喷涂角度对螺栓表面涂层厚度均匀性的影响

针对工程中采用铝涂料涂覆螺栓时螺栓表面铝涂层易出现的厚度不均匀问题,研究喷涂角度对螺栓表面涂层均匀性的影响规律。对喷涂系统的喷嘴和螺栓进行建模,通过计算流体动力学仿真软件Fluent建立了雾化流场的气液两相流物理模型,使用DPM模型分析了流场中气相和液相的相互作用,获得了在不同角度下的喷涂流场,预测了螺栓表面液膜沉积厚度。搭建了喷涂试验系统并与模拟结果进行了验证,模拟和试验研究均表明在喷涂角度为30°时螺栓表面涂层均匀性最佳。     

基于GIS的甘南高原积温资源空间插值分析

将气象台站的海拔和经纬度位置作为影响积温空间分布的因子,采用回归分析方法建立空间插值模型,对甘南高原0℃年积温进行空间插值分析,年积温资源分布图。研究表明,在甘南高原区域尺度上,积温资源的分布主要受海拔影响,积温与海拔之间关系以二次回归模型精度最好;全区包含了从寒冷到温暖共4个热量带,积温资源量总体偏低,其中0℃年积温小于1300℃的高寒带占有主要地位。     

Attentional negativity bias moderated by positive mood arousal

Automatically allocation of more attention to negative stimuli is called emotional negativity bias. An event-related potentials (ERPs) experiment investigated whether or not this bias was altered by positive mood arousal. The results suggested that the attention bias towards negative stimuli was attenuated when positive information was accessible.     

管式浆膜蒸发器新型板片改造与开发

从结构形式、热处理、材质选择等方面对新型管式浆膜蒸发器运行中出现的引起板片爆裂、泄露进行了研究分析;并就新型板片设计、制造、试验做出探索。     

纤维素在ZnCl_2水溶液中的溶解性能及再生结构

比较了不同质量分数的ZnCl2水溶液溶解不同聚合度纤维素的能力,发现:质量分数为65.0%以下的ZnCl2水溶液不能溶解纤维素;当ZnCl2水溶液的质量分数达到或超过65.0%时,未被水分子饱和的Zn2+可与纤维素分子链作用,使纤维素溶解,且65.0%的ZnCl2水溶液的溶解效果最佳;随着纤维素聚合度的增大,其溶解性能下降;经ZnCl2水溶液溶解后的再生纤维素的聚合度下降.广角X-射线衍射(WAXD)分析表明再生纤维素为纤维素Ⅱ结晶变体;傅里叶变换红外光谱(FT-IR)显示ZnCl2水溶液是纤维素的非衍生化溶剂,且再生纤维素分子内的氢键减弱.     

Non-fragile decentralized H∞ controller design for uncertain linear systems

Considering the design problem of non-fragile decentralized H∞ controller with gain variations, the dynamic feedback controller by measurement feedback for uncertain linear systems is constructed and studied. The parameter uncertainties are considered to be unknown but norm bounded. The design procedures are investigated in terms of positive definite solutions to modify algebraic Riccati inequalities. Using information exchange among local controllers, the designed non-fragile decentralized H∞ controllers guarantee that the uncertain closed-loop linear systems are stable and with H∞ -norm bound on disturbance attenuation. A sufficient condition that there are such non-fragile H∞ controllers is obtained by algebraic Riccati inequalities. The approaches to solve modified algebraic Riccati inequalities are carried out preliminarily. Finally, a numerical example to show the validity of the proposed approach is given.     

Cluster Synchronization in a Complex Dynamical Network with Two Nonidentical Clusters

This paper further investigates cluster synchronization in a complex dynamical network with two-cluster. Each cluster contains a number of identical dynamical systems, however, the subsystems composing the two clusters can be different, i.e., the individual dynamical system in one cluster can differ from that in the other cluster. Complete synchronization within each cluster is possible only if each node from one cluster receives the same input from nodes in other cluster. In this case, the stability condition of one-cluster synchronization is known to contain two terms： the first accounts for the contribution of the inner-cluster coupling structure while the second is simply an extra linear term, which can be deduced by the ＂same-input＂ condition. Applying the connection graph stability method, the authors obtain an upper bound of input strength for one cluster if the first account is known, by which the synchronizability of cluster can be scaled. For different clusters, there are different upper bound of input strength by virtue of different dynamics and the corresponding cluster structure. Moreover, two illustrative examples are presented and the numerical simulations coincide with the theoretical analysis.     

Optimal maintenance and replacement of extraction machinery

This paper considers a problem of optimal preventive maintenance and replacement schedule of equipment devoted to extracting resources from known deposits. Typical examples are oil drills, mine shovels, etc. At most one replacement of the existing machinery by a new one is allowed. The problem is formulated as an optimal control problem subject to the state constraint that the remaining deposit at any given time is nonnegative. We show that the optimal preventive maintenance, production rates, and the replacement and salvage times of the existing machinery and the new one, if required, can be obtained by solving sequentially a series of free-end-point optimal control problems. Moreover, an algorithm based on this result is developed and used to solve two illustrative examples.     

An improved branch-and-bound algorithm to minimize the weighted flowtime on identical parallel machines with family setup times

This article investigates identical parallel machines scheduling with family setup times. The objective function being the weighted sum of completion times, the problem is known to be strongly NP-hard. We propose a constructive heuristic algorithm and three complementary lower bounds. Two of these bounds proceed by elimination of setup times or by distributing each of them to jobs of the corresponding family, while the third one is based on a lagrangian relaxation. The bounds and the heuristic are incorporated into a branch-and-bound algorithm. Experimental results obtained outperform those of the methods presented in previous works, in term of size of solved problems.     

Application of multi-resolution analysis in sonar image denoising

Sonar images have complex background, low contrast, and deteriorative edges; these characteristics make it difficult for researchers to dispose the sonar objects. The multi-resolution analysis represents the signals in different scales efficiently, which is widely used in image processing. Wavelets are successful in disposing point discontinuities in one dimension, but not in two dimensions. The finite Ridgelet transform （FRIT） deals efficiently with the singularity in high dimension. It presents three improved denoising approaches, which are based on FRIT and used in the sonar image disposal technique. By experiment and comparison with traditional methods, these approaches not only suppress the artifacts, but also obtain good effect in edge keeping and SNR of the sonar image denoising.