提高大学生上课出勤率的工作方案探索

高校的学风建设对教育质量的提高有着重要作用,而大学生上课出勤率问题也越来越受到高校的关注.目前,大学生缺勤现象十分普遍,这一问题不仅影响了高校教学工作的正常开展与大学生专业知识水平的提高,而且对高校的声誉也造成不好的影响.因此,大学生的上课出勤率问题已成为高校教学与管理不能忽视的重要问题,对这一问题的研究越来越具有实际的意义.     

内燃机配气机构传动链脱节概率

以某型发动机配气机构传动链为研究对象,应用随机摄动和概率可靠性等分析方法,建立了配气机构脱节概率可靠性数学模型.当配气机构基本随机变量为正态分布时,提出了传动链脱节的可靠性分析方法.通过算例分析获得了凸轮在不同运动阶段的传动链脱节概率,以及在不同转速下的脱节失效概率,并且随着转速升高传动链发生脱节的概率也会升高,与实际情况相符合,进一步表明了所提方法的正确性.此外,通过分析脱节的原因,提出了为降低脱节概率而应采取的方法,为今后内燃机配气机构传动链的可靠性设计提供了理论依据.     

Uncertainty in crossing time of 2 °C warming threshold over China

The 2 °C warming target has been used widely in global and regional climate change research. Previous studies have shown large uncertainties in the time when surface air temperature (SAT) change over China will reach 2 °C relative to the pre-industrial era. To understand the uncertainties, we analyzed the projected SAT in the twenty-first century using 40 state-of-the-art climate models under two Representative Concentration Pathways (RCP4.5 and RCP8.5) from the Coupled Model Intercomparison Project Phase 5. The 2 °C threshold-crossing time (TCT) of SAT averaged across China was around 2033 and 2029 for RCP4.5 and RCP8.5, respectively. Considering a ±1σ range of intermodel SAT change, the upper and lower bounds of the 2 °C TCT could differ by about 25 years or even more. Uncertainty in the projected SAT and the warming rate around the TCT are the two main factors responsible for the TCT uncertainty. The former is determined by the climate sensitivity represented by the global mean surface temperature response. About 45 % of the intermodel variance of the projected 2 °C TCT for averaged SAT over China can be explained by climate sensitivity across the models, which is contributed mainly by central and southern China. In a climate more sensitive to CO₂ forcing, stronger greenhouse effect, less stratus cloud over the East Asian monsoon region, and less snow cover on the Tibetan Plateau result in increased downward longwave radiation, increased shortwave radiation, and decreased shortwave radiation reflected by the surface, respectively, all of which may advance the TCT.     

Effect of Y_2O_3 content in the pack mixtures on microstructure and oxidation resistance of B–Y modified silicide coating

B–Y modified silicide coatings were prepared on Nb–Si based alloy by pack cementation at 1300 ℃ for 10 h. The effect of Y_2O_3 content in the pack mixtures on microstructure and oxidation resistance of the coatings was investigated. The results show that the four coatings have similar structures, which possess a(Nb,X)Si_2 outer layer and a(Nb,X)_5Si_3 transitional layer. Y_2O_3 content in the pack mixtures has an obvious effect on the Si content in the coating. The mass gains of the coatings prepared with 0.5, 1, 2 and 3 wt% Y_2O_3 in pack mixtures are 2.33, 1.96, 2.05 and 2.86 mg/cm~2 after oxidation at 1250 ℃ for 100 h, respectively. The coating prepared with 1 wt% Y_2O_3 exhibits the best oxidation resistance due to the formation of a dense glass-like borosilicate scale.     

Atomic layer deposition on Pd nanocrystals for forming Pd-TiO2 interface toward enhanced CO oxidation

Pd typically exhibits relatively low catalytic activity in CO oxidation, as CO is apt to be adsorbed on Pd to poison the surface for O2 activation. In this Letter, we report that this limitation can be overcome by integrating Pd with TiO2. The TiO2 was coated on Pd nanocubes with a controllable thickness using atomic layer deposition (ALD) method. Given the different work functions of TiO2 and Pd, the electrons in TiO2 semiconductor will flow toward Pd. With the electron density increased on Pd, the adsorption of CO to Pd will be weakened while the oxygen activation can be facilitated. Meanwhile, the interface-confined sites at Pd-TiO2 may further enhance the oxygen activation. As the species adsorption and activation are strongly correlated with electron density, the performance of Pd-TiO2 in CO oxidation turns out to depend on the TiO2 thickness, which determines the number of transferred electrons, within a certain range (<1.8 nm). This work provides a new strategy for enhancing catalytic performance through tailoring charge densities in hybrid catalysts.     

