四川大眼隐翅虫属研究（鞘翅目：隐翅虫科，大眼隐翅虫亚科）缘隐翅虫亚属（Ⅲ）

涉及大眼隐翅虫属，缘隐翅虫亚属的１１个种。列出种检索表、引证、观察标本及地理分布。研究标本保存在四川师院生物系。     

水分子振动逆问题研究

在ＨＯＨ角弯曲柔度极大的条件下，计算得到了能完全准确预测Ｄ＿２Ｏ分子简正频率的Ｈ＿２Ｏ分子柔度，并讨论了Ｈ＿２Ｏ分子的简正模式。     

分散控制系统稳定化的新方法

本文从实际考虑提出了一种使分散控制系统稳定的新方法。这是一种最优的稳定方法。它不仅使反馈控制器的结构具有站间的通讯费用最低的特点，而且也使控制结构有最少的通道数。数值计算的例子表明了本文所提方法的正确性和可操作性。     

确定事件视界的新公式

~~     

Abnormal pattern detected in fragile-X patients by pulsed-field gel electrophoresis.

The fragile-X syndrome is the most frequent inherited form of mental retardation, with an incidence of 1 in 1,500 males. It is characterized by the presence of a fragile site at Xq27.3 induced in vitro by folate deprivation or by inhibitors of deoxynucleotide synthesis. Its mode of inheritance is unusual for an X-linked trait, with incomplete penetrance in both males and females. Some phenotypically normal males transmit the mutation to all their daughters who rarely express any symptoms, but penetrance is high in sons and daughters of these carrier women. Genetic and physical mapping of the Xq27-q28 region has confirmed that the disease locus is located at or very near the fragile site. Hypotheses proposed to account for the abnormalities in the inheritance of the disease include sequence rearrangements by meiotic recombination or a mutation that affects reactivation of an inactive X chromosome during differentiation of female germ cells. To detect such rearrangements, or methylation changes that may reflect a locally inactive X chromosome, we used pulsed-field gel analysis of DNA from fragile-X patients with probes close to the fragile-X locus. The probe Do33 (DXS465) detected abnormal patterns in fragile-X patients, but not in normal controls or in non-expressing male transmitters.     

气体催化裂解法制备高纯碳纳米管的研究

利用有机气体化学裂解技术 ,用二甲苯作碳源 ,二茂铁作催化剂 ,噻吩作助长剂 ,氢气作载气 ,对碳纳米管的制备进行了研究 .研究结果表明 ,二甲苯流量、氢气流量及有机气体裂解温度等工艺参数对碳纳米管的产量及形态有很大的影响 ;在反应温度为 10 0 0～ 110 0℃ ,氢气流量为 15 0mL·min- 1,二甲苯的流量为 0 .12 1mL·min- 1时 ,能获得直径为 4 0～ 10 0nm的碳纳米管 ,碳纳米管的纯度可达 95 %以上 .     

设备诊断专家系统的层次诊断模型

本文在讨论复杂机电系统故障特征之后,提出了诊断专家系统的层次诊断模型.该模型以对象系统的结构分级为基础,使用作者提出的征兆分析法、功能分析法和综合信号分析法等三种具体诊断方法,得到了分层适应诊断的层次诊断模型.最后介绍了以层次诊断模型为基础的汽车发动机诊断专家系统的概况.     

用测量模态阻尼和振型的方法对复合材料薄平板进行无损质量检测

复合材料薄平板经热压制成后,都需要进行质量检测。本文探索用测量模态阻尼和振型的方法,对复合材料薄平板的制作质量进行无损检测,作为对其它昂贵的无损检测方法的补充。略述用振动方法进行无损检测的原理,测量薄平板阻尼的方法以及提高测量精度的措施。还讨论在测量薄平板阻尼时可能遇到的一些特殊问题(如非线性刚度、拍、模态密集等问题);以云母基复合材料薄平板作为例子,从测量其阻尼和振型的结果,对这种板的制作质量进行讨论。     

流线型挤出模曲面构造

根据塑料挤出的特点，在编程实现对型材截面轮廓凸凹性自动判断的基础上，采用射线法与比例间隔法相结合的方法，确定流道入口圆周上型值点的位置．以三次多项式作为流道模腔型曲线的数学模型，依据流线型要求给出的初始、边界条件，得出型曲线的数学方程．构建了挤出模流道的三维参数化曲面模型．有限元分析结果显示，该方法创建的流线型流道模型，其流动稳定性和平顺性都优于直线型流道．     

Leaning Towards Agile in 21~(st) Century

Background: During the last fifteen years there ha s been an increased drive for organisations to reduce costs. From a production po int, this has often centred on lean manufacturing and JIT waste elimination proc esses. However, in 1991, the Iaccocca Institute Bethlehem P.A commissioned a re port specifically to analyse the changing nature of the marketplace. As a result , in the following year, the Agile Manufacturing Forum was initiated and the ter m ‘agile or responsive manufacturing‘ was first intr...