows a mixture of ductile and brittle fracture after shear test- ing. Meanwhile, the solidus temperature of Sn3.0Ag0.5Cu solder is slightly enhanced with P addition.     

基于低温液氮吸附法的煤岩孔隙分形特征

为研究沁水盆地中高煤级煤的孔隙结构特征,采用低温液氮吸附实验测定了不同煤样比表面积及孔径分布数据,依据吸附-解吸曲线和分形维数对煤岩孔隙系统进行分类.结果表明:煤层微小孔较发育,具有比表面积适中(0.418～0.902 m2/g)、平均孔径小(14.6～21.0nm)、孔容小(0.001 86～0.004 53 cm3...     

Nimda.e蠕虫病毒的诊治方法

指出了Nimda蠕虫病毒是一种通过网络传播、危害较大的计算机病毒，而Nimda．e蠕虫病毒是其中的一种变种，介绍了此病毒的特征，给出了一种比较好的诊断和清除该病毒的方法．     

基于单稳态电路的PFM控制器设计

在分析脉冲频率调制(PFM)对开关电源轻负载效率提升的基础上,设计了一款新颖的PFM升压DC-DC转换器控制芯片,内部采用独特的低压偏置产生电路和单稳态电路,结构简单(仅有21个双极型晶体管--BJT(bipolar junction transistor),它与外接高性能元件配合构成驱动LED(lightemitting diode)的高效升压电路.HSPICE仿真结果表明:在BCD-0.6 μm-30 V工艺下,最低工作电压只需0.9 V,效率高达94 %以上,达到了设计预期的结果,具有很好的应用前景.     

撞击流中单颗粒运动行为的数值模拟

通过采用格子波耳兹曼方法模拟撞击流流场,采用拉格朗日法跟踪颗粒相,对单颗粒在撞击流中的行为进行了数值模拟,得到了不同Re数和不同喷嘴间距H与喷嘴高度W比值(H/W=1,2,4)时颗粒的运动轨迹图,以及颗粒在流场中的最大渗入深度和停留时间.同时,对颗粒在湍流撞击流中的运动规律也进行了初步探讨.计算结果表明,当H/W一定时,随着Re的增大,渗入深度变长,停留时间却变短;而当Re不变时,随着H/W的变大,渗入深度和停留时间都变长.     

Evaluation of Multi-Scale Full Waveform Inversion with Marine Vertical Cable Data

Seismic illumination plays an important role in subsurface imaging. A better image can be expected either through optimizing acquisition geometry or introducing more advanced seismic mi-gration and/or ...     

An Evaluation of Reverse-Time Imaging of Clustering Earthquakes

Clustering earthquakes refer to the seismic events that occur closely with each other in time and space. Because their overlapping waveform records make it difficult to pick the first arrivals, the hyp...