数据中心启发式反向人工蜂群虚拟机整合节能策略

针对数据密集型作业的特点,提出一个基于CPU和图形处理器(GPU)两个影响因素构建计算节点的能耗评估模型.该模型基于原虚拟机选择节能算法(ABCS)在虚拟机选择节能策略中的能效优势,进一步利用启发式思想改进蜂群优化算法,寻求虚拟机整合的最优解.在CloudSim 3.0云计算模拟器中的实验结果表明,启发式反向蜂群算法能在保证服务质量的前提下,有效降低虚拟机迁移次数,进而降低数据中心的能耗(节能25%~30%).     

基于混合DBN的海上编队通信链路威胁估计

针对海上编队通信链路威胁估计涉及因素多、知识表示与推理存在不确定性等问题,分析了海上编队通信链路威胁要素,依据要素间因果关系建立了通信链路威胁估计的混合动态贝叶斯网络(DBN)模型,提出了混合DBN模型中连续型网络节点变量的学习方法。仿真分析证实了该方法的有效性和可操作性。     

Annealing-induced interfacial toughening using a molecular nanolayer

Self-assembled molecular nanolayers (MNLs) composed of short organic chains and terminated with desired functional groups are attractive for modifying surface properties for a variety of applications. For example, organosilane MNLs are used as lubricants, in nanolithography, for corrosion protection and in the crystallization of biominerals. Recent work has explored uses of MNLs at thin-film interfaces, both as active components in molecular devices, and as passive layers, inhibiting interfacial diffusion, promoting adhesion and toughening brittle nanoporous structures. The relatively low stability of MNLs on surfaces at temperatures above 350-400 degrees C (refs 12, 13), as a result of desorption or degradation, limits the use of surface MNLs in high-temperature applications. Here we harness MNLs at thin-film interfaces at temperatures higher than the MNL desorption temperature to fortify copper-dielectric interfaces relevant to wiring in micro- and nano-electronic devices. Annealing Cu/MNL/SiO2 structures at 400-700 degrees C results in interfaces that are five times tougher than pristine Cu/SiO2 structures, yielding values exceeding approximately 20 J m(-2). Previously, similarly high toughness values have only been obtained using micrometre-thick interfacial layers. Electron spectroscopy of fracture surfaces and density functional theory modelling of molecular stretching and fracture show that toughening arises from thermally activated interfacial siloxane bridging that enables the MNL to be strongly linked to both the adjacent layers at the interface, and suppresses MNL desorption. We anticipate that our findings will open up opportunities for molecular-level tailoring of a variety of interfacial properties, at processing temperatures higher than previously envisaged, for applications where microlayers are not a viable option-such as in nanodevices or in thermally resistant molecular-inorganic hybrid devices.     

Structural definition of a conserved neutralization epitope on HIV-1 gp120

The remarkable diversity, glycosylation and conformational flexibility of the human immunodeficiency virus type 1 (HIV-1) envelope (Env), including substantial rearrangement of the gp120 glycoprotein upon binding the CD4 receptor, allow it to evade antibody-mediated neutralization. Despite this complexity, the HIV-1 Env must retain conserved determinants that mediate CD4 binding. To evaluate how these determinants might provide opportunities for antibody recognition, we created variants of gp120 stabilized in the CD4-bound state, assessed binding of CD4 and of receptor-binding-site antibodies, and determined the structure at 2.3 A resolution of the broadly neutralizing antibody b12 in complex with gp120. b12 binds to a conformationally invariant surface that overlaps a distinct subset of the CD4-binding site. This surface is involved in the metastable attachment of CD4, before the gp120 rearrangement required for stable engagement. A site of vulnerability, related to a functional requirement for efficient association with CD4, can therefore be targeted by antibody to neutralize HIV-1.     

A second generation human haplotype map of over 3.1 million SNPs

We describe the Phase II HapMap, which characterizes over 3.1 million human single nucleotide polymorphisms (SNPs) genotyped in 270 individuals from four geographically diverse populations and includes 25-35% of common SNP variation in the populations surveyed. The map is estimated to capture untyped common variation with an average maximum r2 of between 0.9 and 0.96 depending on population. We demonstrate that the current generation of commercial genome-wide genotyping products captures common Phase II SNPs with an average maximum r2 of up to 0.8 in African and up to 0.95 in non-African populations, and that potential gains in power in association studies can be obtained through imputation. These data also reveal novel aspects of the structure of linkage disequilibrium. We show that 10-30% of pairs of individuals within a population share at least one region of extended genetic identity arising from recent ancestry and that up to 1% of all common variants are untaggable, primarily because they lie within recombination hotspots. We show that recombination rates vary systematically around genes and between genes of different function. Finally, we demonstrate increased differentiation at non-synonymous, compared to synonymous, SNPs, resulting from systematic differences in the strength or efficacy of natural selection between populations.