三旋钮高精度数字酸度计的研制

本文具有对一次仪表转换系数进行校准的功能,温度补偿及模数转换电路设计方法独特,只用一块运算放大器与一块单片模数转换电路完成了pH转换功能。     

安装误差对正交弧齿锥齿轮副接触区影响的分析

本文从理论上分析了正交弧齿锥齿轮副的各种安装误差对啮合接触区的单独影响和综合影响,建立了安装误差作用下齿面接触区的数学模型,并通过具体实例讨论了各项安装误差对啮合接触区单独影响和综合影响的程度以及综合影响的“叠加效应”和“互补效应”,提出了满足接触要求前提下降低安装要求的措施.     

产物分离固相化细胞反应器的设计和数学模型

设计了一种以挥发性产物和非挥发性底物为特征的四相反应器——分离器。在此反应器中,生物催化剂被固定在固体柱填充物上并与含有底物的液相接触,汽相流过柱子而将挥发性产物蒸发迸入汽相。反应器由同方向流的浓缩器和反方向流的分离器两个基本汽——液流部分组成。并建立了吸附的单层细胞稳态群体数学模型和反应器平衡状态模型。     

能耗率极值原理和重力理论交互作用下粗质颗粒的浓度垂线分布

本文同时运用能耗率极值原理和重力理论研究了固液两相流在粗质颗粒时固相浓度的垂线分布,通过探讨能耗率极值原理对“非单向性”作用问题,进一步揭示了两相流运动的机理。计算结果与实测数据有较好的吻合。其研究方法、原理、步骤也极易推广到其它各种粒径的固相。     

薄膜介质表面电荷密度测量中探头边缘效应影响的消除

本文提出了二维的探头特性函数的概念,完成了用实验方法测取探头特性函数的工作。提出了利用探头特性函数,从表面电位的分布测量值中消除边缘效应影响的理论和方法,以提高探头对电荷面分布测量的分辨能力。对实验数据经用实测的探头特性函数和消除边缘效应的方法处理后所得的结果是令人满意的。     

涂层对热电偶热电性能及大气中寿命的影响

在难熔金属热电偶表而施加涂层的目的,旨在使原仅限和真空、中性及还原气氛中测量的热电偶能在大气中使用.本文讨论涂层对难熔金属热电偶在氧化气氛的"热电势—温度","热电势—时间"的关系及其寿命的影响.具有涂层的W/M.热电偶在氧化气氛(常压下1500℃取得263小时±1%t的最高记录,而W-Re热电偶存1500℃试验的前70小时偏差也在1%t内.而没有涂层的热电偶仅支持数分钟便破坏.     

细支纱摩擦纺初探——尘笼胆结构及其安装角α对纺纱的影响

本文以细支纱摩擦纺为研究对象,利用实验测试手段研究了尘笼胆结构对吸口轴向负压和尘笼胆安装角α对加捻区轴向负压和流速分布的影响。最后,基于类似于控制论中的“黑箱”原理,采用二次正交回归设计在实验室自制单头机上进行了32支纱的纺纱试验,建立了加捻辊加稔效率、纱线品质指标及CV值与尘笼胆几何尺寸、尘笼胆安装角α、摩擦辊转速及纺纱速度间的关系,并作了分析,由此得到选取α=0°、S=6毫米左右较好的结果。     

Earthshaker: A mobile rescue robot for emergencies and disasters through teleoperation and autonomous navigation

To deal with emergencies and disasters without rescue workers being exposed to dangerous environments, this paper presents a mobile rescue robot, Earthshaker. As a combination of a tracked chassis and a six-degree-of-freedom robotic arm, as well as miscellaneous sensors and controllers, Earthshaker is capable of traversing diverse terrains and fulfilling dexterous manipulation. Specifically, Earthshaker has a unique swing arm—dozer blade structure that can help clear up cumbersome obstacles and stabilize the robot on stairs, a multimodal teleoperation system that can adapt to different transmission conditions, a depth camera-aided robotic arm and gripper that can realize semiautonomous manipulation and a LiDAR aided base that can achieve autonomous navigation in unknown areas. It was these special systems that supported Earthshaker to win the first Advanced Technology & Engineering Challenge (A-TEC) championships, standing out of 40 robots from the world and showing the efficacy of system integration and the advanced control philosophy behind it.     

Structure of the human CLC-7/Ostm1 complex reveals a novel state

CLC-7 functions as a Cl?/H+ exchanger in lysosomes. Defects in CLC-7 and its β-subunit, Ostm1, result in osteopetrosis and neurodegeneration. Here, we present the cryogenic electron microscopy (cryo-EM) structure of the human CLC-7/Ostm1 complex (HsCLC-7/Ostm1) at a resolution of 3.6 ?. Our structure reveals a new state of the CLC-7/Ostm1 heterotetramer, in which the cytoplasmic domain of CLC-7 is absent, likely due to high flexibility. The disordered cytoplasmic domain is probably not able to restrain CLC-7 subunits and thus allow their relative movements. The movements result in an approximately half smaller interface between the CLC-7 transmembrane domains than that in a previously reported CLC-7/Ostm1 structure with a well-folded cytoplasmic domain. Key interactions involving multiple osteopetrosis-related residues are affected by the interface change.