碳酸钕对AZ91合金组织的细化和腐蚀性能的影响

通过介绍实验条件实验方法及结果,并对其进行讨论,研究碳酸钕对A291合金组织的细化和腐蚀性能的影响。     

PRELIMINARY STUDY ON RETRO-REFLECTIVE COATED PAPER BASED ON MICROGLASS BEADS

INTRODUCTIONThe micro-glass bead[1-2] is a new kind of silicate material, with good properties of chemical stability, mechanical strength as well as electro-resistance. When its diameter is below 0.08mm and the reflective index is in the range of 1.9~2.1, retro-reflective characteristics can be achieved. When a beam of ray from any direction irradiates the surface of the micro-glass beads, it can be converged at the special reflective layer consisted of focuses of micro-glass beads, owing …     

美国五次并购浪潮及其历史背景

美国历史上曾发生过五次大的并购浪潮，对这段历史进行研究，对于进一步加强对我国并购活动管理工作具有重要的指导意义。     

探索学生学习效能的提高--兼数学教学活动

学生学习效能差异很大，这和内外因的各种因素有关，文章着重激发学生学习中的内驱力和教师教学方法等外驱力的作用展开探讨．     

磁放大器原理及执行器故障分析

论述了磁放大器的工作原理和特点 ,介绍了磁放大器在执行器中的应用 ,对执行器的两种常见故障作了分析     

实现汽车发动机可变气门相位的新方法

介绍一种用于双顶置凸轮轴式发动机的采用两级谐波传动的新型进气凸轮轴调相机构。它由输入刚轮（正时带轮）、柔轮、输出刚轮（与进气凸轮轴联接）、固定波发生器、动波发生器和步进电机等组成。用步进电机驱动动波发生器可改变输出、输入刚轮的相对位置，从而改变进气相位。该机构能在很大角度范围内，以小步长实现多级调相，轴向尺寸小，转动惯量小，控制驱动功率小。２００ｈ试验表明，该机构工作可靠，能够准确地根据控制信号进行凸轮轴的调相。     

Pb-Sn-Bi三元系α相固溶体的点阵参数

应用X射线衍射法测定了Pb-Sn-Bi三元系Pb基α相固溶体的点阵参数,发现点阵间距与成分呈线性变化,对两批实验数据分别进行回归分析,得到点阵参数-浓度关系的统一解析式: α=0.49495X_(Pb)+0.47813X_(Sn)+0.50629X_(Bi)。其F检验置信度大于99.9％,残余标准差σ=6.4×10~(-5) nm,分析点阵畸变的影响因素表明尺寸效应是控制固溶体点阵行为的主要因素。     

山东栎林的基本特征(Ⅰ)

本文在调查了大量样方的基础上,分析了山东栎林的种类组成和地理成分,阐述了栎林的区系特征。     

Radar Imaging Based on Iterative Algorithms

It has long been realized that the problem of radar imaging is a special case of image reconstruction in which the data are incomplete and noisy. In other fields, iterative reconstruction algorithms have been used successfully to improve the image quality. This paper studies the application of iterative algorithms in radar imaging. A discrete model is first derived, and the iterative algorithms are then adapted to radar imaging. Although such algorithms are usually time consuming, this paper shows that, if the algorithms are appropriately simplified, it is possible to realize them even in real time. The efficiency of iterative algorithms is shown through computer simulations.     

叠片式小啮合角剃齿刀设计原理

本文介绍了小啮合角剃齿刀的设计原理和有关计算公式，并给出设计实例。按本文设计的叠片式小啮合角剃齿刀通用性好，有利于减少刀具库存。